Well, it's here!
I was a bit hesistant to install it myself, so i actually made an
appointment with Modern Garage to have it put in.
Nevermind!
This things is really very straightforward to install, and i should
have it done tonight or tommorow, with a guide on Legacy Central to
follow.
Basically it just takes the inputs from the ECU/Igniter and diverts
them through itself, adds more power and multiple sparks across 20
degrees of rotation.
Anyone with a moderate level of electrical knowledge and a meter
could install it in probably less than 1/2 hour.
I'll let you know how it goes!
------------------------ ---------------------~-->
Small business owners...
Tell us what you think!
http://us.click.yahoo.com/vO1FAB/txzCAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
MSD DIS-2
Moderators: Helpinators, Moderators
-
Josh Colombo
MSD DIS-2
Definitely let us know how it goes dave. I am toying with doin this to my car. It's even a good help to the N/A engines as well. Also if you have not done so, get a coil pack from a 2.5 RS, it can handle more spark, I think Rod or someone has done this, and had good results.
Josh
************************************
Josh Colombo
jcc189@psu.edu < mailto:jcc189@psu.edu>
"Life, an ever-changing melody
of beats and rhythm" - ME
************************************
-----Original Message-----
From: Dave C [ mailto:legacycentral@yahoo.com]
Sent: Friday, July 27, 2001 1:12 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] MSD DIS-2
Well, it's here!
I was a bit hesistant to install it myself, so i actually made an
appointment with Modern Garage to have it put in.
Nevermind!
This things is really very straightforward to install, and i should
have it done tonight or tommorow, with a guide on Legacy Central to
follow.
Basically it just takes the inputs from the ECU/Igniter and diverts
them through itself, adds more power and multiple sparks across 20
degrees of rotation.
Anyone with a moderate level of electrical knowledge and a meter
could install it in probably less than 1/2 hour.
I'll let you know how it goes!
------------------------ ---------------------~-->
Small business owners...
Tell us what you think!
http://us.click.yahoo.com/vO1FAB/txzCAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
ADVERTISEMENT
<http://rd.yahoo.com/M=210574.1511967.30 ... 29_105_304> Lose 20 lbs by September 24th!
<http://us.adserver.yahoo.com/l?M=210574 ... =714815215>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
Josh
************************************
Josh Colombo
jcc189@psu.edu < mailto:jcc189@psu.edu>
"Life, an ever-changing melody
of beats and rhythm" - ME
************************************
-----Original Message-----
From: Dave C [ mailto:legacycentral@yahoo.com]
Sent: Friday, July 27, 2001 1:12 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] MSD DIS-2
Well, it's here!
I was a bit hesistant to install it myself, so i actually made an
appointment with Modern Garage to have it put in.
Nevermind!
This things is really very straightforward to install, and i should
have it done tonight or tommorow, with a guide on Legacy Central to
follow.
Basically it just takes the inputs from the ECU/Igniter and diverts
them through itself, adds more power and multiple sparks across 20
degrees of rotation.
Anyone with a moderate level of electrical knowledge and a meter
could install it in probably less than 1/2 hour.
I'll let you know how it goes!
------------------------ ---------------------~-->
Small business owners...
Tell us what you think!
http://us.click.yahoo.com/vO1FAB/txzCAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
ADVERTISEMENT
<http://rd.yahoo.com/M=210574.1511967.30 ... 29_105_304> Lose 20 lbs by September 24th!
<http://us.adserver.yahoo.com/l?M=210574 ... =714815215>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
-
Dave C
MSD DIS-2
It is in, and it does make a difference, but it didn't cure my miss.
I'm using a coilpack from a newer 2.2, but i'm sure it's not the same
as the RS. As for spark, we took the wire out of the pack and it was
like lightning, jumping at least 2" at times and making a loud
cracking noise...very cool.
Install is pretty straightforward if you don't assume, like we did,
and not have a voltmeter. The red wire is NOT the +, the Yellow one
is!
I'll have more info for y'all later, as well as more observations.
