Where to find gasket kits?

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
Imprezive
Fourth Gear
Posts: 1428
Joined: Wed Jun 22, 2005 4:07 am
Location: Northern CA

Where to find gasket kits?

Post by Imprezive »

Alrighty, my oil pan, valve covers, and front main are leaking. So is my powersteering but thats not my main concern.

So I am looking for a full gasket kit for an ej22t. Does anyone know of any vendors that supply such a kit? Or would I be better off just spending $$$$$$$$$$ at the dealership?
1992 T-Leg = 195whp 197wtq SOLD :(
1988 4Runner RIP
2006 Suzuki DRZ400sm
2007 Miata
1994 Miata
2003 WRX Wagon
2016 Mazda 3
TheSubaruJunkie
Fourth Gear
Posts: 1140
Joined: Tue Mar 16, 2004 7:26 am
Location: Sacramento California
Contact:

Post by TheSubaruJunkie »

They are all over ebay for like $100.

-Brian
1983 Subaru GL-10 Brat
1986 Toyota 4Runner
Bheinen74
Fourth Gear
Posts: 1220
Joined: Wed Feb 16, 2005 4:54 am
Location: Iowa

Post by Bheinen74 »

just so ya know, the oil pan does not have a gasket. Its Permatex Ultra Grey..............
91 Legacy Sport Sedan 4eat
91crx si 165k
91 Civic RT4WD manual trans 168k
91crx Si 40.5k
85 BRAT Gl 140
97 SVX 74k
Imprezive
Fourth Gear
Posts: 1428
Joined: Wed Jun 22, 2005 4:07 am
Location: Northern CA

Post by Imprezive »

well whatever it is, its leaking :(

I looke don ebay.. only found the ones for the ej20g. 1st Subaru has them but they are like $200. 1st Subaru aslso have 2.2L turbo blocks!!!!
1992 T-Leg = 195whp 197wtq SOLD :(
1988 4Runner RIP
2006 Suzuki DRZ400sm
2007 Miata
1994 Miata
2003 WRX Wagon
2016 Mazda 3
555BCTurbo
Knowledgeable
Knowledgeable
Posts: 3335
Joined: Wed Feb 16, 2005 9:40 pm
Location: Oregon

Post by 555BCTurbo »

JIS Engine gaskets has them for good prices I have found on eBay...and they stock most of the Subaru stuff...
Nick

1987 Audi 4000CS quattro...soon to be 20VT
1994 Dodge Ram 2500 4x4 CTD, #11 plate, 30 psi, Scotty II intake, 4" exhaust
turboleg
Second Gear
Posts: 347
Joined: Wed Nov 22, 2006 12:17 pm
Location: Western NY

Post by turboleg »

There is a oil pan gasket available from Felpro if you want it. You can order it from autozone or advanced auto. $20 or so. I like the permatex....its cheaper. :)

I think the only difference between the EJ22T and EJ22 NA (seals and gaskets) was the head gaskets. IIRC
Last edited by turboleg on Mon Nov 27, 2006 5:50 pm, edited 2 times in total.
turboleg
Second Gear
Posts: 347
Joined: Wed Nov 22, 2006 12:17 pm
Location: Western NY

Post by turboleg »

On a second note I bought all of the gaskets your talking about for about $45 from advanced auto (partsamerica.com). And the oil pan gasket is listed at $7.77 cheaper than I thought. I would still use the permatex though.

If your going to do the front main you should probably do the cam seals at the same time. Just a few more bucks...but since you have the timing belt off it might be a good time to do it.
Legacy777
Site Admin
Site Admin
Posts: 27932
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Post by Legacy777 »

turboleg wrote:There is a oil pan gasket available from Felpro if you want it. You can order it from autozone or advanced auto. $20 or so. I like the permatex....its cheaper. :)

I think the only difference between the EJ22T and EJ22 NA (seals and gaskets) was the head gaskets. IIRC
There are a few additional gaskets with the EJ22T set.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Imprezive
Fourth Gear
Posts: 1428
Joined: Wed Jun 22, 2005 4:07 am
Location: Northern CA

Post by Imprezive »

yeah I plan on doing a buttload of maintenance in the way of new gaskets. But I want the whole kit... Last time I changed my oil I though I saw small metal flecks sooooo, I might need to do a rebuild someday sooner than I want to.
1992 T-Leg = 195whp 197wtq SOLD :(
1988 4Runner RIP
2006 Suzuki DRZ400sm
2007 Miata
1994 Miata
2003 WRX Wagon
2016 Mazda 3
Post Reply