1990 Legacy Turbo engine swap

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
adam_r
In Neutral
Posts: 1
Joined: Mon Mar 08, 2010 10:22 pm

1990 Legacy Turbo engine swap

Post by adam_r »

Hello to everyone. New here and looking for a little help.
I have a 1990 legacy wagon 2wd. I put in a 1992 turbo engine, car runs fast but my problem is its running rich.It won't pass emissions. It was a complete drop in I have the air flow meter and the ecu from the turbo car. The turbo A/F has 4 wires the original A/F has five wires. The ecu from the turbo will not make the car run but it was running in the old car. Does anybody have a wiring diagram for these cars? Has anybody done a swap like this before? any help would be appreciated
Thanks Adam
Legacy777
Site Admin
Site Admin
Posts: 27932
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: 1990 Legacy Turbo engine swap

Post by Legacy777 »

Welcome to the BBS Adam. Please check out this thread for factory manual information.

http://bbs.legacycentral.org/viewtopic.php?f=12&t=14485

Also, there's been quite a few people that have performed that engine swap, so you may want to search around for some more info.

Was the 90 Legacy automatic or manual transmission?
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Post Reply