1. What are the stock spring rates on our car(s)?
2. What aftermarket springs are available and what
are the spring rates for those? AFAIK, there's only
the Whitelines.
3. Can we use any suspension components for a GC8
impreza?
Thanks.
-Brian
__________________________________________________
Do You Yahoo!?
Great stuff seeking new owners in Yahoo! Auctions!
http://auctions.yahoo.com
------------------------ ---------------------~-->
Monitoring Service trial
http://us.click.yahoo.com/ACHqaB/bQ8CAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
Spring Questions?
Moderators: Helpinators, Moderators
-
legacycentral
Spring Questions?
1: i'm not sure, probably in the low to mid 100s.
2: See 3.
3: Pretty much any part that fits on a GC8 will fit the BC-BF just
fine. The Whiteline make a wagon-specific spring, and that's a great
choice, but not the only one.
The "cheap" route for a great non-"true"-coilover setup is the Ground
Control coilover-sleeve/AGX combo. I've heard mostly good things
about these and Rod even has a set on his wagon. Strut tower braces,
endlinks, etc... all fit fine EXCEPT for the swaybars. The GC8 rear
bar will NOT fit on my BF, so make sure you get one that's made for a
Legacy.
Dave
--- In BC-BFLegacyWorks@y..., Brian White <eastbaysubaru@y...> wrote:
> 1. What are the stock spring rates on our car(s)?
> 2. What aftermarket springs are available and what
> are the spring rates for those? AFAIK, there's only
> the Whitelines.
> 3. Can we use any suspension components for a GC8
> impreza?
>
> Thanks.
>
> -Brian
------------------------ ---------------------~-->
Access Your PC from Anywhere
Check Email & Transfer files - Free Download
http://us.click.yahoo.com/omECdA/3XkDAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
2: See 3.
3: Pretty much any part that fits on a GC8 will fit the BC-BF just
fine. The Whiteline make a wagon-specific spring, and that's a great
choice, but not the only one.
The "cheap" route for a great non-"true"-coilover setup is the Ground
Control coilover-sleeve/AGX combo. I've heard mostly good things
about these and Rod even has a set on his wagon. Strut tower braces,
endlinks, etc... all fit fine EXCEPT for the swaybars. The GC8 rear
bar will NOT fit on my BF, so make sure you get one that's made for a
Legacy.
Dave
--- In BC-BFLegacyWorks@y..., Brian White <eastbaysubaru@y...> wrote:
> 1. What are the stock spring rates on our car(s)?
> 2. What aftermarket springs are available and what
> are the spring rates for those? AFAIK, there's only
> the Whitelines.
> 3. Can we use any suspension components for a GC8
> impreza?
>
> Thanks.
>
> -Brian
------------------------ ---------------------~-->
Access Your PC from Anywhere
Check Email & Transfer files - Free Download
http://us.click.yahoo.com/omECdA/3XkDAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
kcylandarch
Spring Questions?
WHAT ABOUT PARTS FROM GD... WILL IT FIT ON A BC BODY... ?
THANKS
KAI
--- In BC-BFLegacyWorks@y..., "legacycentral" <legacycentral@y...>
wrote:
> 1: i'm not sure, probably in the low to mid 100s.
>
> 2: See 3.
>
> 3: Pretty much any part that fits on a GC8 will fit the BC-BF just
> fine. The Whiteline make a wagon-specific spring, and that's a
great
> choice, but not the only one.
>
> The "cheap" route for a great non-"true"-coilover setup is the
Ground
> Control coilover-sleeve/AGX combo. I've heard mostly good things
> about these and Rod even has a set on his wagon. Strut tower
braces,
> endlinks, etc... all fit fine EXCEPT for the swaybars. The GC8
rear
> bar will NOT fit on my BF, so make sure you get one that's made for
a
> Legacy.
>
> Dave
>
> --- In BC-BFLegacyWorks@y..., Brian White <eastbaysubaru@y...>
wrote:
> > 1. What are the stock spring rates on our car(s)?
> > 2. What aftermarket springs are available and what
> > are the spring rates for those? AFAIK, there's only
> > the Whitelines.
> > 3. Can we use any suspension components for a GC8
> > impreza?
> >
> > Thanks.
> >
> > -Brian
------------------------ ---------------------~-->
Free $5 Love Reading
Risk Free!
http://us.click.yahoo.com/3PCXaC/PfREAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
THANKS
KAI
--- In BC-BFLegacyWorks@y..., "legacycentral" <legacycentral@y...>
wrote:
> 1: i'm not sure, probably in the low to mid 100s.
>
> 2: See 3.
>
> 3: Pretty much any part that fits on a GC8 will fit the BC-BF just
> fine. The Whiteline make a wagon-specific spring, and that's a
great
> choice, but not the only one.
>
> The "cheap" route for a great non-"true"-coilover setup is the
Ground
> Control coilover-sleeve/AGX combo. I've heard mostly good things
> about these and Rod even has a set on his wagon. Strut tower
braces,
> endlinks, etc... all fit fine EXCEPT for the swaybars. The GC8
rear
> bar will NOT fit on my BF, so make sure you get one that's made for
a
> Legacy.
>
> Dave
>
> --- In BC-BFLegacyWorks@y..., Brian White <eastbaysubaru@y...>
wrote:
> > 1. What are the stock spring rates on our car(s)?
> > 2. What aftermarket springs are available and what
> > are the spring rates for those? AFAIK, there's only
> > the Whitelines.
> > 3. Can we use any suspension components for a GC8
> > impreza?
> >
> > Thanks.
> >
> > -Brian
------------------------ ---------------------~-->
Free $5 Love Reading
Risk Free!
http://us.click.yahoo.com/3PCXaC/PfREAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
Z1Auto@aol.com
Spring Questions?
just trying to confirm here...I can use springs for a GC8 (such as tein, which we carry) on a 91 Legacy Turbo? have heard mixed thiongs about the rear strut tops not working.
As for the coilovers, I would not recommend the GC's at all....it is a sleeved unit (albeit a beefy one), but we have seen LOADS of these fail even on very light cars (ITS CRX's, etc.) A true coilover is the better way to go, but a fair bit more expensive. The dedicated coilvoers from Tein, JIC, Cusco, and others are far ahead of the curve, and many include new strut top mounts (pillow balls, adjustable for camber in front, fixed in rear) as well...depends on the brand
adam
Adam
Z-1 Performance
www.z1auto.com
(631)254-8277
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
As for the coilovers, I would not recommend the GC's at all....it is a sleeved unit (albeit a beefy one), but we have seen LOADS of these fail even on very light cars (ITS CRX's, etc.) A true coilover is the better way to go, but a fair bit more expensive. The dedicated coilvoers from Tein, JIC, Cusco, and others are far ahead of the curve, and many include new strut top mounts (pillow balls, adjustable for camber in front, fixed in rear) as well...depends on the brand
adam
Adam
Z-1 Performance
www.z1auto.com
(631)254-8277
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .