I put EJ20G (WRX) headers on my 92 Legacy Turbo EJ22T and it made no difference at all. I sold my stock headers while still on the car, but when I did the swap, I could see that they were nearly identical except that WRX headers have an O2 sensor bung, while that bung is downstream of the turbo on the EJ22T. The WRX headers provide no performance increase and no bragging rights. Actually, the EJ22T headers and all Subaru factory turbo headers are quite good. I wouldn't waste my money monkeying around with headers. On a turbo car, a free-flowing exhaust makes a much bigger difference than anything you could do with headers
Bill Robinson
<http://rd.yahoo.com/M=201621.1431180.30 ... yahoo.com/>
www.
<http://us.adserver.yahoo.com/l?M=201621 ... =719631995>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
WRX-EJ20G Headers
Moderators: Helpinators, Moderators
-
Sam & Beth Barrett
WRX-EJ20G Headers
Bill,
That's kind of interesting you said they were identical. I have a '91 N/A and mine are completely different. Where do you live?
-Sambo
-----Original Message-----
From: William D. Robinson [mailto:vultureboy@mindspring.com]
Sent: Thursday, May 17, 2001 10:40 AM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] WRX-EJ20G Headers
I put EJ20G (WRX) headers on my 92 Legacy Turbo EJ22T and it made no difference at all. I sold my stock headers while still on the car, but when I did the swap, I could see that they were nearly identical except that WRX headers have an O2 sensor bung, while that bung is downstream of the turbo on the EJ22T. The WRX headers provide no performance increase and no bragging rights. Actually, the EJ22T headers and all Subaru factory turbo headers are quite good. I wouldn't waste my money monkeying around with headers. On a turbo car, a free-flowing exhaust makes a much bigger difference than anything you could do with headers
Bill Robinson
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
<http://rd.yahoo.com/M=201621.1431180.30 ... yahoo.com/>
www.
<http://us.adserver.yahoo.com/l?M=201621 ... =226874971>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
That's kind of interesting you said they were identical. I have a '91 N/A and mine are completely different. Where do you live?
-Sambo
-----Original Message-----
From: William D. Robinson [mailto:vultureboy@mindspring.com]
Sent: Thursday, May 17, 2001 10:40 AM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] WRX-EJ20G Headers
I put EJ20G (WRX) headers on my 92 Legacy Turbo EJ22T and it made no difference at all. I sold my stock headers while still on the car, but when I did the swap, I could see that they were nearly identical except that WRX headers have an O2 sensor bung, while that bung is downstream of the turbo on the EJ22T. The WRX headers provide no performance increase and no bragging rights. Actually, the EJ22T headers and all Subaru factory turbo headers are quite good. I wouldn't waste my money monkeying around with headers. On a turbo car, a free-flowing exhaust makes a much bigger difference than anything you could do with headers
Bill Robinson
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
<http://rd.yahoo.com/M=201621.1431180.30 ... yahoo.com/>
www.
<http://us.adserver.yahoo.com/l?M=201621 ... =226874971>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
-
daniel.wilson@db.co.nz
WRX-EJ20G Headers
Yes the headers are very similar on all the turbo models, the only
draw back with them is they are damn heavy, and the port matching is
bad. I had a set of tuned equal length extractors with matching ports
and man what a difference. But unless you go this rediculous you will
not notice any difference from the standard headers.
Dan
--- In BC-BFLegacyWorks@y..., "William D. Robinson" <vultureboy@m...>
wrote:
> I put EJ20G (WRX) headers on my 92 Legacy Turbo EJ22T and it made
no difference at all. I sold my stock headers while still on the
car, but when I did the swap, I could see that they were nearly
identical except that WRX headers have an O2 sensor bung, while that
bung is downstream of the turbo on the EJ22T. The WRX headers
provide no performance increase and no bragging rights. Actually,
the EJ22T headers and all Subaru factory turbo headers are quite
good. I wouldn't waste my money monkeying around with headers. On a
turbo car, a free-flowing exhaust makes a much bigger difference than
anything you could do with headers
>
> Bill Robinson
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
draw back with them is they are damn heavy, and the port matching is
bad. I had a set of tuned equal length extractors with matching ports
and man what a difference. But unless you go this rediculous you will
not notice any difference from the standard headers.
