Help with the check connector

Headlights to tailights and everything in between.

Moderators: Helpinators, Moderators

Post Reply
PhyrraM
Fourth Gear
Posts: 1980
Joined: Thu Aug 11, 2005 4:34 pm
Location: Lake Elsinore, CA

Help with the check connector

Post by PhyrraM »

When I bought my SS these two wires were already removed from the black check connector.

Image

Both can be traced back to ground on the harness side.

I've scoured the diagrams I can find, including the '92 USDM manual posted here on LC. The only ground that any of the diagrams show is the one related to the engine ECU. That one is still in position in the connector. These two must go to different pins. I'm assuming they are redundant grounds intended for different computers in the vehicle.

You can see the Engine ECU ground in the 6th postion on the left.
Image

Either way, I know thay are not important at this point, but I'd like to at least find a home for them. Can anybody shed a bit of light here?
'93 Winestone SS Auto, '91 Pearl White SS.
'93 Pure White SS EJ20G slanty intercooled, SIDESWIPED! In stasis.
'94 FWD and '95 AWD Laguna Blue SVXs.
2017 Pure Red BRZ Limited w/Performance pack
Top
Post Reply

Return to “Electrical”