Just completed an engine conversion from a japanese wrx half cut
(1994 model-manual) into a legacy touring wagon (1992-auto). Every
thing seems to be working fine except the engine sometimes cuts
out/flat spot when in 2nd, 3rd or 4th gear when you drive with your
foot flat to the floor. It always seems to happen between 4500 &
5000 RPM's and then is fine again after 5000 RPM's. Ran a diognostics
on the car which came up with error code number 43 (which does not
seem to exist). If anyone has any ideas on what it might be I would
appreciate to hear as I am sick of almost going through the
windscreen everytime it happens.
regards L.M.
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
ENGINE CUTOUT
Moderators: Helpinators, Moderators
-
Douglas Hancock
ENGINE CUTOUT
Sounds like fuel. When my tank is near finished it will cut out when going around a corner. Not saying you are out of fuel, but you might not be supplying enough to your engine.
-----Original Message-----
From: funky7031 [mailto:PMOODY@BIGPOND.NET.AU]
Sent: Monday, 1 July 2002 8:30 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] ENGINE CUTOUT
Just completed an engine conversion from a japanese wrx half cut
(1994 model-manual) into a legacy touring wagon (1992-auto). Every
thing seems to be working fine except the engine sometimes cuts
out/flat spot when in 2nd, 3rd or 4th gear when you drive with your
foot flat to the floor. It always seems to happen between 4500 &
5000 RPM's and then is fine again after 5000 RPM's. Ran a diognostics
on the car which came up with error code number 43 (which does not
seem to exist). If anyone has any ideas on what it might be I would
appreciate to hear as I am sick of almost going through the
windscreen everytime it happens.
regards L.M.
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
Your use of Yahoo! Groups is subject to the Yahoo! <http://docs.yahoo.com/info/terms/> Terms of Service.
ADVERTISEMENT
<http://rd.yahoo.com/M=178320.2150041.36 ... /yahoo-79f>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
-----Original Message-----
From: funky7031 [mailto:PMOODY@BIGPOND.NET.AU]
Sent: Monday, 1 July 2002 8:30 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] ENGINE CUTOUT
Just completed an engine conversion from a japanese wrx half cut
(1994 model-manual) into a legacy touring wagon (1992-auto). Every
thing seems to be working fine except the engine sometimes cuts
out/flat spot when in 2nd, 3rd or 4th gear when you drive with your
foot flat to the floor. It always seems to happen between 4500 &
5000 RPM's and then is fine again after 5000 RPM's. Ran a diognostics
on the car which came up with error code number 43 (which does not
seem to exist). If anyone has any ideas on what it might be I would
appreciate to hear as I am sick of almost going through the
windscreen everytime it happens.
regards L.M.
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
Your use of Yahoo! Groups is subject to the Yahoo! <http://docs.yahoo.com/info/terms/> Terms of Service.
ADVERTISEMENT
<http://rd.yahoo.com/M=178320.2150041.36 ... /yahoo-79f>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
-
Rod
ENGINE CUTOUT
have you got a boost gauge fitted? perhaps you are overboosting and hitting the fuel cut...
cheers, Rod ..in oz
----- Original Message -----
From: funky7031 <mailto:PMOODY@BIGPOND.NET.AU>
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, July 01, 2002 8:29 PM
Subject: [BC-BFLegacyWorks] ENGINE CUTOUT
Just completed an engine conversion from a japanese wrx half cut
(1994 model-manual) into a legacy touring wagon (1992-auto). Every
thing seems to be working fine except the engine sometimes cuts
out/flat spot when in 2nd, 3rd or 4th gear when you drive with your
foot flat to the floor. It always seems to happen between 4500 &
5000 RPM's and then is fine again after 5000 RPM's. Ran a diognostics
on the car which came up with error code number 43 (which does not
seem to exist). If anyone has any ideas on what it might be I would
appreciate to hear as I am sick of almost going through the
windscreen everytime it happens.
regards L.M.
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
cheers, Rod ..in oz
----- Original Message -----
From: funky7031 <mailto:PMOODY@BIGPOND.NET.AU>
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Monday, July 01, 2002 8:29 PM
Subject: [BC-BFLegacyWorks] ENGINE CUTOUT
Just completed an engine conversion from a japanese wrx half cut
(1994 model-manual) into a legacy touring wagon (1992-auto). Every
thing seems to be working fine except the engine sometimes cuts
out/flat spot when in 2nd, 3rd or 4th gear when you drive with your
foot flat to the floor. It always seems to happen between 4500 &
5000 RPM's and then is fine again after 5000 RPM's. Ran a diognostics
on the car which came up with error code number 43 (which does not
seem to exist). If anyone has any ideas on what it might be I would
appreciate to hear as I am sick of almost going through the
windscreen everytime it happens.
regards L.M.
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .