Title says pretty much what's up. I can get a pretty good deal on some WRX seats. They are definitely better then my old worn legacy seats, which are meant for a wider body then mine, plus are just old. The seats don't come with the brackets, sliders and such, as he used them for his spacaros. I would assume I could just bolt them up to my brackets........but I am not really sure. I would need to rig something with the little bottom seat belt holder thing on mine, so it doesn't go all the way back.
Other thing is my interior is tan.....seats are goin to be black and gray......not the best combo........anyone have any info on re-upulstering.....or even just like a pull over type covers that look good.....I know they're out there.....just have not dealt with any.
Thanks guys
Josh
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
Urgent, need to know whether WRX seats will fit in a BC-BF l
Moderators: Helpinators, Moderators
-
milehial2000
Urgent, need to know whether WRX seats will fit in a BC-BF l
I think you will be able to make them fit we have done a lot of
conversion work and that involved installing Legacy and good
Loyale seats into just about any subie from about '83 up. You might
have to make some steel brackets if the width is not the same. We used
to take 3" flat steel and run it across the bottom and then mount the
rails to that and it worked great.
AL(CO)
--- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...> wrote:
> Title says pretty much what's up. I can get a pretty good deal on
some WRX seats. They are definitely better then my old worn legacy
seats, which are meant for a wider body then mine, plus are just old.
The seats don't come with the brackets, sliders and such, as he used
them for his spacaros. I would assume I could just bolt them up to my
brackets........but I am not really sure. I would need to rig
something with the little bottom seat belt holder thing on mine, so it
doesn't go all the way back.
>
> Other thing is my interior is tan.....seats are goin to be black and
gray......not the best combo........anyone have any info on
re-upulstering.....or even just like a pull over type covers that look
good.....I know they're out there.....just have not dealt with any.
>
> Thanks guys
>
> Josh
------------------------ ---------------------~-->
Kwick Pick opens locked car doors,
front doors, drawers, briefcases,
padlocks, and more. On sale now!
http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
conversion work and that involved installing Legacy and good
Loyale seats into just about any subie from about '83 up. You might
have to make some steel brackets if the width is not the same. We used
to take 3" flat steel and run it across the bottom and then mount the
rails to that and it worked great.
AL(CO)
--- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...> wrote:
> Title says pretty much what's up. I can get a pretty good deal on
some WRX seats. They are definitely better then my old worn legacy
seats, which are meant for a wider body then mine, plus are just old.
The seats don't come with the brackets, sliders and such, as he used
them for his spacaros. I would assume I could just bolt them up to my
brackets........but I am not really sure. I would need to rig
something with the little bottom seat belt holder thing on mine, so it
doesn't go all the way back.
>
> Other thing is my interior is tan.....seats are goin to be black and
gray......not the best combo........anyone have any info on
re-upulstering.....or even just like a pull over type covers that look
good.....I know they're out there.....just have not dealt with any.
>
> Thanks guys
>
> Josh
------------------------ ---------------------~-->
Kwick Pick opens locked car doors,
front doors, drawers, briefcases,
padlocks, and more. On sale now!
http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
georgerbyrne
Urgent, need to know whether WRX seats will fit in a BC-BF l
They will bolt straight in!
No prob's/mods at all!
You may have to bolt the rear inside bolts through the current
seatbelt plug mounts, but other than that they are the same holes!
George, Australia.
--- In BC-BFLegacyWorks@y..., "milehial2000" <acroxford@h...> wrote:
> I think you will be able to make them fit we have done a lot of
> conversion work and that involved installing Legacy and good
> Loyale seats into just about any subie from about '83 up. You might
> have to make some steel brackets if the width is not the same. We
used
> to take 3" flat steel and run it across the bottom and then mount
the
> rails to that and it worked great.
> AL(CO)
>
>
>
> --- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...> wrote:
> > Title says pretty much what's up. I can get a pretty good deal
on
> some WRX seats. They are definitely better then my old worn legacy
> seats, which are meant for a wider body then mine, plus are just
old.
> The seats don't come with the brackets, sliders and such, as he
used
> them for his spacaros. I would assume I could just bolt them up to
my
> brackets........but I am not really sure. I would need to rig
> something with the little bottom seat belt holder thing on mine, so
it
> doesn't go all the way back.
> >
> > Other thing is my interior is tan.....seats are goin to be black
and
> gray......not the best combo........anyone have any info on
> re-upulstering.....or even just like a pull over type covers that
look
> good.....I know they're out there.....just have not dealt with any.
> >
> > Thanks guys
> >
> > Josh
------------------------ ---------------------~-->
Kwick Pick opens locked car doors,
front doors, drawers, briefcases,
padlocks, and more. On sale now!
http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
No prob's/mods at all!
You may have to bolt the rear inside bolts through the current
seatbelt plug mounts, but other than that they are the same holes!
George, Australia.
--- In BC-BFLegacyWorks@y..., "milehial2000" <acroxford@h...> wrote:
> I think you will be able to make them fit we have done a lot of
> conversion work and that involved installing Legacy and good
> Loyale seats into just about any subie from about '83 up. You might
> have to make some steel brackets if the width is not the same. We
used
> to take 3" flat steel and run it across the bottom and then mount
the
> rails to that and it worked great.
> AL(CO)
>
>
>
> --- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...> wrote:
> > Title says pretty much what's up. I can get a pretty good deal
on
> some WRX seats. They are definitely better then my old worn legacy
> seats, which are meant for a wider body then mine, plus are just
old.
> The seats don't come with the brackets, sliders and such, as he
used
> them for his spacaros. I would assume I could just bolt them up to
my
> brackets........but I am not really sure. I would need to rig
> something with the little bottom seat belt holder thing on mine, so
it
> doesn't go all the way back.
> >
> > Other thing is my interior is tan.....seats are goin to be black
and
> gray......not the best combo........anyone have any info on
> re-upulstering.....or even just like a pull over type covers that
look
> good.....I know they're out there.....just have not dealt with any.
> >
> > Thanks guys
> >
> > Josh
------------------------ ---------------------~-->
Kwick Pick opens locked car doors,
front doors, drawers, briefcases,
padlocks, and more. On sale now!
http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
dealerxing
Urgent, need to know whether WRX seats will fit in a BC-BF l
I have WRX front seats in my USDM Legacy Turbo.
You have to swap the seatbelt buckles if you have the automatic
seatbelts. Legacy seat has 5 mounting holes, WRX seat only has four
on each, so one is unused. Once they are in they will be much taller
than your Legacy seats.
--- In BC-BFLegacyWorks@y..., "georgerbyrne" <georgerbyrne@y...>
wrote:
> They will bolt straight in!
> No prob's/mods at all!
>
> You may have to bolt the rear inside bolts through the current
> seatbelt plug mounts, but other than that they are the same holes!
> George, Australia.
>
> --- In BC-BFLegacyWorks@y..., "milehial2000" <acroxford@h...> wrote:
> > I think you will be able to make them fit we have done a lot
of
> > conversion work and that involved installing Legacy and good
> > Loyale seats into just about any subie from about '83 up. You
might
> > have to make some steel brackets if the width is not the same. We
> used
> > to take 3" flat steel and run it across the bottom and then mount
> the
> > rails to that and it worked great.