--- In BC-BFLegacyWorks@y..., "Josh Colombo" <jcc189@p...> wrote:
> Definitely let us know how it goes dave. I am toying with doin
this to my
> car. It's even a good help to the N/A engines as well. Also if
you have
> not done so, get a coil pack from a 2.5 RS, it can handle more
spark, I
> think Rod or someone has done this, and had good results.
>
> Josh
>
> ************************************
> Josh Colombo
> jcc189@p... <mailto:jcc189@p...>
>
> "Life, an ever-changing melody
> of beats and rhythm" - ME
> ************************************
>
>
>
>
> -----Original Message-----
> From: Dave C [mailto:legacycentral@y...]
> Sent: Friday, July 27, 2001 1:12 PM
> To: BC-BFLegacyWorks@y...
> Subject: [BC-BFLegacyWorks] MSD DIS-2
>
>
> Well, it's here!
>
> I was a bit hesistant to install it myself, so i actually made an
> appointment with Modern Garage to have it put in.
>
> Nevermind!
>
> This things is really very straightforward to install, and i should
> have it done tonight or tommorow, with a guide on Legacy Central to
> follow.
>
> Basically it just takes the inputs from the ECU/Igniter and diverts
> them through itself, adds more power and multiple sparks across 20
> degrees of rotation.
>
> Anyone with a moderate level of electrical knowledge and a meter
> could install it in probably less than 1/2 hour.
>
> I'll let you know how it goes!
>
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
------------------------ ---------------------~-->
Small business owners...
Tell us what you think!
http://us.click.yahoo.com/vO1FAB/txzCAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
I'm using a coilpack from a newer 2.2, but i'm sure it's not the same
as the RS. As for spark, we took the wire out of the pack and it was
like lightning, jumping at least 2" at times and making a loud
cracking noise...very cool.
Install is pretty straightforward if you don't assume, like we did,
and not have a voltmeter. The red wire is NOT the +, the Yellow one
is!
I'll have more info for y'all later, as well as more observations.
--- In BC-BFLegacyWorks@y..., "Josh Colombo" <jcc189@p...> wrote:
> Definitely let us know how it goes dave. I am toying with doin
this to my
> car. It's even a good help to the N/A engines as well. Also if
you have
> not done so, get a coil pack from a 2.5 RS, it can handle more
spark, I
> think Rod or someone has done this, and had good results.
>
> Josh
>
> ************************************
> Josh Colombo
> jcc189@p... <mailto:jcc189@p...>
>
> "Life, an ever-changing melody
> of beats and rhythm" - ME
> ************************************
>
>
>
>
> -----Original Message-----
> From: Dave C [mailto:legacycentral@y...]
> Sent: Friday, July 27, 2001 1:12 PM
> To: BC-BFLegacyWorks@y...
> Subject: [BC-BFLegacyWorks] MSD DIS-2
>
>
> Well, it's here!
>
> I was a bit hesistant to install it myself, so i actually made an
> appointment with Modern Garage to have it put in.
>
> Nevermind!
>
> This things is really very straightforward to install, and i should
> have it done tonight or tommorow, with a guide on Legacy Central to
> follow.
>
> Basically it just takes the inputs from the ECU/Igniter and diverts
> them through itself, adds more power and multiple sparks across 20
> degrees of rotation.
>
> Anyone with a moderate level of electrical knowledge and a meter
> could install it in probably less than 1/2 hour.
>
> I'll let you know how it goes!
>
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
------------------------ ---------------------~-->
Small business owners...
Tell us what you think!
http://us.click.yahoo.com/vO1FAB/txzCAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
Rod Grosvenor
MSD DIS-2
The RS coil that I was directed to had a 440 volt capacity as opposed to 380 volts for the stock coil. If you check www.b-spec.com, Byron`s 500+ hp impreza uses the came coil; I`ve read other articles that show high hp subies with a virtually stock ignition system. Also check www.rigoliracing.com.au, for more of the same info. See ya`--ROD (S`West)
----- Original Message -----
From: Josh Colombo <mailto:jcc189@psu.edu>
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Friday, July 27, 2001 8:31 PM
Subject: RE: [BC-BFLegacyWorks] MSD DIS-2
Definitely let us know how it goes dave. I am toying with doin this to my car. It's even a good help to the N/A engines as well. Also if you have not done so, get a coil pack from a 2.5 RS, it can handle more spark, I think Rod or someone has done this, and had good results.
