Bushings to help with squatting rear end
Moderators: Helpinators, Moderators
Re: What did you do to your Subie today?
does anyone know if these can be used on first gens? not these persay but something like them
http://www.ebay.com/itm/TORQUE-SOLUTION ... 0870426444
http://www.ebay.com/itm/TORQUE-SOLUTION ... 0870426444
Re: What did you do to your Subie today?
Those bushings are for a completely different suspension design of the newer Subarus.
They do make upgraded poly bushings to fit our cars, but it would help to know which bushing you're wanting to replace.
They do make upgraded poly bushings to fit our cars, but it would help to know which bushing you're wanting to replace.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
Bushings to help with squatting rear end
what ever bushings in the rear that will help with the handling and hopefully lessen the launch squat lol
Re: What did you do to your Subie today?
turbo970 wrote:what ever bushings in the rear that will help with the handling and hopefully lessen the launch squat lol
All bushings in the rear will affect handling to some extent, however none really affect the squat of the car under launch. The anti-lift kit does help with front end lifting under acceleration. Stiffer rear springs would also help.
Are you experiencing any sort of issues or problems that you are trying to correct with the bushings?
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
Re: What did you do to your Subie today?
i just know they are old and and when i take off hard the nose goes up and the rear squats bad. and with my back stiffer springs wouldnt be good.
Re: What did you do to your Subie today?
From what I understand, the ALK actually does the opposite of this. It removes some of the anti-lift geometry in the front suspension, allowing freer extension of the front wheels which allows the front tires to maintain more consistent contact with the road and improve traction. But the result of greater front wheel traction is probably what you are after anyways.Legacy777 wrote:The anti-lift kit does help with front end lifting under acceleration.turbo970 wrote:what ever bushings in the rear that will help with the handling and hopefully lessen the launch squat lol
93 Touring Wagon (EJ20G 5spd Swap) -- Finally back and running strong as ever!
05 Outback 2.5XT 5spd -- Now the wife can have her SUV and get in on the turbo Legacy goodness at the same time.
05 Outback 2.5XT 5spd -- Now the wife can have her SUV and get in on the turbo Legacy goodness at the same time.
Re: What did you do to your Subie today?
Legacy777 wrote:turbo970 wrote:what ever bushings in the rear that will help with the handling and hopefully lessen the launch squat lol
All bushings in the rear will affect handling to some extent, however none really affect the squat of the car under launch. The anti-lift kit does help with front end lifting under acceleration. Stiffer rear springs would also help.
Are you experiencing any sort of issues or problems that you are trying to correct with the bushings?
Could correcting the rear geometry with these help with squat?
http://turninconcepts.com/suspension/im ... hings.html
Re: What did you do to your Subie today?
GTEASER wrote:Legacy777 wrote:turbo970 wrote:what ever bushings in the rear that will help with the handling and hopefully lessen the launch squat lol
All bushings in the rear will affect handling to some extent, however none really affect the squat of the car under launch. The anti-lift kit does help with front end lifting under acceleration. Stiffer rear springs would also help.
Are you experiencing any sort of issues or problems that you are trying to correct with the bushings?
Could correcting the rear geometry with these help with squat?
http://turninconcepts.com/suspension/im ... hings.html
turbo970,
How badly does it squat, and how are you measuring/realizing it's squatting badly?
I personally don't think if you have good working components that you should be seeing excessive squat under acceleration. So I'd start with making sure the suspension components are in good working order. Otherwise, the squat you're experiencing may just be "normal" for these cars and if you don't like it, you'll need to modify the suspension to correct it.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
Re: What did you do to your Subie today?
My bad, you are correct. It actually removes anti lift & dive geometry. Here are a couple links for more info.James614 wrote:From what I understand, the ALK actually does the opposite of this. It removes some of the anti-lift geometry in the front suspension, allowing freer extension of the front wheels which allows the front tires to maintain more consistent contact with the road and improve traction. But the result of greater front wheel traction is probably what you are after anyways.Legacy777 wrote:The anti-lift kit does help with front end lifting under acceleration.turbo970 wrote:what ever bushings in the rear that will help with the handling and hopefully lessen the launch squat lol
http://www.whiteline.com.au/articles/Ef ... 0ALK_b.pdf
http://bbs.legacycentral.org/viewtopic.php?f=16&t=22752
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
Re: Bushings to help with squatting rear end
Bushings are not going to do much to help you (although I always recommend fresh ones) and like others have mentioned the alk will slightly increase squat. Think of it as a kit for anti-lift, and not an anti lift kit.
If you were to raise the front trailing arm mount, it would add anti-squat, but given the bushing is bolted right to the chassis there isn't a whole lot you can do.
Those arms will also not help, especially if you are around stock ride height. They are a different length to keep the lateral links pointed straight out when the car is lowered. Having them at a sharper angle can cause bushing wear and binding in the suspension.
Really the only effective way to decrease squat and dive are with higher spring rates. However, if you're on old struts, they will not be controlling the motion of the car and you will definitely get extra body movement under acceration loads. What shocks and how old are they?
If you were to raise the front trailing arm mount, it would add anti-squat, but given the bushing is bolted right to the chassis there isn't a whole lot you can do.
Those arms will also not help, especially if you are around stock ride height. They are a different length to keep the lateral links pointed straight out when the car is lowered. Having them at a sharper angle can cause bushing wear and binding in the suspension.
Really the only effective way to decrease squat and dive are with higher spring rates. However, if you're on old struts, they will not be controlling the motion of the car and you will definitely get extra body movement under acceration loads. What shocks and how old are they?
Re: Bushings to help with squatting rear end
new struts all 4 corners. old springs tho. my daughter's g pa saw it squat to the point the rear wheels tucked up in the wheel wells. he crawled under and say the rear diff mount bushings were shot. plus he thinks the springs are weak. thats why why i asked about those incerts. then i saw some stiffer bushings on rally sport. so i thought i'd ask on here
Re: Bushings to help with squatting rear end
I believe those MSI arms are to correct geometry for lowered suspensions (MSI has an entire rear sub frame to go with that), not necessarily reduce squat in general. I personally would look at some updatedsprings before the bushings, as those can be quite a pain and IMO probably not your issue
93 Touring Wagon (EJ20G 5spd Swap) -- Finally back and running strong as ever!
05 Outback 2.5XT 5spd -- Now the wife can have her SUV and get in on the turbo Legacy goodness at the same time.
05 Outback 2.5XT 5spd -- Now the wife can have her SUV and get in on the turbo Legacy goodness at the same time.
Re: Bushings to help with squatting rear end
The rear wheels are going to tuck under the wheel wells. The rear fender arches/wells are lower than the front.....that's just the nature of the car.turbo970 wrote:new struts all 4 corners. old springs tho. my daughter's g pa saw it squat to the point the rear wheels tucked up in the wheel wells. he crawled under and say the rear diff mount bushings were shot. plus he thinks the springs are weak. thats why why i asked about those incerts. then i saw some stiffer bushings on rally sport. so i thought i'd ask on here
Personally I think you may be trying to fix an non-existent problem. If you have a specific issue with handling or see a visible issue with a suspension component then I'd try and fix that.
How did he verify the bushings were "shot". Unless they are torn the bushings should be ok. They may be worn and not provide the best resistance to movement, but may still be functional.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
Re: Bushings to help with squatting rear end
do wagons squat more than sedans?
Re: Bushings to help with squatting rear end
More than likely yes, there is more weight in the rear.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
Re: Bushings to help with squatting rear end
well poo lol.i guess i'll have to get new springs. just what ones i'm not sure
Re: Bushings to help with squatting rear end
Wagons have firmer rear springs than sedans, 190lbs. They are similar in stiffness to GD STI pink springs. Just a heads up as many aftermarket springs for the GC and GD are actually softer than that.
93 Touring Wagon (EJ20G 5spd Swap) -- Finally back and running strong as ever!
05 Outback 2.5XT 5spd -- Now the wife can have her SUV and get in on the turbo Legacy goodness at the same time.
05 Outback 2.5XT 5spd -- Now the wife can have her SUV and get in on the turbo Legacy goodness at the same time.
Re: Bushings to help with squatting rear end
I just put some H&r springs on my 93 legacy, and it helped quite a bit. I've heard good things about b&g s2 springs as well, but never rode on a set.
93 Legacy l AWD 5mt
87 GL-10 Turbo 5mt
87 GL-10 Turbo 5mt