> > AL(CO)
> >
> >
> >
> > --- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...> wrote:
> > > Title says pretty much what's up. I can get a pretty good deal
> on
> > some WRX seats. They are definitely better then my old worn
legacy
> > seats, which are meant for a wider body then mine, plus are just
> old.
> > The seats don't come with the brackets, sliders and such, as he
> used
> > them for his spacaros. I would assume I could just bolt them up
to
> my
> > brackets........but I am not really sure. I would need to rig
> > something with the little bottom seat belt holder thing on mine,
so
> it
> > doesn't go all the way back.
> > >
> > > Other thing is my interior is tan.....seats are goin to be
black
> and
> > gray......not the best combo........anyone have any info on
> > re-upulstering.....or even just like a pull over type covers that
> look
> > good.....I know they're out there.....just have not dealt with
any.
> > >
> > > Thanks guys
> > >
> > > Josh
------------------------ ---------------------~-->
Kwick Pick opens locked car doors,
front doors, drawers, briefcases,
padlocks, and more. On sale now!
http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
You have to swap the seatbelt buckles if you have the automatic
seatbelts. Legacy seat has 5 mounting holes, WRX seat only has four
on each, so one is unused. Once they are in they will be much taller
than your Legacy seats.
--- In BC-BFLegacyWorks@y..., "georgerbyrne" <georgerbyrne@y...>
wrote:
> They will bolt straight in!
> No prob's/mods at all!
>
> You may have to bolt the rear inside bolts through the current
> seatbelt plug mounts, but other than that they are the same holes!
> George, Australia.
>
> --- In BC-BFLegacyWorks@y..., "milehial2000" <acroxford@h...> wrote:
> > I think you will be able to make them fit we have done a lot
of
> > conversion work and that involved installing Legacy and good
> > Loyale seats into just about any subie from about '83 up. You
might
> > have to make some steel brackets if the width is not the same. We
> used
> > to take 3" flat steel and run it across the bottom and then mount
> the
> > rails to that and it worked great.
> > AL(CO)
> >
> >
> >
> > --- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...> wrote:
> > > Title says pretty much what's up. I can get a pretty good deal
> on
> > some WRX seats. They are definitely better then my old worn
legacy
> > seats, which are meant for a wider body then mine, plus are just
> old.
> > The seats don't come with the brackets, sliders and such, as he
> used
> > them for his spacaros. I would assume I could just bolt them up
to
> my
> > brackets........but I am not really sure. I would need to rig
> > something with the little bottom seat belt holder thing on mine,
so
> it
> > doesn't go all the way back.
> > >
> > > Other thing is my interior is tan.....seats are goin to be
black
> and
> > gray......not the best combo........anyone have any info on
> > re-upulstering.....or even just like a pull over type covers that
> look
> > good.....I know they're out there.....just have not dealt with
any.
> > >
> > > Thanks guys
> > >
> > > Josh
------------------------ ---------------------~-->
Kwick Pick opens locked car doors,
front doors, drawers, briefcases,
padlocks, and more. On sale now!
http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
Josh Colombo
Urgent, need to know whether WRX seats will fit in a BC-BF l
Thanks for the info.
I need to take some measures and such when I get back in town. He used the rails, so I would have to use the Legacy rails. I need to look more closely at things.
Josh
-----Original Message-----
From: dealerxing [mailto:saitam@newyork.com]
Sent: Tue 6/4/2002 9:23 AM
To: BC-BFLegacyWorks@yahoogroups.com
Cc:
Subject: [BC-BFLegacyWorks] Re: Urgent, need to know whether WRX seats will fit in a BC-BF legacy
I have WRX front seats in my USDM Legacy Turbo.
You have to swap the seatbelt buckles if you have the automatic
seatbelts. Legacy seat has 5 mounting holes, WRX seat only has four
on each, so one is unused. Once they are in they will be much taller
than your Legacy seats.
--- In BC-BFLegacyWorks@y..., "georgerbyrne" <georgerbyrne@y...>
wrote:
> They will bolt straight in!
> No prob's/mods at all!
>
> You may have to bolt the rear inside bolts through the current
> seatbelt plug mounts, but other than that they are the same holes!
> George, Australia.
>
> --- In BC-BFLegacyWorks@y..., "milehial2000" <acroxford@h...> wrote:
> > I think you will be able to make them fit we have done a lot
of
> > conversion work and that involved installing Legacy and good
> > Loyale seats into just about any subie from about '83 up. You
might
> > have to make some steel brackets if the width is not the same. We
> used
> > to take 3" flat steel and run it across the bottom and then mount
> the
> > rails to that and it worked great.
> > AL(CO)
> >
> >
> >
> > --- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...> wrote:
> > > Title says pretty much what's up. I can get a pretty good deal
> on
> > some WRX seats. They are definitely better then my old worn
legacy
> > seats, which are meant for a wider body then mine, plus are just
> old.
> > The seats don't come with the brackets, sliders and such, as he
> used
> > them for his spacaros. I would assume I could just bolt them up
to
> my
> > brackets........but I am not really sure. I would need to rig
> > something with the little bottom seat belt holder thing on mine,
so
> it
> > doesn't go all the way back.
> > >
> > > Other thing is my interior is tan.....seats are goin to be
black
> and
> > gray......not the best combo........anyone have any info on
> > re-upulstering.....or even just like a pull over type covers that
> look
> > good.....I know they're out there.....just have not dealt with
any.
> > >
> > > Thanks guys
> > >
> > > Josh
------------------------ ---------------------~-->
Kwick Pick opens locked car doors,
front doors, drawers, briefcases,
padlocks, and more. On sale now!
http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
I need to take some measures and such when I get back in town. He used the rails, so I would have to use the Legacy rails. I need to look more closely at things.
Josh
-----Original Message-----
From: dealerxing [mailto:saitam@newyork.com]
Sent: Tue 6/4/2002 9:23 AM
To: BC-BFLegacyWorks@yahoogroups.com
Cc:
Subject: [BC-BFLegacyWorks] Re: Urgent, need to know whether WRX seats will fit in a BC-BF legacy
I have WRX front seats in my USDM Legacy Turbo.
You have to swap the seatbelt buckles if you have the automatic
seatbelts. Legacy seat has 5 mounting holes, WRX seat only has four
on each, so one is unused. Once they are in they will be much taller
than your Legacy seats.
--- In BC-BFLegacyWorks@y..., "georgerbyrne" <georgerbyrne@y...>
wrote:
> They will bolt straight in!
> No prob's/mods at all!
>
> You may have to bolt the rear inside bolts through the current
> seatbelt plug mounts, but other than that they are the same holes!
> George, Australia.
>
> --- In BC-BFLegacyWorks@y..., "milehial2000" <acroxford@h...> wrote:
> > I think you will be able to make them fit we have done a lot
of
> > conversion work and that involved installing Legacy and good
> > Loyale seats into just about any subie from about '83 up. You
might
> > have to make some steel brackets if the width is not the same. We
> used
> > to take 3" flat steel and run it across the bottom and then mount
> the
> > rails to that and it worked great.