Josh
************************************
Josh Colombo
jcc189@psu.edu < mailto:jcc189@psu.edu>
"Life, an ever-changing melody
of beats and rhythm" - ME
************************************
-----Original Message-----
From: Dave C [ mailto:legacycentral@yahoo.com]
Sent: Friday, July 27, 2001 1:12 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] MSD DIS-2
Well, it's here!
I was a bit hesistant to install it myself, so i actually made an
appointment with Modern Garage to have it put in.
Nevermind!
This things is really very straightforward to install, and i should
have it done tonight or tommorow, with a guide on Legacy Central to
follow.
Basically it just takes the inputs from the ECU/Igniter and diverts
them through itself, adds more power and multiple sparks across 20
degrees of rotation.
Anyone with a moderate level of electrical knowledge and a meter
could install it in probably less than 1/2 hour.
I'll let you know how it goes!
------------------------ ---------------------~-->
Small business owners...
Tell us what you think!
http://us.click.yahoo.com/vO1FAB/txzCAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
ADVERTISEMENT
<http://rd.yahoo.com/M=210574.1511967.30 ... 28_105_303> Lose 20 lbs by September 24th!
<http://us.adserver.yahoo.com/l?M=210574 ... =962674896>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
----- Original Message -----
From: Josh Colombo <mailto:jcc189@psu.edu>
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Friday, July 27, 2001 8:31 PM
Subject: RE: [BC-BFLegacyWorks] MSD DIS-2
Definitely let us know how it goes dave. I am toying with doin this to my car. It's even a good help to the N/A engines as well. Also if you have not done so, get a coil pack from a 2.5 RS, it can handle more spark, I think Rod or someone has done this, and had good results.
Josh
************************************
Josh Colombo
jcc189@psu.edu < mailto:jcc189@psu.edu>
"Life, an ever-changing melody
of beats and rhythm" - ME
************************************
-----Original Message-----
From: Dave C [ mailto:legacycentral@yahoo.com]
Sent: Friday, July 27, 2001 1:12 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] MSD DIS-2
Well, it's here!
I was a bit hesistant to install it myself, so i actually made an
appointment with Modern Garage to have it put in.
Nevermind!
This things is really very straightforward to install, and i should
have it done tonight or tommorow, with a guide on Legacy Central to
follow.
Basically it just takes the inputs from the ECU/Igniter and diverts
them through itself, adds more power and multiple sparks across 20
degrees of rotation.
Anyone with a moderate level of electrical knowledge and a meter
could install it in probably less than 1/2 hour.
I'll let you know how it goes!
------------------------ ---------------------~-->
Small business owners...
Tell us what you think!
http://us.click.yahoo.com/vO1FAB/txzCAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
ADVERTISEMENT
<http://rd.yahoo.com/M=210574.1511967.30 ... 28_105_303> Lose 20 lbs by September 24th!
<http://us.adserver.yahoo.com/l?M=210574 ... =962674896>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
-
Rod Grosvenor
MSD DIS-2
Oops! It`s www.b-specusa.com-sorry!
----- Original Message -----
From: Rod <mailto:roderic@cableone.net> Grosvenor
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Saturday, July 28, 2001 8:28 AM
Subject: Re: [BC-BFLegacyWorks] MSD DIS-2
The RS coil that I was directed to had a 440 volt capacity as opposed to 380 volts for the stock coil. If you check www.b-spec.com, Byron`s 500+ hp impreza uses the came coil; I`ve read other articles that show high hp subies with a virtually stock ignition system. Also check www.rigoliracing.com.au, for more of the same info. See ya`--ROD (S`West)
----- Original Message -----
From: Josh Colombo <mailto:jcc189@psu.edu>
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Friday, July 27, 2001 8:31 PM
Subject: RE: [BC-BFLegacyWorks] MSD DIS-2
Definitely let us know how it goes dave. I am toying with doin this to my car. It's even a good help to the N/A engines as well. Also if you have not done so, get a coil pack from a 2.5 RS, it can handle more spark, I think Rod or someone has done this, and had good results.
