Stainless Steel Turbo Inlet/Coffee Can Mod
Moderators: Helpinators2, Moderators
Forum rules
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
-
- Fourth Gear
- Posts: 1232
- Joined: Tue Jul 31, 2012 10:32 pm
- Location: Portland, Oregon.
Stainless Steel Turbo Inlet/Coffee Can Mod
Got a stainless inlet to delete the intake box for EJ22T or EJ20G. I used it for 100 miles before my car went under the knife again. I'm asking $125 shipped! I paid $150 for it. PM or text 503-840-2286
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
the guy who had the really low winestone SS on the corvette wheels
-
- First Gear
- Posts: 67
- Joined: Sat May 11, 2013 3:33 pm
Re: Stainless Steel Turbo Inlet/Coffee Can Mod
happen to have any installed pics? any gains with using this alone?
Last edited by burnt_toast on Fri Feb 26, 2016 3:42 am, edited 1 time in total.
'94 Legacy Turbo Touring Wagon; kyb gr2's/mostly stock
'05 Toyota Corolla XRS - 1.8L 2zz-ge, 6speeds of revtastic fury
'05 Toyota Corolla XRS - 1.8L 2zz-ge, 6speeds of revtastic fury
-
- Fourth Gear
- Posts: 1232
- Joined: Tue Jul 31, 2012 10:32 pm
- Location: Portland, Oregon.
Re: Stainless Steel Turbo Inlet/Coffee Can Mod
No pics, i'll try and get some on another car as mine is all apart. It just gets rid of the big intake box: more flow, more turbo sound, cleaner look.
the guy who had the really low winestone SS on the corvette wheels
Re: Stainless Steel Turbo Inlet/Coffee Can Mod
Got anymore? @robertpaige
Re: Stainless Steel Turbo Inlet/Coffee Can Mod
you should get that guy to make a few of them
Tony
90 LS Spec rio red sold
91 SS rio red R.I.P
90 Mazda Miata
2005 GT SWP
90 LS Spec rio red sold
91 SS rio red R.I.P
90 Mazda Miata
2005 GT SWP
92ss satinsvoice wrote:LOL! that block was like F*** THIS! IM OUT!
mike-tracy wrote:Word. I'd love to get my hands on one of those trannies, but I just can't stomach the cost
-
- Fourth Gear
- Posts: 1232
- Joined: Tue Jul 31, 2012 10:32 pm
- Location: Portland, Oregon.
Re: Stainless Steel Turbo Inlet/Coffee Can Mod
I have two being made right now for people. They're $160 to be fabbed up.
the guy who had the really low winestone SS on the corvette wheels
Re: Stainless Steel Turbo Inlet/Coffee Can Mod
very nice!. Maybe one day when I get another car
Tony
90 LS Spec rio red sold
91 SS rio red R.I.P
90 Mazda Miata
2005 GT SWP
90 LS Spec rio red sold
91 SS rio red R.I.P
90 Mazda Miata
2005 GT SWP
92ss satinsvoice wrote:LOL! that block was like F*** THIS! IM OUT!
mike-tracy wrote:Word. I'd love to get my hands on one of those trannies, but I just can't stomach the cost
-
- First Gear
- Posts: 67
- Joined: Sat May 11, 2013 3:33 pm
Re: Stainless Steel Turbo Inlet/Coffee Can Mod
I like it. how does the MAF attach? And this is all bolt-on essentially? Works with stock ecu or does it need tunerobertpaige wrote:No pics, i'll try and get some on another car as mine is all apart. It just gets rid of the big intake box: more flow, more turbo sound, cleaner look.
'94 Legacy Turbo Touring Wagon; kyb gr2's/mostly stock
'05 Toyota Corolla XRS - 1.8L 2zz-ge, 6speeds of revtastic fury
'05 Toyota Corolla XRS - 1.8L 2zz-ge, 6speeds of revtastic fury
Re: Stainless Steel Turbo Inlet/Coffee Can Mod
There is a silicon coupler between the MAF housing and this component. It will work fine with the stock ECU, no tune required.
maciek puszynski
01 Impreza | v6 STi RA | 5mt | ej236t
93 Legacy Turbo | TW | 4eat | ej22t
16 WRX | 6mt | fa20
98 Legacy GT | wagon | 5mt | ej25d
2.36L Turbo - RSTi Build
01 Impreza | v6 STi RA | 5mt | ej236t
93 Legacy Turbo | TW | 4eat | ej22t
16 WRX | 6mt | fa20
98 Legacy GT | wagon | 5mt | ej25d
2.36L Turbo - RSTi Build
-
- First Gear
- Posts: 67
- Joined: Sat May 11, 2013 3:33 pm
Re: Stainless Steel Turbo Inlet/Coffee Can Mod
Is this still available?? Will buy if so! Please let me know.
Just cracked a spigot off my current one while trying to chase another dam coolant leak.. (was right underneath) not to mention previous owner had siliconed a tear in it badly needs replacing
PM me your paypal and I will send payment right away!
few more questions too: On stock tube, there is one more spigot/line toward the very bottom, right next to the number 5 in last picture. What happens to that line?
Also on the stock intake resonator box, there is a tapped copper fitting fitting on inlet side. What is this for, and what would I do with it?
pics of both issues attached, click for full, last pic if what the line from that copper barb goes to..
Just cracked a spigot off my current one while trying to chase another dam coolant leak.. (was right underneath) not to mention previous owner had siliconed a tear in it badly needs replacing
PM me your paypal and I will send payment right away!
few more questions too: On stock tube, there is one more spigot/line toward the very bottom, right next to the number 5 in last picture. What happens to that line?
Also on the stock intake resonator box, there is a tapped copper fitting fitting on inlet side. What is this for, and what would I do with it?
pics of both issues attached, click for full, last pic if what the line from that copper barb goes to..
'94 Legacy Turbo Touring Wagon; kyb gr2's/mostly stock
'05 Toyota Corolla XRS - 1.8L 2zz-ge, 6speeds of revtastic fury
'05 Toyota Corolla XRS - 1.8L 2zz-ge, 6speeds of revtastic fury
-
- First Gear
- Posts: 220
- Joined: Wed Apr 10, 2013 6:43 am
- Location: Key West, Florida
Re: Stainless Steel Turbo Inlet/Coffee Can Mod
Still available?