ECU Main Ground Location

Buffman · Post by **Buffman** » Wed Jan 21, 2009 11:55 pm

Anyone have a picture of the ECU main ground location? I recall someone stating it's on the intake manifold. A picture would grreatly help

Trying to figure out why I get weird CELs all the time. Have code 32 this time stored in the ECU. Don't have a CEL light on for it either.... (yes the light works)

Matt

jefferson · Post by **jefferson** » Thu Jan 22, 2009 12:49 am

I don't have a picture, but it is on the rear of the intake manifold on the drivers side behind the injector for the rear cylinder. I took the windshield washer bottle out in order to get to it alot easier. Hope that helps.

Jeff

Buffman · Post by **Buffman** » Thu Jan 22, 2009 1:56 am

thanks. I'll have to move that out of the way and see if I can find it..

Buffman · Post by **Buffman** » Thu Jan 22, 2009 7:30 am

Found it. PITA to get to. Had to use a u-joint on my socket to get it out. Ends of the wires were all corrodded, so I lopped them off and crimped on new connectors. Any other grounds for the TCU or ECU that I should check or are those the main ones?

RJ93SS · Post by **RJ93SS** » Thu Jan 22, 2009 9:14 am

one of you guys mind throwin some pics up please, thanks

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

ECU Main Ground Location

ECU Main Ground Location