Josh
************************************
Josh Colombo
jcc189@psu.edu < mailto:jcc189@psu.edu>
"Life, an ever-changing melody
of beats and rhythm" - ME
************************************
-----Original Message-----
From: Dave C [ mailto:legacycentral@yahoo.com]
Sent: Friday, July 27, 2001 1:12 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] MSD DIS-2
Well, it's here!
I was a bit hesistant to install it myself, so i actually made an
appointment with Modern Garage to have it put in.
Nevermind!
This things is really very straightforward to install, and i should
have it done tonight or tommorow, with a guide on Legacy Central to
follow.
Basically it just takes the inputs from the ECU/Igniter and diverts
them through itself, adds more power and multiple sparks across 20
degrees of rotation.
Anyone with a moderate level of electrical knowledge and a meter
could install it in probably less than 1/2 hour.
I'll let you know how it goes!
------------------------ ---------------------~-->
Small business owners...
Tell us what you think!
http://us.click.yahoo.com/vO1FAB/txzCAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
ADVERTISEMENT
<http://rd.yahoo.com/M=210574.1511967.30 ... 31_105_305> Lose 20 lbs by September 24th!
<http://us.adserver.yahoo.com/l?M=210574 ... =849323976>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
----- Original Message -----
From: Rod <mailto:roderic@cableone.net> Grosvenor
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Saturday, July 28, 2001 8:28 AM
Subject: Re: [BC-BFLegacyWorks] MSD DIS-2
The RS coil that I was directed to had a 440 volt capacity as opposed to 380 volts for the stock coil. If you check www.b-spec.com, Byron`s 500+ hp impreza uses the came coil; I`ve read other articles that show high hp subies with a virtually stock ignition system. Also check www.rigoliracing.com.au, for more of the same info. See ya`--ROD (S`West)
----- Original Message -----
From: Josh Colombo <mailto:jcc189@psu.edu>
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Friday, July 27, 2001 8:31 PM
Subject: RE: [BC-BFLegacyWorks] MSD DIS-2
Definitely let us know how it goes dave. I am toying with doin this to my car. It's even a good help to the N/A engines as well. Also if you have not done so, get a coil pack from a 2.5 RS, it can handle more spark, I think Rod or someone has done this, and had good results.
Josh
************************************
Josh Colombo
jcc189@psu.edu < mailto:jcc189@psu.edu>
"Life, an ever-changing melody
of beats and rhythm" - ME
************************************
-----Original Message-----
From: Dave C [ mailto:legacycentral@yahoo.com]
Sent: Friday, July 27, 2001 1:12 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] MSD DIS-2
Well, it's here!
I was a bit hesistant to install it myself, so i actually made an
appointment with Modern Garage to have it put in.
Nevermind!
This things is really very straightforward to install, and i should
have it done tonight or tommorow, with a guide on Legacy Central to
follow.
Basically it just takes the inputs from the ECU/Igniter and diverts
them through itself, adds more power and multiple sparks across 20
degrees of rotation.
Anyone with a moderate level of electrical knowledge and a meter
could install it in probably less than 1/2 hour.
I'll let you know how it goes!
------------------------ ---------------------~-->
Small business owners...
Tell us what you think!
http://us.click.yahoo.com/vO1FAB/txzCAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
ADVERTISEMENT
<http://rd.yahoo.com/M=210574.1511967.30 ... 31_105_305> Lose 20 lbs by September 24th!
<http://us.adserver.yahoo.com/l?M=210574 ... =849323976>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
-
Jay Erlenbach
MSD DIS-2
Just curious but how does that compare to the new WRX
coil pack, and does that one fit on ours?