Dan
--- In BC-BFLegacyWorks@y..., "William D. Robinson" <vultureboy@m...>
wrote:
> I put EJ20G (WRX) headers on my 92 Legacy Turbo EJ22T and it made
no difference at all. I sold my stock headers while still on the
car, but when I did the swap, I could see that they were nearly
identical except that WRX headers have an O2 sensor bung, while that
bung is downstream of the turbo on the EJ22T. The WRX headers
provide no performance increase and no bragging rights. Actually,
the EJ22T headers and all Subaru factory turbo headers are quite
good. I wouldn't waste my money monkeying around with headers. On a
turbo car, a free-flowing exhaust makes a much bigger difference than
anything you could do with headers
>
> Bill Robinson
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
daniel.wilson@db.co.nz
WRX-EJ20G Headers
TURBO models, are very different.
The turbo ones go between the crossmember and motor where the N/A
ones go under the crossmember.
This is why I don't have the extractors any more, because I needed a
new crossmember at 2am in the morning so had to cut them up. Ouch!!!!
Very expensive lesson (these didn't cost me anything). But I am going
to have to get some made up again.
Dan
--- In BC-BFLegacyWorks@y..., "Sam & Beth Barrett" <LEVATHIAN@s...>
wrote:
> Bill,
>
> That's kind of interesting you said they were identical. I have
a '91 N/A
> and mine are completely different. Where do you live?
>
> -Sambo
> -----Original Message-----
> From: William D. Robinson [mailto:vultureboy@m...]
> Sent: Thursday, May 17, 2001 10:40 AM
> To: BC-BFLegacyWorks@y...
> Subject: [BC-BFLegacyWorks] WRX-EJ20G Headers
>
>
> I put EJ20G (WRX) headers on my 92 Legacy Turbo EJ22T and it made
no
> difference at all. I sold my stock headers while still on the car,
but when
> I did the swap, I could see that they were nearly identical except
that WRX
> headers have an O2 sensor bung, while that bung is downstream of
the turbo
> on the EJ22T. The WRX headers provide no performance increase and
no
> bragging rights. Actually, the EJ22T headers and all Subaru
factory turbo
> headers are quite good. I wouldn't waste my money monkeying around
with
> headers. On a turbo car, a free-flowing exhaust makes a much bigger
> difference than anything you could do with headers
>
> Bill Robinson
>
>
> www.
>
>
>
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
The turbo ones go between the crossmember and motor where the N/A
ones go under the crossmember.
This is why I don't have the extractors any more, because I needed a
new crossmember at 2am in the morning so had to cut them up. Ouch!!!!
Very expensive lesson (these didn't cost me anything). But I am going
to have to get some made up again.
Dan
--- In BC-BFLegacyWorks@y..., "Sam & Beth Barrett" <LEVATHIAN@s...>
wrote:
> Bill,
>
> That's kind of interesting you said they were identical. I have
a '91 N/A
> and mine are completely different. Where do you live?
>
> -Sambo
> -----Original Message-----
> From: William D. Robinson [mailto:vultureboy@m...]
> Sent: Thursday, May 17, 2001 10:40 AM
> To: BC-BFLegacyWorks@y...
> Subject: [BC-BFLegacyWorks] WRX-EJ20G Headers
>
>
> I put EJ20G (WRX) headers on my 92 Legacy Turbo EJ22T and it made
no
> difference at all. I sold my stock headers while still on the car,
but when
> I did the swap, I could see that they were nearly identical except
that WRX
> headers have an O2 sensor bung, while that bung is downstream of
the turbo
> on the EJ22T. The WRX headers provide no performance increase and
no
> bragging rights. Actually, the EJ22T headers and all Subaru
factory turbo
> headers are quite good. I wouldn't waste my money monkeying around
with
> headers. On a turbo car, a free-flowing exhaust makes a much bigger
> difference than anything you could do with headers
>
> Bill Robinson
>
>
> www.
>
>
>
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com