So I did a smoke test on my car a work and found out the the guy i bought the car from did not hook up the two elbows from intake to turbo. I know the intake elbow is smaller diameter than the one going to the turbo (td04L).
what are my options of hooking the two together?
pic toinght
Turbo elbow to intake elbow?
Moderators: Helpinators, Moderators
Turbo elbow to intake elbow?
1991 subaru legacy sport sedan
-
- First Gear
- Posts: 227
- Joined: Mon Feb 20, 2012 5:44 pm
- Location: Salt Lake City, UT
Re: Turbo elbow to intake elbow?
Good thread here: viewtopic.php?f=3&t=38598
93 SS - SOLD
03 WRX 22T/205 20GXT 350 whp
06 OBXT
95 BK - Sold to my neighbor.
03 WRX 22T/205 20GXT 350 whp
06 OBXT
95 BK - Sold to my neighbor.
-
- Moderator
- Posts: 5000
- Joined: Tue Aug 25, 2009 7:52 am
- Location: Des Moines, Wa
Re: Turbo elbow to intake elbow?
I grabbed a short length of steel exhaust pipe from AutoZone, and cut and deburred the appropriate length
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: ↑Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
Re: Turbo elbow to intake elbow?
figured it out just bought a 2.4" into 2" elbow and using a 2" pipe to connect the two tubes.
1991 subaru legacy sport sedan
-
- Moderator
- Posts: 5000
- Joined: Tue Aug 25, 2009 7:52 am
- Location: Des Moines, Wa
Re: Turbo elbow to intake elbow?
Nice! For future searchers, what parts specifically did you use?
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: ↑Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
Re: Turbo elbow to intake elbow?
https://www.ebay.com/itm/2-TO-2-5-4PLY- ... 0A&vxp=mtr
and went to home depot and got a 2" copper pipe and cut to length.
but this elbow will not work with the stock turbo for the 91 legacy. It will work with the td04
and went to home depot and got a 2" copper pipe and cut to length.
but this elbow will not work with the stock turbo for the 91 legacy. It will work with the td04
1991 subaru legacy sport sedan