My Dyno Run

Collection of technical archives from the BC-BF LegacyWorks Yahoo! group.

Moderators: Helpinators, Moderators

Locked
adamarchibald

My Dyno Run

Post by adamarchibald »

Well I finally got my fuel pump and fuel pressure regulator
installed. Stuck the FWD fuse in and gave the car a bunch of runs on
the dyno. She pulled 145.2 hp and i believe 141 max torque. I have
the chart scanned and will post it for you guys to look at. I would
have liked to hit 150+ but I will blame it on being a very hot and
humid day when the test was ran. I now deffinitly need a new turbo
and an engine management system ;)

As for the drive impression after the fuel pump and fuel pressure
regulator, there is a noticable difference. The car pulls much
better near the top end, no more sloppy feeling. I am also looking
for an electronic boost controler first or second hand. Anyone have
any and what price (please list if they are in US, Canadian, Aus, etc
dollars).
Thanks Guys!
-Adam Archibald
(i will now start using my full name as there are two adams that post
alot. Try to reduce confusion.)
FREDERICK.WHITMORE@CN.CA

My Dyno Run

Post by FREDERICK.WHITMORE@CN.CA »

Adam,

What do you have done to your Legacy Turbo power wise??? Did you do a dyno
run when the car was still stock?

Fred
Z1Auto@aol.com

My Dyno Run

Post by Z1Auto@aol.com »

HKS EVCIV: $550.00 plus shipping

Adam
Z-1 Performance
www.z1auto.com
(631)254-8277
adamarchibald

My Dyno Run

Post by adamarchibald »

What are the charictoristics of the turbo? How much moding is
required?
adamarchibald

My Dyno Run

Post by adamarchibald »

Unfortunatly i never did i dyno run stock. Would have been nice to
have a base line, especially because we are not sure if the car pulls
propper number while in FWD mode. As for the mods here is the list.
IC install off a 95 EURO WRX
Over boost from 8psi to 13psi using manual boost controler (crap)
Custom 2.5' Exhasut with downpipe and high flow cat
K&N air filter (wow that added 10 hp atleast ;P )
removed snorkus from air intake
high pressure fuel pump, and fuel pressure regulator
that is it for engine mods

next on the block, bigger turbo, EMS, and EBC
-Adam Archibald
legacycentral

My Dyno Run

Post by legacycentral »

Can you get a little more specific on exactly you've added to your
car from stock?

Oh, and specifics on what pump and regulator?

I love the Apexi AVC-R, but the HKS and Blitz units are very nice as
well.

Dave
adamarchibald

My Dyno Run

Post by adamarchibald »

I will take some pictures of everything i can and post them with some
descriptions. Has anyone else dynoed their cars with simillar mods?
This was about the hourse power i expected still running with our
crappy little turbo, but does anyone have any number to compair?
Keep in mind all you Auzzies that this is a North American Legacy :(
legacycentral

My Dyno Run

Post by legacycentral »

Since Cobb Tuning is moving to Salt Lake City this year, i'll have
access to an AWD dyno, and am surely going to get some numbers from
my car when i get a chance.

Dave
Locked