Snorkus question.

Snorkus, filters, throttle bodies and intake manifolds.

Moderators: Helpinators, Moderators

Post Reply
_Aramchek_
First Gear
Posts: 126
Joined: Wed Dec 21, 2005 10:46 pm

Snorkus question.

Post by _Aramchek_ »

So,uh is there a trick to getting that bottom bolt out,it turns and turns but never makes any progress.

Any ideas before I just cut the damn thing off?
Top
jefferson
Third Gear
Posts: 768
Joined: Sat Dec 16, 2006 4:41 am
Location: Parkville, Mo.

Post by jefferson »

I'm going to say you have some stripped threads or a captured nut that in no longer captured. Can you see the backside to see if that is the case?

Jeff
91 Black SS 5spd. Edm lights, wrx gauges in dash, 45 degree airbox, cryoed drilled and slotted brakes. Invidia divorced downpipe with custom stainless exhaust. To be installed, aluminum a-arms, manual belts, awic.
Top
_Aramchek_
First Gear
Posts: 126
Joined: Wed Dec 21, 2005 10:46 pm

Post by _Aramchek_ »

jefferson wrote:I'm going to say you have some stripped threads or a captured nut that in no longer captured. Can you see the backside to see if that is the case?

Jeff
I couldn't get around in where I could see very well today,and the light was gone by the time you replied. I'll take a look tommorow and see if either of those happens to be my problem. sounds highly plausible.
Top
_Aramchek_
First Gear
Posts: 126
Joined: Wed Dec 21, 2005 10:46 pm

Post by _Aramchek_ »

Meh,it was stripped out,I cut it off with a pocket knife and I'm very happy.
Top
Post Reply

Return to “Intake”