> > AL(CO)
> >
> >
> >
> > --- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...> wrote:
> > > Title says pretty much what's up. I can get a pretty good deal
> on
> > some WRX seats. They are definitely better then my old worn
legacy
> > seats, which are meant for a wider body then mine, plus are just
> old.
> > The seats don't come with the brackets, sliders and such, as he
> used
> > them for his spacaros. I would assume I could just bolt them up
to
> my
> > brackets........but I am not really sure. I would need to rig
> > something with the little bottom seat belt holder thing on mine,
so
> it
> > doesn't go all the way back.
> > >
> > > Other thing is my interior is tan.....seats are goin to be
black
> and
> > gray......not the best combo........anyone have any info on
> > re-upulstering.....or even just like a pull over type covers that
> look
> > good.....I know they're out there.....just have not dealt with
any.
> > >
> > > Thanks guys
> > >
> > > Josh
------------------------ ---------------------~-->
Kwick Pick opens locked car doors,
front doors, drawers, briefcases,
padlocks, and more. On sale now!
http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
dealerxing
Urgent, need to know whether WRX seats will fit in a BC-BF l
How much are you getting them for? I got them for $300/pair. One of
the seats has some rips on the back though, not very noticeable.
They were taken out since day 1 but one of them was damaged before
delivery.
--- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...> wrote:
> Thanks for the info.
>
> I need to take some measures and such when I get back in town. He
used the rails, so I would have to use the Legacy rails. I need to
look more closely at things.
>
> Josh
>
> -----Original Message-----
> From: dealerxing [mailto:saitam@n...]
> Sent: Tue 6/4/2002 9:23 AM
> To: BC-BFLegacyWorks@y...
> Cc:
> Subject: [BC-BFLegacyWorks] Re: Urgent, need to know whether
WRX seats will fit in a BC-BF legacy
>
>
>
> I have WRX front seats in my USDM Legacy Turbo.
>
> You have to swap the seatbelt buckles if you have the
automatic
> seatbelts. Legacy seat has 5 mounting holes, WRX seat only
has four
> on each, so one is unused. Once they are in they will be
much taller
> than your Legacy seats.
>
> --- In BC-BFLegacyWorks@y..., "georgerbyrne"
<georgerbyrne@y...>
> wrote:
> > They will bolt straight in!
> > No prob's/mods at all!
> >
> > You may have to bolt the rear inside bolts through the
current
> > seatbelt plug mounts, but other than that they are the same
holes!
> > George, Australia.
> >
> > --- In BC-BFLegacyWorks@y..., "milehial2000"
<acroxford@h...> wrote:
> > > I think you will be able to make them fit we have done
a lot
> of
> > > conversion work and that involved installing Legacy and
good
> > > Loyale seats into just about any subie from about '83 up.
You
> might
> > > have to make some steel brackets if the width is not the
same. We
> > used
> > > to take 3" flat steel and run it across the bottom and
then mount
> > the
> > > rails to that and it worked great.
> > > AL(CO)
> > >
> > >
> > >
> > > --- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...>
wrote:
> > > > Title says pretty much what's up. I can get a pretty
good deal
> > on
> > > some WRX seats. They are definitely better then my old
worn
> legacy
> > > seats, which are meant for a wider body then mine, plus
are just
> > old.
> > > The seats don't come with the brackets, sliders and such,
as he
> > used
> > > them for his spacaros. I would assume I could just bolt
them up
> to
> > my
> > > brackets........but I am not really sure. I would need
to rig
> > > something with the little bottom seat belt holder thing
on mine,
> so
> > it
> > > doesn't go all the way back.
> > > >
> > > > Other thing is my interior is tan.....seats are goin to
be
> black
> > and
> > > gray......not the best combo........anyone have any info
on
> > > re-upulstering.....or even just like a pull over type
covers that
> > look
> > > good.....I know they're out there.....just have not dealt
with
> any.
> > > >
> > > > Thanks guys
> > > >
> > > > Josh
>
>
> ------------------------ ---------------
------~-->
> Kwick Pick opens locked car doors,
> front doors, drawers, briefcases,
> padlocks, and more. On sale now!
> http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
> --------------------------------------------------------------
-------~->
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
------------------------ ---------------------~-->
Kwick Pick opens locked car doors,
front doors, drawers, briefcases,
padlocks, and more. On sale now!
http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
the seats has some rips on the back though, not very noticeable.
They were taken out since day 1 but one of them was damaged before
delivery.
--- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...> wrote:
> Thanks for the info.
>
> I need to take some measures and such when I get back in town. He
used the rails, so I would have to use the Legacy rails. I need to
look more closely at things.
>
> Josh
>
> -----Original Message-----
> From: dealerxing [mailto:saitam@n...]
> Sent: Tue 6/4/2002 9:23 AM
> To: BC-BFLegacyWorks@y...
> Cc:
> Subject: [BC-BFLegacyWorks] Re: Urgent, need to know whether
WRX seats will fit in a BC-BF legacy
>
>
>
> I have WRX front seats in my USDM Legacy Turbo.
>
> You have to swap the seatbelt buckles if you have the
automatic
> seatbelts. Legacy seat has 5 mounting holes, WRX seat only
has four
> on each, so one is unused. Once they are in they will be
much taller
> than your Legacy seats.
>
> --- In BC-BFLegacyWorks@y..., "georgerbyrne"
<georgerbyrne@y...>
> wrote:
> > They will bolt straight in!
> > No prob's/mods at all!
> >
> > You may have to bolt the rear inside bolts through the
current
> > seatbelt plug mounts, but other than that they are the same
holes!
> > George, Australia.
> >
> > --- In BC-BFLegacyWorks@y..., "milehial2000"
<acroxford@h...> wrote:
> > > I think you will be able to make them fit we have done
a lot
> of
> > > conversion work and that involved installing Legacy and
good
> > > Loyale seats into just about any subie from about '83 up.
You
> might
> > > have to make some steel brackets if the width is not the
same. We
> > used
> > > to take 3" flat steel and run it across the bottom and
then mount
> > the
> > > rails to that and it worked great.
> > > AL(CO)
> > >
> > >
> > >
> > > --- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...>
wrote:
> > > > Title says pretty much what's up. I can get a pretty
good deal
> > on
> > > some WRX seats. They are definitely better then my old
worn
> legacy
> > > seats, which are meant for a wider body then mine, plus
are just
> > old.
> > > The seats don't come with the brackets, sliders and such,
as he
> > used
> > > them for his spacaros. I would assume I could just bolt
them up
> to
> > my
> > > brackets........but I am not really sure. I would need
to rig
> > > something with the little bottom seat belt holder thing
on mine,
> so
> > it
> > > doesn't go all the way back.
> > > >
> > > > Other thing is my interior is tan.....seats are goin to
be
> black
> > and
> > > gray......not the best combo........anyone have any info
on
> > > re-upulstering.....or even just like a pull over type
covers that
> > look
> > > good.....I know they're out there.....just have not dealt
with
> any.
