WRX Pedal Assembly?

James614 · Post by **James614** » Mon May 06, 2013 5:30 am

Will a WRX clutch/brake pedal assembly work on our cars? I know they used electronic throttles (eew), but can I get a set without the throttle and use my stock throttle pedal?

beatersubi · Post by **beatersubi** » Mon May 06, 2013 5:44 am

I have a set sitting here waiting to go in my car when I swap in the 5mt. The mounting looks the same as a Legacy.

PhyrraM · Post by **PhyrraM** » Mon May 06, 2013 7:24 am

IIRC, there is one or two bolts that are 'close', but not exactly the same place. The remaining 4 bolts are the same.

'02-'05 WRXs (2.0s) are also throttle cable, and the accelerator pedal should work fine.

Someperson · Post by **Someperson** » Mon May 06, 2013 3:31 pm

I have a set for sale and can confirm the 02-05s are cable throttle. They will work and iirc you may need to swap out the sensors in them

James614 · Post by **James614** » Mon May 06, 2013 11:47 pm

Thanks for the replies! It opens up my options quite a bit.

BoostedSubie · Post by **BoostedSubie** » Tue May 07, 2013 4:34 am

I tried putting an 02 wrx pedal assembly in my Legacy awhile back and the clutch master bolts didn't line up if I remember right.

James614 · Post by **James614** » Tue May 07, 2013 11:51 am

Well damn...

Someperson · Post by **Someperson** » Tue May 07, 2013 4:44 pm

Bolts are slightly off, can make it work w/ a dremel

cj91legss · Post by **cj91legss** » Wed May 08, 2013 3:57 pm

Someperson wrote:Bolts are slightly off, can make it work w/ a dremel

For the sake of future searches, What bolts/holes are off, The Clutch Bolts only, or are the bolt holes for the brake booster off as well?

Someperson · Post by **Someperson** » Wed May 08, 2013 5:35 pm

I'll ask sqc151 cause i forget which 2 are off. But 2 line up and 2 are off i want to say it was the clutch side that were off...

cj91legss · Post by **cj91legss** » Thu Apr 30, 2015 3:49 pm

Yep I'm doing it, Almost 2 year bump.

I have that awful screeching sound every time I push in my clutch. I need it gone.

Has anyone got some photos or solid information before I commit to buying a newer pedal set?

MConte05 · Post by **MConte05** » Thu Apr 30, 2015 7:05 pm

Spray some lube up in there? There is a big spring assembly that helps with the clutch kickback. If you push your seat back all the way, or remove it, it's pretty easy to get into. I bet you it's just caked with crap.

cj91legss · Post by **cj91legss** » Fri May 01, 2015 1:38 pm

I could do that, but that would be too easy.

Maybe I was just using that squeeking as an excuse

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

WRX Pedal Assembly?

WRX Pedal Assembly?

Re: WRX Pedal Assembly?

Re: WRX Pedal Assembly?

Re: WRX Pedal Assembly?

Re: WRX Pedal Assembly?

Re: WRX Pedal Assembly?

Re: WRX Pedal Assembly?

Re: WRX Pedal Assembly?

Re: WRX Pedal Assembly?

Re: WRX Pedal Assembly?

Re: WRX Pedal Assembly?

Re: WRX Pedal Assembly?

Re: WRX Pedal Assembly?