My 1991 Turbo Sedan

QuickDrive · Post by **QuickDrive** » Sun Nov 16, 2003 8:30 pm

Finally got pictures taken of it.

My digi cam sucks and the sun was in a bad spot, but here she is.

My first legacy

http://quickdraw.dynu.com/legacy

entirelyturbo · Post by **entirelyturbo** » Sun Nov 16, 2003 9:07 pm

Nice! To be honest, I think that is my color of choice for a Legacy Turbo. It shows the lines the best... Very clean!

LegacyT · Post by **LegacyT** » Sun Nov 16, 2003 9:12 pm

Very nice car, looks pretty clean too. Hope you keep her that way

Mark,

Kelly · Post by **Kelly** » Sun Nov 16, 2003 9:14 pm

It is nice in that color. good find

QuickDrive · Post by **QuickDrive** » Sun Nov 16, 2003 9:18 pm

I fully intend on keeping it clean...

In fact I'm taking it to get the roof rust removed and repainted next week, and I'm going to see what it would cost to touch up the chipped but touched up paint on the passenger front fender.

LegacyT · Post by **LegacyT** » Sun Nov 16, 2003 9:35 pm

Excelllllllent- Mr Burns Voice

Mark,

THAWA · Post by **THAWA** » Sun Nov 16, 2003 9:39 pm

hahah theres this guy at my work whos last name is burns and he looks like him too. Anyway your car looks great quick

.

QuickDrive · Post by **QuickDrive** » Sun Nov 16, 2003 9:40 pm

anyone wanna dump some Ideas to me for cosmetic mods? I'm not doing much.. but some would be nice..

THAWA · Post by **THAWA** » Sun Nov 16, 2003 9:43 pm

Get the chrome on the black molding going around the car black, tint the windows, and maybe smoke the lights, I don't know how legal it is but I haven't been pulled over in the three years I've been driving with them like that on either of my cars.

QuickDrive · Post by **QuickDrive** » Sun Nov 16, 2003 9:46 pm

THAWA wrote:Get the chrome on the black molding going around the car black

Paint it? or new molding?

Tint is deffinately on the list..

was thinking a new black i badge, and removing the chrome one from the rear as well

THAWA · Post by **THAWA** » Sun Nov 16, 2003 9:48 pm

I don't know how well that chrome stuff holds paint. I guess if you prepped it well enough it'd be fine.

Someone on nasioc posting a link to some products that you use to color chrome, can't remember it though

QuickDrive · Post by **QuickDrive** » Sun Nov 16, 2003 9:53 pm

I'll figure it out I'm sure

I haven't decided if I'm going to buy a 92 turbo I know of for parts. If I do though I could use it's molding, as well as door handles in black.

Problem is I have no where to park the parts car...

THAWA · Post by **THAWA** » Sun Nov 16, 2003 10:08 pm

I believe all the molding is black with a chrome stripe like yours

LegacyT · Post by **LegacyT** » Sun Nov 16, 2003 11:16 pm

clear corners, and dechromeing for sure. I painting my strips black. I scuffed the chrome with light sandpaper, than gave it a few coats of etching primer and then a few coats od semigloss black lacquer, blends right in with the rubber door trim. On the bumpers I just peeled off the chrome strip.

Mark,

HomeSlice · Post by **HomeSlice** » Mon Nov 17, 2003 10:30 am

VERY COOL! hope she stays looking like that. is that cdm or usdm>?
cheers,

QuickDrive · Post by **QuickDrive** » Mon Nov 17, 2003 3:07 pm

It's a Canadian Market 91 automatic..

Not sure what the difference is between em. though.

entirelyturbo · Post by **entirelyturbo** » Mon Nov 17, 2003 4:50 pm

I would recommend de-chroming the moldings, but there's another way to do it. Discount sells black tape that you can cover up your chrome with, I don't know if electrical tape will do just as good, but if you take your time and do it right (an Exacto knife would be your friend

), it would look really good.

legacy92ej22t · Post by **legacy92ej22t** » Mon Nov 17, 2003 10:00 pm

Very nice quick. I too like that color a lot

QuickDrive · Post by **QuickDrive** » Tue Nov 18, 2003 12:53 am

WOW

that's all I can say about driving it tonight.

I picked it up at around 5:00 and drove it for a good 3 hours...

Took it up to 115MPH and busted a weld on the original muffler, (assuming it happened then) now it has a nice low rumbling sound,
so that is the "suby" sound everyone is talking about.

I may jb weld it, but I may just let it rot off and get the 2.5" catless turbo back in the spring...

THAWA · Post by **THAWA** » Tue Nov 18, 2003 7:26 am

Yep thats the grumble, hopefully you wont be a fool like me and damage your heat shields so you get a cracking sound when you are at certain rpms, really blows.

QuickDrive · Post by **QuickDrive** » Tue Nov 18, 2003 2:42 pm

Naw, when I was under it last the heat shields were pretty much gone and rotted off, so not much stuff left to rattle about

Legacytuner · Post by **Legacytuner** » Wed Nov 19, 2003 2:02 am

HELL YEH!!! SAME COLOR AS MINE SLATE METALLIC
BE GOOD TO IT!!!!!!!!!

eastbaysubaru · Post by **eastbaysubaru** » Wed Nov 19, 2003 2:50 am

So that color's called Slate Metallic is it? Good to know.

-Brian

QuickDrive · Post by **QuickDrive** » Wed Nov 19, 2003 3:26 am

Slate Metallic, wicked color name.

I'm going to be very good to her/it.

She's going in for some touch up painting next week and a new windshield.

This thread will end up being my picture update and story about (name goes here)

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

My 1991 Turbo Sedan

My 1991 Turbo Sedan