Jay E
--- Rod Grosvenor <roderic@cableone.net> wrote:
> RE: [BC-BFLegacyWorks] MSD DIS-2The RS coil that I
> was directed to had a 440 volt capacity as opposed
> to 380 volts for the stock coil. If you check
> www.b-spec.com, Byron`s 500+ hp impreza uses the
> came coil; I`ve read other articles that show high
> hp subies with a virtually stock ignition system.
> Also check www.rigoliracing.com.au, for more of the
> same info. See ya`--ROD (S`West)
> ----- Original Message -----
> From: Josh Colombo
> To: BC-BFLegacyWorks@yahoogroups.com
> Sent: Friday, July 27, 2001 8:31 PM
> Subject: RE: [BC-BFLegacyWorks] MSD DIS-2
>
>
> Definitely let us know how it goes dave. I am
> toying with doin this to my car. It's even a good
> help to the N/A engines as well. Also if you have
> not done so, get a coil pack from a 2.5 RS, it can
> handle more spark, I think Rod or someone has done
> this, and had good results.
>
> Josh
>
> ************************************
> Josh Colombo
> jcc189@psu.edu <mailto:jcc189@psu.edu>
>
> "Life, an ever-changing melody
> of beats and rhythm" - ME
> ************************************
>
>
>
>
>
> -----Original Message-----
> From: Dave C [mailto:legacycentral@yahoo.com]
> Sent: Friday, July 27, 2001 1:12 PM
> To: BC-BFLegacyWorks@yahoogroups.com
> Subject: [BC-BFLegacyWorks] MSD DIS-2
>
>
>
> Well, it's here!
>
> I was a bit hesistant to install it myself, so i
> actually made an
> appointment with Modern Garage to have it put in.
>
> Nevermind!
>
> This things is really very straightforward to
> install, and i should
> have it done tonight or tommorow, with a guide on
> Legacy Central to
> follow.
>
> Basically it just takes the inputs from the
> ECU/Igniter and diverts
> them through itself, adds more power and multiple
> sparks across 20
> degrees of rotation.
>
> Anyone with a moderate level of electrical
> knowledge and a meter
> could install it in probably less than 1/2 hour.
>
> I'll let you know how it goes!
>
>
>
> ------------------------
> ---------------------~-->
> Small business owners...
> Tell us what you think!
>
>
http://us.click.yahoo.com/vO1FAB/txzCAA ... /XoTolB/TM
>
>
>
---------------------------------------------------------------------~->
>
>
> To unsubscribe from this group, please send an
> email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
> ADVERTISEMENT
>
>
>
>
> To unsubscribe from this group, please send an
> email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo!
> Terms of Service.
>
>
__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/
------------------------ ---------------------~-->
Small business owners...
Tell us what you think!
http://us.click.yahoo.com/vO1FAB/txzCAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
coil pack, and does that one fit on ours?
Jay E
--- Rod Grosvenor <roderic@cableone.net> wrote:
> RE: [BC-BFLegacyWorks] MSD DIS-2The RS coil that I
> was directed to had a 440 volt capacity as opposed
> to 380 volts for the stock coil. If you check
> www.b-spec.com, Byron`s 500+ hp impreza uses the
> came coil; I`ve read other articles that show high
> hp subies with a virtually stock ignition system.
> Also check www.rigoliracing.com.au, for more of the
> same info. See ya`--ROD (S`West)
> ----- Original Message -----
> From: Josh Colombo
> To: BC-BFLegacyWorks@yahoogroups.com
> Sent: Friday, July 27, 2001 8:31 PM
> Subject: RE: [BC-BFLegacyWorks] MSD DIS-2
>
>
> Definitely let us know how it goes dave. I am
> toying with doin this to my car. It's even a good
> help to the N/A engines as well. Also if you have
> not done so, get a coil pack from a 2.5 RS, it can
> handle more spark, I think Rod or someone has done
> this, and had good results.
>
> Josh
>
> ************************************
> Josh Colombo
> jcc189@psu.edu <mailto:jcc189@psu.edu>
>
> "Life, an ever-changing melody
> of beats and rhythm" - ME
> ************************************
>
>
>
>
>
> -----Original Message-----
> From: Dave C [mailto:legacycentral@yahoo.com]
> Sent: Friday, July 27, 2001 1:12 PM
> To: BC-BFLegacyWorks@yahoogroups.com
> Subject: [BC-BFLegacyWorks] MSD DIS-2
>
>
>
> Well, it's here!