> > > >
> > > > Thanks guys
> > > >
> > > > Josh
>
>
> ------------------------ ---------------
------~-->
> Kwick Pick opens locked car doors,
> front doors, drawers, briefcases,
> padlocks, and more. On sale now!
> http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
> --------------------------------------------------------------
-------~->
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
------------------------ ---------------------~-->
Kwick Pick opens locked car doors,
front doors, drawers, briefcases,
padlocks, and more. On sale now!
http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
Josh Colombo
Urgent, need to know whether WRX seats will fit in a BC-BF l
He want's $250 for them. Which is a really good price. I need to double check on measurements and such to make sure everything works, and they won't look too shitty.
I'd have to drive up to dallas area to get them....but no biggy. How do they look in the car? I was debating on gettin them re-ulpolstered.
josh
-----Original Message-----
From: dealerxing [mailto:saitam@newyork.com]
Sent: Tue 6/4/2002 7:55 PM
To: BC-BFLegacyWorks@yahoogroups.com
Cc:
Subject: [BC-BFLegacyWorks] Re: Urgent, need to know whether WRX seats will fit in a BC-BF legacy
How much are you getting them for? I got them for $300/pair. One of
the seats has some rips on the back though, not very noticeable.
They were taken out since day 1 but one of them was damaged before
delivery.
--- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...> wrote:
> Thanks for the info.
>
> I need to take some measures and such when I get back in town. He
used the rails, so I would have to use the Legacy rails. I need to
look more closely at things.
>
> Josh
>
> -----Original Message-----
> From: dealerxing [mailto:saitam@n...]
> Sent: Tue 6/4/2002 9:23 AM
> To: BC-BFLegacyWorks@y...
> Cc:
> Subject: [BC-BFLegacyWorks] Re: Urgent, need to know whether
WRX seats will fit in a BC-BF legacy
>
>
>
> I have WRX front seats in my USDM Legacy Turbo.
>
> You have to swap the seatbelt buckles if you have the
automatic
> seatbelts. Legacy seat has 5 mounting holes, WRX seat only
has four
> on each, so one is unused. Once they are in they will be
much taller
> than your Legacy seats.
>
> --- In BC-BFLegacyWorks@y..., "georgerbyrne"
<georgerbyrne@y...>
> wrote:
> > They will bolt straight in!
> > No prob's/mods at all!
> >
> > You may have to bolt the rear inside bolts through the
current
> > seatbelt plug mounts, but other than that they are the same
holes!
> > George, Australia.
> >
> > --- In BC-BFLegacyWorks@y..., "milehial2000"
<acroxford@h...> wrote:
> > > I think you will be able to make them fit we have done
a lot
> of
> > > conversion work and that involved installing Legacy and
good
> > > Loyale seats into just about any subie from about '83 up.
You
> might
> > > have to make some steel brackets if the width is not the
same. We
> > used
> > > to take 3" flat steel and run it across the bottom and
then mount
> > the
> > > rails to that and it worked great.
> > > AL(CO)
> > >
> > >
> > >
> > > --- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...>
wrote:
> > > > Title says pretty much what's up. I can get a pretty
good deal
> > on
> > > some WRX seats. They are definitely better then my old
worn
> legacy
> > > seats, which are meant for a wider body then mine, plus
are just
> > old.
> > > The seats don't come with the brackets, sliders and such,
as he
> > used
> > > them for his spacaros. I would assume I could just bolt
them up
> to
> > my
> > > brackets........but I am not really sure. I would need
to rig
> > > something with the little bottom seat belt holder thing
on mine,
> so
> > it
> > > doesn't go all the way back.
> > > >
> > > > Other thing is my interior is tan.....seats are goin to
be
> black
> > and
> > > gray......not the best combo........anyone have any info
on
> > > re-upulstering.....or even just like a pull over type
covers that
> > look
> > > good.....I know they're out there.....just have not dealt
with
> any.
> > > >
> > > > Thanks guys
> > > >
> > > > Josh
>
>
> ------------------------ ---------------
------~-->
> Kwick Pick opens locked car doors,
> front doors, drawers, briefcases,
> padlocks, and more. On sale now!
> http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
> --------------------------------------------------------------
-------~->
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
------------------------ ---------------------~-->
Kwick Pick opens locked car doors,
front doors, drawers, briefcases,
padlocks, and more. On sale now!
http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
I'd have to drive up to dallas area to get them....but no biggy. How do they look in the car? I was debating on gettin them re-ulpolstered.
josh
-----Original Message-----
From: dealerxing [mailto:saitam@newyork.com]
Sent: Tue 6/4/2002 7:55 PM
To: BC-BFLegacyWorks@yahoogroups.com
Cc:
Subject: [BC-BFLegacyWorks] Re: Urgent, need to know whether WRX seats will fit in a BC-BF legacy
How much are you getting them for? I got them for $300/pair. One of
the seats has some rips on the back though, not very noticeable.
They were taken out since day 1 but one of them was damaged before
delivery.
--- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...> wrote:
> Thanks for the info.
>
> I need to take some measures and such when I get back in town. He
used the rails, so I would have to use the Legacy rails. I need to
look more closely at things.
>
> Josh
>
> -----Original Message-----
> From: dealerxing [mailto:saitam@n...]
> Sent: Tue 6/4/2002 9:23 AM
> To: BC-BFLegacyWorks@y...
> Cc:
> Subject: [BC-BFLegacyWorks] Re: Urgent, need to know whether
WRX seats will fit in a BC-BF legacy
>
>
>
> I have WRX front seats in my USDM Legacy Turbo.
>
> You have to swap the seatbelt buckles if you have the
automatic
> seatbelts. Legacy seat has 5 mounting holes, WRX seat only
has four
> on each, so one is unused. Once they are in they will be
much taller
> than your Legacy seats.
>
> --- In BC-BFLegacyWorks@y..., "georgerbyrne"
<georgerbyrne@y...>
> wrote:
> > They will bolt straight in!
> > No prob's/mods at all!
> >
> > You may have to bolt the rear inside bolts through the
current
> > seatbelt plug mounts, but other than that they are the same
holes!
> > George, Australia.
> >
> > --- In BC-BFLegacyWorks@y..., "milehial2000"
<acroxford@h...> wrote:
> > > I think you will be able to make them fit we have done
a lot
> of
> > > conversion work and that involved installing Legacy and
good
> > > Loyale seats into just about any subie from about '83 up.
You
> might
> > > have to make some steel brackets if the width is not the
same. We
> > used
> > > to take 3" flat steel and run it across the bottom and
then mount
> > the
> > > rails to that and it worked great.
> > > AL(CO)
> > >
> > >
> > >
> > > --- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...>
wrote:
> > > > Title says pretty much what's up. I can get a pretty
good deal
> > on
> > > some WRX seats. They are definitely better then my old
worn
> legacy
> > > seats, which are meant for a wider body then mine, plus
are just
> > old.
> > > The seats don't come with the brackets, sliders and such,
as he
> > used
> > > them for his spacaros. I would assume I could just bolt
them up
> to
> > my
> > > brackets........but I am not really sure. I would need
to rig
> > > something with the little bottom seat belt holder thing
on mine,
> so
> > it
> > > doesn't go all the way back.
