Hi
Does anyone know how to check that the MAF sensor is giving a correct
reading?
Dick
MAF sensor
Moderators: Helpinators, Moderators
-
Josh Colombo
MAF sensor
You can measure the resistance between a couple of the pins to see if they are within spec. The other tests require you take readings while the car is running, and without stripping back wires, or sticking a pin through the wire to get a reading.....it's sort of difficult.
What sort of problems are you getting?
Josh
What sort of problems are you getting?
Josh
-
dpgnvq
MAF sensor
Hi
I want to check the MAF as I am getting a problem (that i have
posted) with the O2 sensor. The sensor is fine (new and checked) but
i still get an occasional code 32, I am looking for anything that is
induction related to make sure that it is 'in spec' so i can
eliminate it. I have no problem with tapping into the loom while the
car is running if i know what i am looking for. Any idas?
Dick
I want to check the MAF as I am getting a problem (that i have
posted) with the O2 sensor. The sensor is fine (new and checked) but
i still get an occasional code 32, I am looking for anything that is
induction related to make sure that it is 'in spec' so i can
eliminate it. I have no problem with tapping into the loom while the
car is running if i know what i am looking for. Any idas?
Dick
-
Josh Colombo
MAF sensor
I can scan you the info on the MAF sensor from the factory service manuals when I get back in town next friday. Shoot me an email to remind me.
Josh
Josh