>
> I was a bit hesistant to install it myself, so i
> actually made an
> appointment with Modern Garage to have it put in.
>
> Nevermind!
>
> This things is really very straightforward to
> install, and i should
> have it done tonight or tommorow, with a guide on
> Legacy Central to
> follow.
>
> Basically it just takes the inputs from the
> ECU/Igniter and diverts
> them through itself, adds more power and multiple
> sparks across 20
> degrees of rotation.
>
> Anyone with a moderate level of electrical
> knowledge and a meter
> could install it in probably less than 1/2 hour.
>
> I'll let you know how it goes!
>
>
>
> ------------------------
> ---------------------~-->
> Small business owners...
> Tell us what you think!
>
>
http://us.click.yahoo.com/vO1FAB/txzCAA ... /XoTolB/TM
>
>
>
---------------------------------------------------------------------~->
>
>
> To unsubscribe from this group, please send an
> email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
> ADVERTISEMENT
>
>
>
>
> To unsubscribe from this group, please send an
> email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo!
> Terms of Service.
>
>
__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/
------------------------ ---------------------~-->
Small business owners...
Tell us what you think!
http://us.click.yahoo.com/vO1FAB/txzCAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
Rod Grosvenor
MSD DIS-2
Don`t know if the Wrx & the 2.5 RS coils are the same; call a local dealer & see if the part nos. match. If not, you can`t go wrong with the 2.5 coil-ROD (Az.)
----- Original Message -----
From: Jay Erlenbach <mailto:legacy_productions@yahoo.com>
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Saturday, July 28, 2001 104 AM
Subject: Re: [BC-BFLegacyWorks] MSD DIS-2
Just curious but how does that compare to the new WRX
coil pack, and does that one fit on ours?
Jay E
--- Rod Grosvenor < roderic@cableone.net> wrote:
> RE: [BC-BFLegacyWorks] MSD DIS-2The RS coil that I
> was directed to had a 440 volt capacity as opposed
> to 380 volts for the stock coil. If you check
> www.b-spec.com, Byron`s 500+ hp impreza uses the
> came coil; I`ve read other articles that show high
> hp subies with a virtually stock ignition system.
> Also check www.rigoliracing.com.au, for more of the
> same info. See ya`--ROD (S`West)
> ----- Original Message -----
> From: Josh Colombo
> To: BC-BFLegacyWorks@yahoogroups.com
> Sent: Friday, July 27, 2001 8:31 PM
> Subject: RE: [BC-BFLegacyWorks] MSD DIS-2
>
>
> Definitely let us know how it goes dave. I am
> toying with doin this to my car. It's even a good
> help to the N/A engines as well. Also if you have
> not done so, get a coil pack from a 2.5 RS, it can
> handle more spark, I think Rod or someone has done
> this, and had good results.
>
> Josh
>
> ************************************
> Josh Colombo
> jcc189@psu.edu <mailto:jcc189@psu.edu>
>
> "Life, an ever-changing melody
> of beats and rhythm" - ME
> ************************************
>
>
>
>
>
> -----Original Message-----
> From: Dave C [mailto:legacycentral@yahoo.com]
> Sent: Friday, July 27, 2001 1:12 PM
> To: BC-BFLegacyWorks@yahoogroups.com
> Subject: [BC-BFLegacyWorks] MSD DIS-2
>
>
>
> Well, it's here!
>
> I was a bit hesistant to install it myself, so i
> actually made an
> appointment with Modern Garage to have it put in.
>
> Nevermind!
>
> This things is really very straightforward to
> install, and i should
> have it done tonight or tommorow, with a guide on
> Legacy Central to
> follow.
>
> Basically it just takes the inputs from the
> ECU/Igniter and diverts
> them through itself, adds more power and multiple
> sparks across 20
> degrees of rotation.