> > > >
> > > > Other thing is my interior is tan.....seats are goin to
be
> black
> > and
> > > gray......not the best combo........anyone have any info
on
> > > re-upulstering.....or even just like a pull over type
covers that
> > look
> > > good.....I know they're out there.....just have not dealt
with
> any.
> > > >
> > > > Thanks guys
> > > >
> > > > Josh
>
>
> ------------------------ ---------------
------~-->
> Kwick Pick opens locked car doors,
> front doors, drawers, briefcases,
> padlocks, and more. On sale now!
> http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
> --------------------------------------------------------------
-------~->
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
------------------------ ---------------------~-->
Kwick Pick opens locked car doors,
front doors, drawers, briefcases,
padlocks, and more. On sale now!
http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
georgerbyrne
Urgent, need to know whether WRX seats will fit in a BC-BF l
Gees, they're cheap over there!!!!
The going rate over here is about $600-$800 for a pair of front WRX
seats
And yet we have soooo many more WRX's!
George.
--- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...> wrote:
> He want's $250 for them. Which is a really good price. I need to
double check on measurements and such to make sure everything works,
and they won't look too shitty.
>
> I'd have to drive up to dallas area to get them....but no biggy.
How do they look in the car? I was debating on gettin them re-
ulpolstered.
>
> josh
>
> -----Original Message-----
> From: dealerxing [mailto:saitam@n...]
> Sent: Tue 6/4/2002 7:55 PM
> To: BC-BFLegacyWorks@y...
> Cc:
> Subject: [BC-BFLegacyWorks] Re: Urgent, need to know whether
WRX seats will fit in a BC-BF legacy
>
>
>
> How much are you getting them for? I got them for
$300/pair. One of
> the seats has some rips on the back though, not very
noticeable.
> They were taken out since day 1 but one of them was damaged
before
> delivery.
>
> --- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...>
wrote:
> > Thanks for the info.
> >
> > I need to take some measures and such when I get back in
town. He
> used the rails, so I would have to use the Legacy rails. I
need to
> look more closely at things.
> >
> > Josh
> >
> > -----Original Message-----
> > From: dealerxing [mailto:saitam@n...]
> > Sent: Tue 6/4/2002 9:23 AM
> > To: BC-BFLegacyWorks@y...
> > Cc:
> > Subject: [BC-BFLegacyWorks] Re: Urgent, need to know
whether
> WRX seats will fit in a BC-BF legacy
> >
> >
> >
> > I have WRX front seats in my USDM Legacy Turbo.
> >
> > You have to swap the seatbelt buckles if you have the
> automatic
> > seatbelts. Legacy seat has 5 mounting holes, WRX
seat only
> has four
> > on each, so one is unused. Once they are in they
will be
> much taller
> > than your Legacy seats.
> >
> > --- In BC-BFLegacyWorks@y..., "georgerbyrne"
> <georgerbyrne@y...>
> > wrote:
> > > They will bolt straight in!
> > > No prob's/mods at all!
> > >
> > > You may have to bolt the rear inside bolts through
the
> current
> > > seatbelt plug mounts, but other than that they are
the same
> holes!
> > > George, Australia.
> > >
> > > --- In BC-BFLegacyWorks@y..., "milehial2000"
> <acroxford@h...> wrote:
> > > > I think you will be able to make them fit we
have done
> a lot
> > of
> > > > conversion work and that involved installing
Legacy and
> good
> > > > Loyale seats into just about any subie from
about '83 up.
> You
> > might
> > > > have to make some steel brackets if the width is
not the
> same. We
> > > used
> > > > to take 3" flat steel and run it across the
bottom and
> then mount
> > > the
> > > > rails to that and it worked great.
> > > > AL(CO)
> > > >
> > > >
> > > >
> > > > --- In BC-BFLegacyWorks@y..., "Josh Colombo"
<josh@s...>
> wrote:
> > > > > Title says pretty much what's up. I can get a
pretty
> good deal
> > > on
> > > > some WRX seats. They are definitely better then
my old
> worn
> > legacy
> > > > seats, which are meant for a wider body then
mine, plus
> are just
> > > old.
> > > > The seats don't come with the brackets, sliders
and such,
> as he
> > > used
> > > > them for his spacaros. I would assume I could
just bolt
> them up
> > to
> > > my
> > > > brackets........but I am not really sure. I
would need
> to rig
> > > > something with the little bottom seat belt holder
thing
> on mine,
> > so
> > > it
> > > > doesn't go all the way back.
> > > > >
> > > > > Other thing is my interior is tan.....seats are
goin to
> be
> > black
> > > and
> > > > gray......not the best combo........anyone have
any info
> on
> > > > re-upulstering.....or even just like a pull over
type
> covers that
> > > look
> > > > good.....I know they're out there.....just have
not dealt
> with
> > any.
> > > > >
> > > > > Thanks guys
> > > > >
> > > > > Josh
> >
> >
> > ------------------------ -------
--------
> ------~-->
> > Kwick Pick opens locked car doors,
> > front doors, drawers, briefcases,
> > padlocks, and more. On sale now!
> >
http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
> > ------------------------------------------------------
--------
> -------~->
> >
> > To unsubscribe from this group, please send an email
to:
> > BC-BFLegacyWorks-unsubscribe@e...
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
> ------------------------ ---------------
------~-->
> Kwick Pick opens locked car doors,
> front doors, drawers, briefcases,
> padlocks, and more. On sale now!
> http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
> --------------------------------------------------------------
-------~->
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
The going rate over here is about $600-$800 for a pair of front WRX
seats
And yet we have soooo many more WRX's!George.
--- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...> wrote:
> He want's $250 for them. Which is a really good price. I need to
double check on measurements and such to make sure everything works,
and they won't look too shitty.
>
> I'd have to drive up to dallas area to get them....but no biggy.
How do they look in the car? I was debating on gettin them re-
ulpolstered.
>
> josh
>
> -----Original Message-----
> From: dealerxing [mailto:saitam@n...]
> Sent: Tue 6/4/2002 7:55 PM
> To: BC-BFLegacyWorks@y...
> Cc:
> Subject: [BC-BFLegacyWorks] Re: Urgent, need to know whether
WRX seats will fit in a BC-BF legacy
>
>
>
> How much are you getting them for? I got them for
$300/pair. One of
> the seats has some rips on the back though, not very
noticeable.
> They were taken out since day 1 but one of them was damaged
before
> delivery.
>
> --- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...>
wrote:
> > Thanks for the info.
> >
> > I need to take some measures and such when I get back in
town. He
> used the rails, so I would have to use the Legacy rails. I
need to
> look more closely at things.
> >
> > Josh
> >
> > -----Original Message-----
> > From: dealerxing [mailto:saitam@n...]
> > Sent: Tue 6/4/2002 9:23 AM
> > To: BC-BFLegacyWorks@y...
> > Cc:
> > Subject: [BC-BFLegacyWorks] Re: Urgent, need to know
whether
> WRX seats will fit in a BC-BF legacy
> >
> >
> >
> > I have WRX front seats in my USDM Legacy Turbo.
