After 268k, what do you think?

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
scoobiedoo22
First Gear
Posts: 144
Joined: Wed Oct 16, 2002 9:04 pm
Location: Michigan's Upper Peninsula
Contact:

After 268k, what do you think?

Post by scoobiedoo22 »

I started tearing into the motor on one of my project today, a 91ss auto with 268k on the clock. Now, I know what I saw...but what I would like to know is WHAT DO YOU THINK I should see internally on a "seasoned" ej22t with this many miles? My plans are to keep this car on the road for a few more years as a winter beater so head gaskets, timing belt, water pump/thermo, etc are in order.

This car should have been another parts car posted on the list but to be honest, there have been a few to many lately and I just wanted to say that I tried to save one. The kid I bought it from put it into a tree on the passenger side trying to, as I quote, "rally" in the subie. He bought it two months prior from his neighbor, the original owner, who was there when I picked up the car. I swear the neighbor was crying as I pulled away with the car on the dolly. I think I owe it to him to get the car back on the road.
1991 Legacy SS 5-Speed

1999 Impreza 2.5RS Coupe
scuzzy
Third Gear
Posts: 775
Joined: Sun Feb 20, 2005 1:53 am

Post by scuzzy »

the kid should be clubbed and have his license taken from him till he's 21.

A seasoned motor, depends on how it was treated in the two months that the little shit had it. Could have been beat on in which case you'd see score marks on the cylinder walls if the oil wasn't taken care of properly.

On a motor that's taken care of from birth properly, at 150k I still had the cross hatching on the cylinder walls. They say 100k is barely broken in for a subaru.

Good luck.
91 Legacy Wagon, Total Rally Car.

#82 M4 TRSCCA Rallycross

http://www.youtube.com/mobilepolice/
IronMonkeyL255
Fourth Gear
Posts: 1902
Joined: Sat Aug 09, 2003 5:02 pm
Location: Woodruff, SC

Post by IronMonkeyL255 »

Taking the heads off of my brother's '94 at 150k, it still had the factory crosshatching.
Disclaimer: If anything I post is inaccurate, please correct me. I do not wish to add to the misinformation floating around on the internet.

That being said, everything I post is accurate to the best of my knowledge.

Rio Red '91 Legacy SS
555BCTurbo
Knowledgeable
Knowledgeable
Posts: 3335
Joined: Wed Feb 16, 2005 9:40 pm
Location: Oregon

Post by 555BCTurbo »

My 22t has 215k on it and still has hatch in the cylinders...


And I just tore down a 22t with 179k on it and it did too.
Nick

1987 Audi 4000CS quattro...soon to be 20VT
1994 Dodge Ram 2500 4x4 CTD, #11 plate, 30 psi, Scotty II intake, 4" exhaust
ciper
Knowledgeable
Knowledgeable
Posts: 4388
Joined: Tue Oct 15, 2002 8:16 pm
Location: SFCA

Post by ciper »

My NA with 240k still had the cross hatching on the cylinders.
evolutionmovement
Knowledgeable
Knowledgeable
Posts: 9809
Joined: Mon Jun 16, 2003 11:20 pm
Location: Beverly, MA

Post by evolutionmovement »

My 247k N/A that burned an exhaust valve still had the crosshatching, the cams looked brand new, and the bottom end bearings looked very good. If not for that valve, I'd have no reason to believe it would've been fine for at least another 100k.
Midnight in a Perfect World on Amazon or order anywhere. The first book in a quartet chronicling the rise of a man from angry criminal to philanthropist. Midnight... is a distopic noirish novel featuring 'Duchess', a modified 1990 Subaru Legacy wagon.
Post Reply