Polyurethane bushing kit for 92 BC models?
Moderators: Helpinators, Moderators
-
pirategmunger
- In Neutral
- Posts: 45
- Joined: Fri Oct 30, 2009 5:06 pm
- Location: Minnesota City, MN 55959
Polyurethane bushing kit for 92 BC models?
I'm looking for a stiff Polyurethane bushing set for my 92 Legacy BC model. Can anyone give me some info?
-
IronMonkeyL255
- Fourth Gear
- Posts: 1902
- Joined: Sat Aug 09, 2003 5:02 pm
- Location: Woodruff, SC
The kit listed for GC Imprezas works.
I ordered the Superpro kit for mine and installed all the bushings myself (except those damn front A-arm bushings....) They have 2 different kits, but the only difference is which steering rack bushings it has included (25 or 30 mm wide brackets)
Give Dale at boxer4racing a call and tell him what you're looking for. To make sure, have him look up what kit C.J. with the legacy (that's probably how he knows me) got a few years back. I special ordered it and it took a few weeks to arrive.
I ordered the Superpro kit for mine and installed all the bushings myself (except those damn front A-arm bushings....) They have 2 different kits, but the only difference is which steering rack bushings it has included (25 or 30 mm wide brackets)
Give Dale at boxer4racing a call and tell him what you're looking for. To make sure, have him look up what kit C.J. with the legacy (that's probably how he knows me) got a few years back. I special ordered it and it took a few weeks to arrive.
Disclaimer: If anything I post is inaccurate, please correct me. I do not wish to add to the misinformation floating around on the internet.
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
-
IronMonkeyL255
- Fourth Gear
- Posts: 1902
- Joined: Sat Aug 09, 2003 5:02 pm
- Location: Woodruff, SC
Oh, and did you mean engine mounts and whatnot or suspension bushings? I was talking Suspension bushings without remembering i was in the engine forum. Anyways, here is the link to when I got the kit.
Clicky clicky!
If you are meaning engine mounts, go with the STI group N mounts. They aren't polyurethane, but instead a high durometer (very stiff) rubber. I also got the tranny mount bushings from TurninConcepts, which are poly and very stiff. About the only thing I haven't replaced at this point is the dogbone, and that is only because everyone wants WAY too damn much for them, IMHO.
Clicky clicky!
If you are meaning engine mounts, go with the STI group N mounts. They aren't polyurethane, but instead a high durometer (very stiff) rubber. I also got the tranny mount bushings from TurninConcepts, which are poly and very stiff. About the only thing I haven't replaced at this point is the dogbone, and that is only because everyone wants WAY too damn much for them, IMHO.
Disclaimer: If anything I post is inaccurate, please correct me. I do not wish to add to the misinformation floating around on the internet.
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
-
kimokalihi
- Fifth Gear
- Posts: 8360
- Joined: Mon Nov 06, 2006 3:41 am
- Location: Tenino, WA
Yeah you just gotta check NASIOC. I just bought the STI group N pitch mount new over there for $40 shipped.
98 Metro Hatch Daily Driver :)
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
So all engine mounts from impreza`s fit on legacy with EJ20 engine?IronMonkeyL255 wrote:Oh, and did you mean engine mounts and whatnot or suspension bushings? I was talking Suspension bushings without remembering i was in the engine forum. Anyways, here is the link to when I got the kit.
Clicky clicky!
If you are meaning engine mounts, go with the STI group N mounts. They aren't polyurethane, but instead a high durometer (very stiff) rubber. I also got the tranny mount bushings from TurninConcepts, which are poly and very stiff. About the only thing I haven't replaced at this point is the dogbone, and that is only because everyone wants WAY too damn much for them, IMHO.
Im asking because im quite desperate, lol, i have a dead engine mount (front left) and my only option (except from ebay or other web orders) is subaru dealer and the price for that engine mount is 600$
-
mike-tracy
- Moderator
- Posts: 5000
- Joined: Tue Aug 25, 2009 7:52 am
- Location: Des Moines, Wa
EJ motor mounts are interchangeable. Even though STI ones have a different shape, they still fit in your crossmember's motor-mount holes, and bolt up to the engine.
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: ↑Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
-
IronMonkeyL255
- Fourth Gear
- Posts: 1902
- Joined: Sat Aug 09, 2003 5:02 pm
- Location: Woodruff, SC