> >
> > You have to swap the seatbelt buckles if you have the
> automatic
> > seatbelts. Legacy seat has 5 mounting holes, WRX
seat only
> has four
> > on each, so one is unused. Once they are in they
will be
> much taller
> > than your Legacy seats.
> >
> > --- In BC-BFLegacyWorks@y..., "georgerbyrne"
> <georgerbyrne@y...>
> > wrote:
> > > They will bolt straight in!
> > > No prob's/mods at all!
> > >
> > > You may have to bolt the rear inside bolts through
the
> current
> > > seatbelt plug mounts, but other than that they are
the same
> holes!
> > > George, Australia.
> > >
> > > --- In BC-BFLegacyWorks@y..., "milehial2000"
> <acroxford@h...> wrote:
> > > > I think you will be able to make them fit we
have done
> a lot
> > of
> > > > conversion work and that involved installing
Legacy and
> good
> > > > Loyale seats into just about any subie from
about '83 up.
> You
> > might
> > > > have to make some steel brackets if the width is
not the
> same. We
> > > used
> > > > to take 3" flat steel and run it across the
bottom and
> then mount
> > > the
> > > > rails to that and it worked great.
> > > > AL(CO)
> > > >
> > > >
> > > >
> > > > --- In BC-BFLegacyWorks@y..., "Josh Colombo"
<josh@s...>
> wrote:
> > > > > Title says pretty much what's up. I can get a
pretty
> good deal
> > > on
> > > > some WRX seats. They are definitely better then
my old
> worn
> > legacy
> > > > seats, which are meant for a wider body then
mine, plus
> are just
> > > old.
> > > > The seats don't come with the brackets, sliders
and such,
> as he
> > > used
> > > > them for his spacaros. I would assume I could
just bolt
> them up
> > to
> > > my
> > > > brackets........but I am not really sure. I
would need
> to rig
> > > > something with the little bottom seat belt holder
thing
> on mine,
> > so
> > > it
> > > > doesn't go all the way back.
> > > > >
> > > > > Other thing is my interior is tan.....seats are
goin to
> be
> > black
> > > and
> > > > gray......not the best combo........anyone have
any info
> on
> > > > re-upulstering.....or even just like a pull over
type
> covers that
> > > look
> > > > good.....I know they're out there.....just have
not dealt
> with
> > any.
> > > > >
> > > > > Thanks guys
> > > > >
> > > > > Josh
> >
> >
> > ------------------------ -------
--------
> ------~-->
> > Kwick Pick opens locked car doors,
> > front doors, drawers, briefcases,
> > padlocks, and more. On sale now!
> >
http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
> > ------------------------------------------------------
--------
> -------~->
> >
> > To unsubscribe from this group, please send an email
to:
> > BC-BFLegacyWorks-unsubscribe@e...
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
> ------------------------ ---------------
------~-->
> Kwick Pick opens locked car doors,
> front doors, drawers, briefcases,
> padlocks, and more. On sale now!
> http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
> --------------------------------------------------------------
-------~->
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
Kam
Urgent, need to know whether WRX seats will fit in a BC-BF l
All I can say is dfullerton has prodrive seats in his BF5 wagon and they are super. Look very good since he has dark grey leather interior.
----- Original Message -----
From: Josh <mailto:josh@surrealmirage.com> Colombo
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Wednesday, June 05, 2002 2:10 AM
Subject: RE: [BC-BFLegacyWorks] Re: Urgent, need to know whether WRX seats will fit in a BC-BF legacy
He want's $250 for them. Which is a really good price. I need to double check on measurements and such to make sure everything works, and they won't look too shitty.
I'd have to drive up to dallas area to get them....but no biggy. How do they look in the car? I was debating on gettin them re-ulpolstered.
josh
-----Original Message-----
From: dealerxing [mailto:saitam@newyork.com]
Sent: Tue 6/4/2002 7:55 PM
To: BC-BFLegacyWorks@yahoogroups.com
Cc:
Subject: [BC-BFLegacyWorks] Re: Urgent, need to know whether WRX seats will fit in a BC-BF legacy
How much are you getting them for? I got them for $300/pair. One of
the seats has some rips on the back though, not very noticeable.
They were taken out since day 1 but one of them was damaged before
delivery.
--- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...> wrote:
> Thanks for the info.
>
> I need to take some measures and such when I get back in town. He
used the rails, so I would have to use the Legacy rails. I need to
look more closely at things.
>
> Josh
>
> -----Original Message-----
> From: dealerxing [mailto:saitam@n...]
> Sent: Tue 6/4/2002 9:23 AM
> To: BC-BFLegacyWorks@y...
> Cc:
> Subject: [BC-BFLegacyWorks] Re: Urgent, need to know whether
WRX seats will fit in a BC-BF legacy
>
>
>
> I have WRX front seats in my USDM Legacy Turbo.
>
> You have to swap the seatbelt buckles if you have the
automatic
> seatbelts. Legacy seat has 5 mounting holes, WRX seat only
has four
> on each, so one is unused. Once they are in they will be
much taller
> than your Legacy seats.
>
> --- In BC-BFLegacyWorks@y..., "georgerbyrne"
<georgerbyrne@y...>
> wrote:
> > They will bolt straight in!
> > No prob's/mods at all!
> >
> > You may have to bolt the rear inside bolts through the
current
> > seatbelt plug mounts, but other than that they are the same
holes!
> > George, Australia.
> >
> > --- In BC-BFLegacyWorks@y..., "milehial2000"
<acroxford@h...> wrote:
> > > I think you will be able to make them fit we have done
a lot
> of
> > > conversion work and that involved installing Legacy and
good
> > > Loyale seats into just about any subie from about '83 up.
You
> might
> > > have to make some steel brackets if the width is not the
same. We
> > used
> > > to take 3" flat steel and run it across the bottom and
then mount
> > the
> > > rails to that and it worked great.
> > > AL(CO)
> > >
> > >
> > >
> > > --- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...>
wrote:
> > > > Title says pretty much what's up. I can get a pretty
good deal
> > on
> > > some WRX seats. They are definitely better then my old
worn
> legacy
> > > seats, which are meant for a wider body then mine, plus
are just
> > old.
> > > The seats don't come with the brackets, sliders and such,
as he
> > used
> > > them for his spacaros. I would assume I could just bolt
them up
> to
> > my
> > > brackets........but I am not really sure. I would need
to rig
> > > something with the little bottom seat belt holder thing
on mine,
> so
> > it
> > > doesn't go all the way back.
> > > >
> > > > Other thing is my interior is tan.....seats are goin to
be
> black
> > and
> > > gray......not the best combo........anyone have any info
on
> > > re-upulstering.....or even just like a pull over type
covers that
> > look
> > > good.....I know they're out there.....just have not dealt
with
> any.
> > > >
> > > > Thanks guys
> > > >
> > > > Josh
>
>
> ------------------------ ---------------
------~-->
> Kwick Pick opens locked car doors,
> front doors, drawers, briefcases,
> padlocks, and more. On sale now!
