I was driving home, went to roll down the window and CLICK..nothing...all other windowns operate fine. I pulled the door panel off, took off the switch control thing, took it apart and cleaned the connections..reconected the switch and still nothing, I can hear the regulator click once everytime i hit the button, but the window wont move.
Could this be anything besides the window regulator?
Thanks
Did my window regulator take a poo???
Moderators: Helpinators, Moderators
Did my window regulator take a poo???
99 OBS 2.2 -auto
-
- Fifth Gear
- Posts: 3526
- Joined: Wed Jul 18, 2007 5:07 pm
- Location: Whammy!
hmmm... i'm going to watch this topic.
my passenger side front window won't go up, unless it goes all the way down as far as it can.
so for example, if i roll the window down half way, it wont go up again until i roll it down all the way.
bad connections maybe?
my passenger side front window won't go up, unless it goes all the way down as far as it can.
so for example, if i roll the window down half way, it wont go up again until i roll it down all the way.
bad connections maybe?
Zach - Legacy Frankenstin
93forestpearl wrote:Keep up the good work. You'll never know what you are capable of unless you push yourself.
Find the connector going to the motor, and apply 12v to it. There is probably 3 wires, so one will be a common ground, and the other two will determine whether the motor goes up or down.
See if it works like that, if so, it should help narrow down whether it's the switch/wiring, or motor.
Also look and make sure there's nothing lodged in the gears/mechanism of the window regulator.
See if it works like that, if so, it should help narrow down whether it's the switch/wiring, or motor.
Also look and make sure there's nothing lodged in the gears/mechanism of the window regulator.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
what can i apply 12v to it with?? I have an ohms meter but I'm not real handy with it....thanksLegacy777 wrote:Find the connector going to the motor, and apply 12v to it. There is probably 3 wires, so one will be a common ground, and the other two will determine whether the motor goes up or down.
See if it works like that, if so, it should help narrow down whether it's the switch/wiring, or motor.
Also look and make sure there's nothing lodged in the gears/mechanism of the window regulator.
99 OBS 2.2 -auto
-
- Fifth Gear
- Posts: 3526
- Joined: Wed Jul 18, 2007 5:07 pm
- Location: Whammy!
thanks guys but i actually scored the goods off a 93 leg at a local salvage yard. Got the regulator, motor, AND the window switch all for $60! Score!! Turns out the problem was either the motor or the regulator, cuz i tried both switches (new one and my old one) and they both worked fine. When i get some time i'll test the motor and the regulator to see which was the culprit.
Got the new(used) parts in tonight though, adjusting the window and getting the new unit in was a pain in the @ss though, all is good though and window works now..woot!
Got the new(used) parts in tonight though, adjusting the window and getting the new unit in was a pain in the @ss though, all is good though and window works now..woot!
99 OBS 2.2 -auto
-
- Second Gear
- Posts: 376
- Joined: Fri Mar 18, 2005 4:05 pm
- Location: chicago , IL , usa
- Contact:
wanna sell the master switch?Herm99 wrote:thanks guys but i actually scored the goods off a 93 leg at a local salvage yard. Got the regulator, motor, AND the window switch all for $60! Score!! Turns out the problem was either the motor or the regulator, cuz i tried both switches (new one and my old one) and they both worked fine. When i get some time i'll test the motor and the regulator to see which was the culprit.
Got the new(used) parts in tonight though, adjusting the window and getting the new unit in was a pain in the @ss though, all is good though and window works now..woot!
I'd like to get auto up back.
94 BC w/ AWD Sold 6/25/08
92 BJ Rust bucket gone
90 BC (I think) Stripper, gone since 2k
86 GL10 Turbo 4wd, Gone since 99
92 BJ Rust bucket gone
90 BC (I think) Stripper, gone since 2k
86 GL10 Turbo 4wd, Gone since 99