Got a new FMIC

douglas vincent · Post by **douglas vincent** » Tue Dec 05, 2006 7:11 am

Got a new FMIC

Splinter · Post by **Splinter** » Tue Dec 05, 2006 8:03 am

oooo shiney

free5ty1e · Post by **free5ty1e** » Tue Dec 05, 2006 5:28 pm

Now that is a pretty IC setup

douglas vincent · Post by **douglas vincent** » Tue Dec 05, 2006 5:41 pm

$235 shipped!

Its for some Honda thing.... But it was a steal!

Of course I havent touched it yet, so it may be crap.

It looks like I will be cutting my bumper beam after all.......

neonglh · Post by **neonglh** » Tue Dec 05, 2006 6:25 pm

WTF I hate how all these other cars have pre-made kits, and then when I was building the neon, every single piece was custom made, including the entire exhaust, IC charge pipe, engine mounts, etc.....

It makes me wish that I had a more popular modded car

But... nice!

--mark

Imprezive · Post by **Imprezive** » Tue Dec 05, 2006 7:33 pm

If you wanted a popularly modded car you shouldnt have gotten a legacy turbo

Anywho, nice setup, what are you doing with your old setup???

neonglh · Post by **neonglh** » Tue Dec 05, 2006 7:40 pm

Trust me, the legacy is only my winter car

The neon would not last a minute in the snow! Its hard enough to drive in the rain!!!

--mark

jake15 · Post by **jake15** » Tue Dec 05, 2006 9:00 pm

i got a bumper skin thats already cut if you want it

just let me know soon so my painter wont junk it\

neonglh · Post by **neonglh** » Tue Dec 05, 2006 10:02 pm

That looks awesome

Post by **Legacy777** » Wed Dec 06, 2006 7:46 pm

I like the grill Jake!

jake15 · Post by **jake15** » Wed Dec 06, 2006 11:07 pm

Thanks guys!!

the car should be back from the painters in the next couple days, i cant wait!

555BCTurbo · Post by **555BCTurbo** » Thu Dec 07, 2006 12:12 am

Is teh Jakemobile FMICerized now?!?!

douglas vincent · Post by **douglas vincent** » Wed Dec 13, 2006 7:14 am

New FMIC showed up today....

Sucky photo, but big enough?

mattyg41383 · Post by **mattyg41383** » Wed Dec 13, 2006 7:23 pm

Doug, what size is that core? i was thinking of getting something that was about 9" tall to fit easier. but 12"s seem more common. Can anyone else chime in on the size of their core? (wow that sounded bad)

BAC5.2 · Post by **BAC5.2** » Thu Dec 14, 2006 1:01 pm

I fit a TurboXS Front Mount in my old car without too much trouble. That was about as big as an intercooler gets. It sat from the radiator support all the way to the top of the bumper beam, and was 4" thick.

neonglh · Post by **neonglh** » Thu Dec 14, 2006 3:16 pm

For you guys who know what you're talking about, give me your true opinion of ebay intercoolers like this. They are all over there, and you can get kits do fit WRX's and STi's for like 250 bucks shipped. They quote pressure drop numbers of .5 at 15 psi and 1 - 4 at 35 psi (which I doubt they actually did testing on), but if so, its really not that bad.

I have always been a fan of name brand intercoolers like spearco, treadstone, etc.... I am starting to get moved to the dark side though. A GTO friend of mine put an TurboXS intercooler on his rear mount turbo application, and the inside of his core through the inlet and outlet looked no different then our buddy's Precision intercooler ,that cost 7x as much.

So, I dont really ant hear-say here. I want actuall results. How do you people feel that are actually using this stuff? I may go with a cheaper intercooler on the neon instead of the treadstone I was planning.

--mark

Post by **Legacy777** » Thu Dec 14, 2006 8:19 pm

To be quite honest....it's just a heat exchanger core with end cap fittings welded on....unless one smooths things out on the inside....an intercooler of the same dimensions from a name brand should flow and cool the same as no-name one.

neonglh · Post by **neonglh** » Thu Dec 14, 2006 8:51 pm

There are usually differences like weld quality, number of fins / inch, etc.... But often, the cores are copied from expensive designs, so thats how they end up being the same. One thing I will let everyone know to look out for is bad end tank design. Some of the cheap ones use really poorly designed end tanks, which can kill flow, but i'd say 80% of the cheap intercoolers still use good end take design.

--mark

douglas vincent · Post by **douglas vincent** » Fri Dec 15, 2006 3:20 am

FMIC install.....

Big enough?

All the front off

Mounted

No more bumber beam

Bumber skin back on...

Still a sleeper?

Setting up Pooh for the fall.....

bmxkelowna · Post by **bmxkelowna** » Fri Dec 15, 2006 3:54 am

wow doug, you look really young lol

douglas vincent · Post by **douglas vincent** » Fri Dec 15, 2006 4:08 am

What about my wife?

Post by **Legacy777** » Fri Dec 15, 2006 5:34 pm

That's so wrong

AWD_addict · Post by **AWD_addict** » Fri Dec 15, 2006 9:26 pm

I think it should get painted black. Or front-mount Pooh like in the last pic, either way.

neonglh · Post by **neonglh** » Fri Dec 15, 2006 9:30 pm

Yeah, i always spray paint mine black, you just have to be careful to not go too thick with it. You want to get the lightest coat possible, so that you don't ruin the heat sink properties of the intercooler.

--mark

dzx · Post by **dzx** » Sun Dec 17, 2006 7:52 am

it's hanging out there anyway. I'd leave it like it is.

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

Got a new FMIC

Got a new FMIC