> http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
> --------------------------------------------------------------
-------~->
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
------------------------ ---------------------~-->
Kwick Pick opens locked car doors,
front doors, drawers, briefcases,
padlocks, and more. On sale now!
http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
----- Original Message -----
From: Josh <mailto:josh@surrealmirage.com> Colombo
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Wednesday, June 05, 2002 2:10 AM
Subject: RE: [BC-BFLegacyWorks] Re: Urgent, need to know whether WRX seats will fit in a BC-BF legacy
He want's $250 for them. Which is a really good price. I need to double check on measurements and such to make sure everything works, and they won't look too shitty.
I'd have to drive up to dallas area to get them....but no biggy. How do they look in the car? I was debating on gettin them re-ulpolstered.
josh
-----Original Message-----
From: dealerxing [mailto:saitam@newyork.com]
Sent: Tue 6/4/2002 7:55 PM
To: BC-BFLegacyWorks@yahoogroups.com
Cc:
Subject: [BC-BFLegacyWorks] Re: Urgent, need to know whether WRX seats will fit in a BC-BF legacy
How much are you getting them for? I got them for $300/pair. One of
the seats has some rips on the back though, not very noticeable.
They were taken out since day 1 but one of them was damaged before
delivery.
--- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...> wrote:
> Thanks for the info.
>
> I need to take some measures and such when I get back in town. He
used the rails, so I would have to use the Legacy rails. I need to
look more closely at things.
>
> Josh
>
> -----Original Message-----
> From: dealerxing [mailto:saitam@n...]
> Sent: Tue 6/4/2002 9:23 AM
> To: BC-BFLegacyWorks@y...
> Cc:
> Subject: [BC-BFLegacyWorks] Re: Urgent, need to know whether
WRX seats will fit in a BC-BF legacy
>
>
>
> I have WRX front seats in my USDM Legacy Turbo.
>
> You have to swap the seatbelt buckles if you have the
automatic
> seatbelts. Legacy seat has 5 mounting holes, WRX seat only
has four
> on each, so one is unused. Once they are in they will be
much taller
> than your Legacy seats.
>
> --- In BC-BFLegacyWorks@y..., "georgerbyrne"
<georgerbyrne@y...>
> wrote:
> > They will bolt straight in!
> > No prob's/mods at all!
> >
> > You may have to bolt the rear inside bolts through the
current
> > seatbelt plug mounts, but other than that they are the same
holes!
> > George, Australia.
> >
> > --- In BC-BFLegacyWorks@y..., "milehial2000"
<acroxford@h...> wrote:
> > > I think you will be able to make them fit we have done
a lot
> of
> > > conversion work and that involved installing Legacy and
good
> > > Loyale seats into just about any subie from about '83 up.
You
> might
> > > have to make some steel brackets if the width is not the
same. We
> > used
> > > to take 3" flat steel and run it across the bottom and
then mount
> > the
> > > rails to that and it worked great.
> > > AL(CO)
> > >
> > >
> > >
> > > --- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...>
wrote:
> > > > Title says pretty much what's up. I can get a pretty
good deal
> > on
> > > some WRX seats. They are definitely better then my old
worn
> legacy
> > > seats, which are meant for a wider body then mine, plus
are just
> > old.
> > > The seats don't come with the brackets, sliders and such,
as he
> > used
> > > them for his spacaros. I would assume I could just bolt
them up
> to
> > my
> > > brackets........but I am not really sure. I would need
to rig
> > > something with the little bottom seat belt holder thing
on mine,
> so
> > it
> > > doesn't go all the way back.
> > > >
> > > > Other thing is my interior is tan.....seats are goin to
be
> black
> > and
> > > gray......not the best combo........anyone have any info
on
> > > re-upulstering.....or even just like a pull over type
covers that
> > look
> > > good.....I know they're out there.....just have not dealt
with
> any.
> > > >
> > > > Thanks guys
> > > >
> > > > Josh
>
>
> ------------------------ ---------------
------~-->
> Kwick Pick opens locked car doors,
> front doors, drawers, briefcases,
> padlocks, and more. On sale now!
> http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
> --------------------------------------------------------------
-------~->
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
------------------------ ---------------------~-->
Kwick Pick opens locked car doors,
front doors, drawers, briefcases,
padlocks, and more. On sale now!
http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
-
Josh Colombo
Urgent, need to know whether WRX seats will fit in a BC-BF l
well......I'm getting a good deal on them. They normally run more. Not sure what goin price is. But if they fit and such, I definitely need some better seats. The standard legacy seats are not for performance.
Josh
-----Original Message-----
From: georgerbyrne [mailto:georgerbyrne@yahoo.com]
Sent: Wed 6/5/2002 3:29 AM
To: BC-BFLegacyWorks@yahoogroups.com
Cc:
Subject: [BC-BFLegacyWorks] Re: Urgent, need to know whether WRX seats will fit in a BC-BF legacy
Gees, they're cheap over there!!!!
The going rate over here is about $600-$800 for a pair of front WRX
seats And yet we have soooo many more WRX's!
George.
--- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...> wrote:
> He want's $250 for them. Which is a really good price. I need to
double check on measurements and such to make sure everything works,
and they won't look too shitty.
>
> I'd have to drive up to dallas area to get them....but no biggy.
How do they look in the car? I was debating on gettin them re-
ulpolstered.
>
> josh
>
> -----Original Message-----
> From: dealerxing [mailto:saitam@n...]
> Sent: Tue 6/4/2002 7:55 PM
> To: BC-BFLegacyWorks@y...
> Cc:
> Subject: [BC-BFLegacyWorks] Re: Urgent, need to know whether
WRX seats will fit in a BC-BF legacy
>
>
>
> How much are you getting them for? I got them for
$300/pair. One of
> the seats has some rips on the back though, not very
noticeable.
> They were taken out since day 1 but one of them was damaged
before
> delivery.
>
> --- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...>
wrote:
> > Thanks for the info.
> >
> > I need to take some measures and such when I get back in
town. He
> used the rails, so I would have to use the Legacy rails. I
need to
> look more closely at things.
> >
> > Josh
> >
> > -----Original Message-----
> > From: dealerxing [mailto:saitam@n...]
> > Sent: Tue 6/4/2002 9:23 AM
> > To: BC-BFLegacyWorks@y...
> > Cc:
> > Subject: [BC-BFLegacyWorks] Re: Urgent, need to know
whether
> WRX seats will fit in a BC-BF legacy
> >
> >
> >
> > I have WRX front seats in my USDM Legacy Turbo.
> >
> > You have to swap the seatbelt buckles if you have the
> automatic
> > seatbelts. Legacy seat has 5 mounting holes, WRX
seat only
> has four
> > on each, so one is unused. Once they are in they
will be
> much taller
> > than your Legacy seats.
> >
> > --- In BC-BFLegacyWorks@y..., "georgerbyrne"
> <georgerbyrne@y...>
> > wrote:
> > > They will bolt straight in!
> > > No prob's/mods at all!
> > >
> > > You may have to bolt the rear inside bolts through
the
> current
> > > seatbelt plug mounts, but other than that they are
the same
> holes!
> > > George, Australia.
> > >
> > > --- In BC-BFLegacyWorks@y..., "milehial2000"
> <acroxford@h...> wrote:
> > > > I think you will be able to make them fit we
have done
> a lot
> > of
> > > > conversion work and that involved installing
Legacy and
> good
> > > > Loyale seats into just about any subie from
about '83 up.
