Lost of turbo boost..!

Collection of technical archives from the BC-BF LegacyWorks Yahoo! group.

Moderators: Helpinators, Moderators

Locked
prostho@netscape.net

Lost of turbo boost..!

Post by prostho@netscape.net »

I came back from autoX today.. car was running fine..... 0.61 boost
and running strong... when i went back home on the highway.. WOT in
4th.. the car only boost up to 0.41bar in 3000-4000RPM... normally it
would be at 0.61 bar... i downshift to 3rd and try to floor again..
same result.. 0.41bar... i feel the lost of power and the turbo boost
up slower.. anyone have any idea whats happening? no check engine
light btw...

Also, i restarted the car and see if i get back the lost boost... no
luck.. still stayed at 0.41 bar.. i will see again tommorow morning
if the boost is back to normal. if not, i will try ECU reset.


To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com



Josh Colombo

Lost of turbo boost..!

Post by Josh Colombo »

Try resetting the ecu, that would be my first choice

************************************
Josh Colombo
jcc189@psu.edu < mailto:jcc189@psu.edu>

"Life, an ever-changing melody
of beats and rhythm" - ME
************************************



-----Original Message-----
From: prostho@netscape.net [ mailto:prostho@netscape.net]
Sent: Sunday, April 08, 2001 9:21 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] Lost of turbo boost..!


I came back from autoX today.. car was running fine..... 0.61 boost
and running strong... when i went back home on the highway.. WOT in
4th.. the car only boost up to 0.41bar in 3000-4000RPM... normally it
would be at 0.61 bar... i downshift to 3rd and try to floor again..
same result.. 0.41bar... i feel the lost of power and the turbo boost
up slower.. anyone have any idea whats happening? no check engine
light btw...

Also, i restarted the car and see if i get back the lost boost... no
luck.. still stayed at 0.41 bar.. i will see again tommorow morning
if the boost is back to normal. if not, i will try ECU reset.


To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com










<http://rd.yahoo.com/M=169066.1379115.29 ... store/?yb1> Click Here!
<http://us.adserver.yahoo.com/l?M=169066 ... =237699985>

To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com



zZz <http://docs.yahoo.com/info/terms/> .
Jay Erlenbach

Lost of turbo boost..!

Post by Jay Erlenbach »

I experience the same type of problem occasionally, It
will be fine, 8.7psi then all of a sudden it will drop
to around 6, (isn't 6 the default spring weight on the
wastegate?) and a couple of minutes/hours/days later
it will go back up to 8.7 psi again. I am thinking
that perhaps the solenoid may be going bad? But I have
no idea how to begin checking it.

Jay Erlenbach
92 Legacy Turbo Sedan

--- prostho@netscape.net wrote:
> I came back from autoX today.. car was running
> fine..... 0.61 boost
> and running strong... when i went back home on the
> highway.. WOT in
> 4th.. the car only boost up to 0.41bar in
> 3000-4000RPM... normally it
> would be at 0.61 bar... i downshift to 3rd and try
> to floor again..
> same result.. 0.41bar... i feel the lost of power
> and the turbo boost
> up slower.. anyone have any idea whats happening? no
> check engine
> light btw...
>
> Also, i restarted the car and see if i get back the
> lost boost... no
> luck.. still stayed at 0.41 bar.. i will see again
> tommorow morning
> if the boost is back to normal. if not, i will try
> ECU reset.
>
>


__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/

To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com



Ricky

Lost of turbo boost..!

Post by Ricky »

I just reset my ECU... it still same at 0.38-0.41 bar... so it must
be something else... I think u are right Jay, the wastegate spring is
set at 5-6 psi according to Matt.... i will bring it to Subaru dealer
to see if they get any error codes.. but my check engine light never
came on...

Ricky
94 Turbo SportSedan

--- In BC-BFLegacyWorks@y..., Jay Erlenbach <legacy_productions@y...>
wrote:
> I experience the same type of problem occasionally, It
> will be fine, 8.7psi then all of a sudden it will drop
> to around 6, (isn't 6 the default spring weight on the
> wastegate?) and a couple of minutes/hours/days later
> it will go back up to 8.7 psi again. I am thinking
> that perhaps the solenoid may be going bad? But I have
> no idea how to begin checking it.
>
> Jay Erlenbach
> 92 Legacy Turbo Sedan



To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com



Josh Colombo

Lost of turbo boost..!

Post by Josh Colombo »

Go to my website, I've got instructions how to pull the codes from the ecu, under the notes & tips section.
www.personal.psu.edu/jcc189/subaru/subaru.html

josh

************************************
Josh Colombo
jcc189@psu.edu < mailto:jcc189@psu.edu>

"Life, an ever-changing melody
of beats and rhythm" - ME
************************************



-----Original Message-----
From: Ricky [ mailto:prostho@netscape.net]
Sent: Monday, April 09, 2001 2:16 AM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] Re: Lost of turbo boost..!


I just reset my ECU... it still same at 0.38-0.41 bar... so it must
be something else... I think u are right Jay, the wastegate spring is
set at 5-6 psi according to Matt.... i will bring it to Subaru dealer
to see if they get any error codes.. but my check engine light never
came on...

Ricky
94 Turbo SportSedan

--- In BC-BFLegacyWorks@y..., Jay Erlenbach <legacy_productions@y...>
wrote:
> I experience the same type of problem occasionally, It
> will be fine, 8.7psi then all of a sudden it will drop
> to around 6, (isn't 6 the default spring weight on the
> wastegate?) and a couple of minutes/hours/days later
> it will go back up to 8.7 psi again. I am thinking
> that perhaps the solenoid may be going bad? But I have
> no idea how to begin checking it.
>
> Jay Erlenbach
> 92 Legacy Turbo Sedan



To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com










<http://rd.yahoo.com/M=169066.1334759.29 ... EY=FOBS0C9> Click Here!
<http://us.adserver.yahoo.com/l?M=169066 ... =817061897>

To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com



zZz <http://docs.yahoo.com/info/terms/> .
Locked