pistons

letsridestreet · Post by **letsridestreet** » Fri Dec 25, 2009 8:52 pm

who makes a good set of pistons for the ej22t engine?

race_to_live · Post by **race_to_live** » Sat Dec 26, 2009 7:10 am

wiseco

http://www.wiseco.com/Catalogs/SportCom ... Toyota.pdf

93forestpearl · Post by **93forestpearl** » Sat Dec 26, 2009 7:33 am

My Wisecos have held up well over the years. Their noisyness depends on how loose your machine shop makes them.

Just make sure you gap the rings properly. Wiseco includes a nice sheet stating what kind of ring gap you should have based on goals.

gijonas · Post by **gijonas** » Sat Dec 26, 2009 4:11 pm

I had the shop bore my engine fairly tight and they make no noise at all.

letsridestreet · Post by **letsridestreet** » Sun Dec 27, 2009 10:54 am

Now did you just use ej22t pistons or like ej20 ones?

gijonas · Post by **gijonas** » Sun Dec 27, 2009 5:43 pm

Ej22t forged pistons,they do make a kit just for our engines.bore it and drop them in.

letsridestreet · Post by **letsridestreet** » Sun Dec 27, 2009 6:42 pm

did you find t?he kit on there site

93forestpearl · Post by **93forestpearl** » Mon Dec 28, 2009 2:40 am

^ It is listed in their catalog. They have .020" or .040" overbore options, so the block must be bored and honed for installation.

If you are going through the trouble of a full engine teardown, bore, and rebuild, spend the $350 on a set of Eagle rods.

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

pistons

pistons