> You
> > might
> > > > have to make some steel brackets if the width is
not the
> same. We
> > > used
> > > > to take 3" flat steel and run it across the
bottom and
> then mount
> > > the
> > > > rails to that and it worked great.
> > > > AL(CO)
> > > >
> > > >
> > > >
> > > > --- In BC-BFLegacyWorks@y..., "Josh Colombo"
<josh@s...>
> wrote:
> > > > > Title says pretty much what's up. I can get a
pretty
> good deal
> > > on
> > > > some WRX seats. They are definitely better then
my old
> worn
> > legacy
> > > > seats, which are meant for a wider body then
mine, plus
> are just
> > > old.
> > > > The seats don't come with the brackets, sliders
and such,
> as he
> > > used
> > > > them for his spacaros. I would assume I could
just bolt
> them up
> > to
> > > my
> > > > brackets........but I am not really sure. I
would need
> to rig
> > > > something with the little bottom seat belt holder
thing
> on mine,
> > so
> > > it
> > > > doesn't go all the way back.
> > > > >
> > > > > Other thing is my interior is tan.....seats are
goin to
> be
> > black
> > > and
> > > > gray......not the best combo........anyone have
any info
> on
> > > > re-upulstering.....or even just like a pull over
type
> covers that
> > > look
> > > > good.....I know they're out there.....just have
not dealt
> with
> > any.
> > > > >
> > > > > Thanks guys
> > > > >
> > > > > Josh
> >
> >
> > ------------------------ -------
--------
> ------~-->
> > Kwick Pick opens locked car doors,
> > front doors, drawers, briefcases,
> > padlocks, and more. On sale now!
> >
http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
> > ------------------------------------------------------
--------
> -------~->
> >
> > To unsubscribe from this group, please send an email
to:
> > BC-BFLegacyWorks-unsubscribe@e...
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
> ------------------------ ---------------
------~-->
> Kwick Pick opens locked car doors,
> front doors, drawers, briefcases,
> padlocks, and more. On sale now!
> http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
> --------------------------------------------------------------
-------~->
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
Josh
-----Original Message-----
From: georgerbyrne [mailto:georgerbyrne@yahoo.com]
Sent: Wed 6/5/2002 3:29 AM
To: BC-BFLegacyWorks@yahoogroups.com
Cc:
Subject: [BC-BFLegacyWorks] Re: Urgent, need to know whether WRX seats will fit in a BC-BF legacy
Gees, they're cheap over there!!!!
The going rate over here is about $600-$800 for a pair of front WRX
seats
And yet we have soooo many more WRX's!George.
--- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...> wrote:
> He want's $250 for them. Which is a really good price. I need to
double check on measurements and such to make sure everything works,
and they won't look too shitty.
>
> I'd have to drive up to dallas area to get them....but no biggy.
How do they look in the car? I was debating on gettin them re-
ulpolstered.
>
> josh
>
> -----Original Message-----
> From: dealerxing [mailto:saitam@n...]
> Sent: Tue 6/4/2002 7:55 PM
> To: BC-BFLegacyWorks@y...
> Cc:
> Subject: [BC-BFLegacyWorks] Re: Urgent, need to know whether
WRX seats will fit in a BC-BF legacy
>
>
>
> How much are you getting them for? I got them for
$300/pair. One of
> the seats has some rips on the back though, not very
noticeable.
> They were taken out since day 1 but one of them was damaged
before
> delivery.
>
> --- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...>
wrote:
> > Thanks for the info.
> >
> > I need to take some measures and such when I get back in
town. He
> used the rails, so I would have to use the Legacy rails. I
need to
> look more closely at things.
> >
> > Josh
> >
> > -----Original Message-----
> > From: dealerxing [mailto:saitam@n...]
> > Sent: Tue 6/4/2002 9:23 AM
> > To: BC-BFLegacyWorks@y...
> > Cc:
> > Subject: [BC-BFLegacyWorks] Re: Urgent, need to know
whether
> WRX seats will fit in a BC-BF legacy
> >
> >
> >
> > I have WRX front seats in my USDM Legacy Turbo.
> >
> > You have to swap the seatbelt buckles if you have the
> automatic
> > seatbelts. Legacy seat has 5 mounting holes, WRX
seat only
> has four
> > on each, so one is unused. Once they are in they
will be
> much taller
> > than your Legacy seats.
> >
> > --- In BC-BFLegacyWorks@y..., "georgerbyrne"
> <georgerbyrne@y...>
> > wrote:
> > > They will bolt straight in!
> > > No prob's/mods at all!
> > >
> > > You may have to bolt the rear inside bolts through
the
> current
> > > seatbelt plug mounts, but other than that they are
the same
> holes!
> > > George, Australia.
> > >
> > > --- In BC-BFLegacyWorks@y..., "milehial2000"
> <acroxford@h...> wrote:
> > > > I think you will be able to make them fit we
have done
> a lot
> > of
> > > > conversion work and that involved installing
Legacy and
> good
> > > > Loyale seats into just about any subie from
about '83 up.
> You
> > might
> > > > have to make some steel brackets if the width is
not the
> same. We
> > > used
> > > > to take 3" flat steel and run it across the
bottom and
> then mount
> > > the
> > > > rails to that and it worked great.
> > > > AL(CO)
> > > >
> > > >
> > > >
> > > > --- In BC-BFLegacyWorks@y..., "Josh Colombo"
<josh@s...>
> wrote:
> > > > > Title says pretty much what's up. I can get a
pretty
> good deal
> > > on
> > > > some WRX seats. They are definitely better then
my old
> worn
> > legacy
> > > > seats, which are meant for a wider body then
mine, plus
> are just
> > > old.
> > > > The seats don't come with the brackets, sliders
and such,
> as he
> > > used
> > > > them for his spacaros. I would assume I could
just bolt
> them up
> > to
> > > my
> > > > brackets........but I am not really sure. I
would need
> to rig
> > > > something with the little bottom seat belt holder
thing
> on mine,
> > so
> > > it
> > > > doesn't go all the way back.
> > > > >
> > > > > Other thing is my interior is tan.....seats are
goin to
> be
> > black
> > > and
> > > > gray......not the best combo........anyone have
any info
> on
> > > > re-upulstering.....or even just like a pull over
type
> covers that
> > > look
> > > > good.....I know they're out there.....just have
not dealt
> with
> > any.
> > > > >
> > > > > Thanks guys
> > > > >
> > > > > Josh
> >
> >
> > ------------------------ -------
--------
> ------~-->
> > Kwick Pick opens locked car doors,
> > front doors, drawers, briefcases,
> > padlocks, and more. On sale now!
> >
http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
> > ------------------------------------------------------
--------
> -------~->
> >
> > To unsubscribe from this group, please send an email
to:
> > BC-BFLegacyWorks-unsubscribe@e...
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
> ------------------------ ---------------
------~-->
> Kwick Pick opens locked car doors,
> front doors, drawers, briefcases,
> padlocks, and more. On sale now!
> http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
> --------------------------------------------------------------
-------~->
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com