>
> Anyone with a moderate level of electrical
> knowledge and a meter
> could install it in probably less than 1/2 hour.
>
> I'll let you know how it goes!
>
>
>
> ------------------------
> ---------------------~-->
> Small business owners...
> Tell us what you think!
>
>
http://us.click.yahoo.com/vO1FAB/txzCAA ... /XoTolB/TM
>
>
>
---------------------------------------------------------------------~->
>
>
> To unsubscribe from this group, please send an
> email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
> ADVERTISEMENT
>
>
>
>
> To unsubscribe from this group, please send an
> email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo!
> Terms of Service.
>
>
__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
ADVERTISEMENT
<http://rd.yahoo.com/M=210574.1511967.30 ... 31_105_305> Lose 20 lbs by September 24th!
<http://us.adserver.yahoo.com/l?M=210574 ... =929832263>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
----- Original Message -----
From: Jay Erlenbach <mailto:legacy_productions@yahoo.com>
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Saturday, July 28, 2001 104 AM
Subject: Re: [BC-BFLegacyWorks] MSD DIS-2
Just curious but how does that compare to the new WRX
coil pack, and does that one fit on ours?
Jay E
--- Rod Grosvenor < roderic@cableone.net> wrote:
> RE: [BC-BFLegacyWorks] MSD DIS-2The RS coil that I
> was directed to had a 440 volt capacity as opposed
> to 380 volts for the stock coil. If you check
> www.b-spec.com, Byron`s 500+ hp impreza uses the
> came coil; I`ve read other articles that show high
> hp subies with a virtually stock ignition system.
> Also check www.rigoliracing.com.au, for more of the
> same info. See ya`--ROD (S`West)
> ----- Original Message -----
> From: Josh Colombo
> To: BC-BFLegacyWorks@yahoogroups.com
> Sent: Friday, July 27, 2001 8:31 PM
> Subject: RE: [BC-BFLegacyWorks] MSD DIS-2
>
>
> Definitely let us know how it goes dave. I am
> toying with doin this to my car. It's even a good
> help to the N/A engines as well. Also if you have
> not done so, get a coil pack from a 2.5 RS, it can
> handle more spark, I think Rod or someone has done
> this, and had good results.
>
> Josh
>
> ************************************
> Josh Colombo
> jcc189@psu.edu <mailto:jcc189@psu.edu>
>
> "Life, an ever-changing melody
> of beats and rhythm" - ME
> ************************************
>
>
>
>
>
> -----Original Message-----
> From: Dave C [mailto:legacycentral@yahoo.com]
> Sent: Friday, July 27, 2001 1:12 PM
> To: BC-BFLegacyWorks@yahoogroups.com
> Subject: [BC-BFLegacyWorks] MSD DIS-2
>
>
>
> Well, it's here!
>
> I was a bit hesistant to install it myself, so i
> actually made an
> appointment with Modern Garage to have it put in.
>
> Nevermind!
>
> This things is really very straightforward to
> install, and i should
> have it done tonight or tommorow, with a guide on
> Legacy Central to
> follow.
>
> Basically it just takes the inputs from the
> ECU/Igniter and diverts
> them through itself, adds more power and multiple
> sparks across 20
> degrees of rotation.
>
> Anyone with a moderate level of electrical
> knowledge and a meter
> could install it in probably less than 1/2 hour.
>
> I'll let you know how it goes!
>
>
>
> ------------------------
> ---------------------~-->
> Small business owners...
> Tell us what you think!
>
>
http://us.click.yahoo.com/vO1FAB/txzCAA ... /XoTolB/TM
>
>
>
---------------------------------------------------------------------~->
>
>
> To unsubscribe from this group, please send an
> email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
> ADVERTISEMENT
>
>
>
>
> To unsubscribe from this group, please send an
> email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo!
> Terms of Service.
>
>
__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
ADVERTISEMENT
<http://rd.yahoo.com/M=210574.1511967.30 ... 31_105_305> Lose 20 lbs by September 24th!
<http://us.adserver.yahoo.com/l?M=210574 ... =929832263>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .