Some new pictures of hacking up the bumper beam.
http://www.main.experiencetherave.com/s ... adiator/02
I need to do some more trimming & fitting. I was going to work on it today, but haven't been feeling overly great. I will probably work on trying to finish things next weekend.....birthday present to myself
New AWIC Work
Moderators: Helpinators, Moderators
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
Mocked up the radiator today. Fits very well! Had to get a bolts welded on to fix a previous shop's screw up.
I'm going to try and finish the hose routing tomorrow. I'm going to have to cut the lower horizontal & vertical slats in the lower bumper. Hopefully I can finish everything tomorrow or Sunday.
Here's some pics
http://www.main.experiencetherave.com/s ... adiator/03
I'm going to try and finish the hose routing tomorrow. I'm going to have to cut the lower horizontal & vertical slats in the lower bumper. Hopefully I can finish everything tomorrow or Sunday.
Here's some pics
http://www.main.experiencetherave.com/s ... adiator/03
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
Final mock up
http://www.main.experiencetherave.com/s ... adiator/04
I had to cut the lower slats on the bumper skin. I need to cut a hole in the bumper skin for the line going to the intercooler, but it should work really well. I'm very happy with how everything is going together. I think this setup will be much more effective/efficient then my previous setup, plus look better.
http://www.main.experiencetherave.com/s ... adiator/04
I had to cut the lower slats on the bumper skin. I need to cut a hole in the bumper skin for the line going to the intercooler, but it should work really well. I'm very happy with how everything is going together. I think this setup will be much more effective/efficient then my previous setup, plus look better.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
Finally finished!!!! after four months....wow!
I pulled two bone head moves. First one I hooked up the inlet & outlet backwards on the intercooler. So I swapped that around. Other issue I realized I should have done is have the shop put a vent/bleed screw on the top of the exchanger header to help bleed off air. I ran my hoses so the inlet is at the top and outlet at the bottom. Good for thermal reasons, bad for venting air from the radiator.
http://www.main.experiencetherave.com/s ... diator/06/
all the pictures here
http://www.main.experiencetherave.com/s ... icradiator
I pulled two bone head moves. First one I hooked up the inlet & outlet backwards on the intercooler. So I swapped that around. Other issue I realized I should have done is have the shop put a vent/bleed screw on the top of the exchanger header to help bleed off air. I ran my hoses so the inlet is at the top and outlet at the bottom. Good for thermal reasons, bad for venting air from the radiator.
http://www.main.experiencetherave.com/s ... diator/06/
all the pictures here
http://www.main.experiencetherave.com/s ... icradiator
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
Thanks!
This is how I originally wanted my AWIC setup to be like. The two smaller radiators really just didn't do it.
This is how I originally wanted my AWIC setup to be like. The two smaller radiators really just didn't do it.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- Fifth Gear
- Posts: 2385
- Joined: Tue Mar 13, 2007 12:56 am
- Location: 10-9-oh(!), wa
Bit of a revival:92 ra-r wrote:Ooh, I just noticed in one of your pictures that dandy Samco hose from the turbo to the IC. It has a molded BOV elbow on it. What's the number for that? I've been looking for that little bugger!
I found some info on the turbo->I/C hose here.
93 legacy wagon L, 22T swapped (TW imitator) now with five forward speeds. (Gone, but never forgotten)
johndrivesabox wrote: Rally, my kyboard is brok, his has nohing o do wih h liquor.
Originalcyn wrote:Apparently everyone hates Gabe.
-
- First Gear
- Posts: 80
- Joined: Sat Dec 30, 2006 4:03 am
- Location: New Zealand
Every time I go drive, especially when the temps are colder and go feel the AWIC core.....it's cold to the touch and stays that way....
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm