It's heeeeere, Deadbolt monster 16G!

legacy92ej22t · Post by **legacy92ej22t** » Sat Jul 24, 2004 5:27 am

Hehehehehehe, I'm stoked! I can't wait to get going on this. I hope to have it in before the meet.

Isn't it pretty?

THAWA · Post by **THAWA** » Sat Jul 24, 2004 5:34 am

evolutionmovement · Post by **evolutionmovement** » Sat Jul 24, 2004 6:27 am

Damn that looks beautiful and encourages me not to give up on 3-cyl. Barbarella. If I wanted three cyls I'd have bought a Justy. My turbo will have to wait a little longer now.

Steve

BAC5.2 · Post by **BAC5.2** » Sat Jul 24, 2004 7:07 am

Bastard

I'll be there next year, except I've gotta go a different route, lol. We need to break the mod similarity, haha.

legacy92ej22t · Post by **legacy92ej22t** » Sat Jul 24, 2004 7:13 am

Ya, you should get an IHI VF23!

This thing is super sweet guys. The ceramic coating is beeeauuuutiful! I can't wait to get it in. I'm going to have to figure out my compressor outlet to TMIC piping though. The outlet is at a 90 instead of a 45 like the VF11.

rsstiboy · Post by **rsstiboy** » Sat Jul 24, 2004 9:27 am

is that a modified TD05H? or a stock unit?

THAWA · Post by **THAWA** » Sat Jul 24, 2004 9:44 am

http://bbs.legacycentral.org/viewtopic. ... 4618#54618

and the rest of that thread should have more info, also http://www.deadboltspeed.com/

NICO · Post by **NICO** » Sat Jul 24, 2004 12:58 pm

how can i get that 90 degree houseing that will fit a tdo4l.

legacy92ej22t · Post by **legacy92ej22t** » Sat Jul 24, 2004 2:47 pm

NICO I WRX U wrote:how can i get that 90 degree houseing that will fit a tdo4l.

Contact Jerry at Deadbolt. He's a great guy to deal with and really knows his stuff, I highly recommend his services. He can hook you up with a 90 degree for your TD04. He actually specifically mentions being able to do that in his thread in the Vendor forum.

QuickDrive · Post by **QuickDrive** » Sat Jul 24, 2004 2:49 pm

That's sharp Matt, will it be a direct replacement? no mods needed aside from your TMIC?

legacy92ej22t · Post by **legacy92ej22t** » Sat Jul 24, 2004 2:50 pm

rsstiboy wrote:is that a modified TD05H? or a stock unit?

It is a BRAND NEW TD05H (like the ones on your Ausie 93-96 STI's) that has been Monster ported and has ceramic coating on the compressor housing and the exhaust turbine housing. It also has the coolant lines set up for the USDM Legacy turbo so that may be why it might look different then what you're used to.

I can't wait to get it in!

magicmike · Post by **magicmike** » Sat Jul 24, 2004 3:26 pm

Hate to tell you this but it looks like that inlet elbo will hit your intake manifold. I ran into a similar prob with my vf34.......

-Mike

legacy92ej22t · Post by **legacy92ej22t** » Sat Jul 24, 2004 3:40 pm

QuickDrive wrote:That's sharp Matt, will it be a direct replacement? no mods needed aside from your TMIC?

AFAIK, yes, it should drop right in.

The compressor outlet is my only worry.

legacy92ej22t · Post by **legacy92ej22t** » Sat Jul 24, 2004 3:45 pm

magicmike wrote:Hate to tell you this but it looks like that inlet elbo will hit your intake manifold. I ran into a similar prob with my vf34.......

-Mike

The inlet or the outlet? The inlet isn't even near the intake manifold. The outlet has me a little worried though. I know guys are running this exact same turbo on the EJ22T so it must work without too much problem. I always heard the biggest problem was switching the coolant lines around but mine are already set up so that shouldn't be a problem.

What did you do with your VF34?

magicmike · Post by **magicmike** » Sat Jul 24, 2004 5:58 pm

the inlet elbo comes up right next to the intake manifold. when installing a larger turbo (one that has a larger compressor side housing) the inlet elbo keeps inching towards the intake manifold (or the front of the engine) All I know is that I had to make a totally custom elbo pipe to get by the small gap I had between the turbo inlet and the intake manifold. I'll get some pics up......

-Mike

mTk · Post by **mTk** » Sat Jul 24, 2004 7:11 pm

Have you run the vf34 yet? That elbow seems like a massive intake restriction.

MK

legacy92ej22t · Post by **legacy92ej22t** » Sat Jul 24, 2004 7:37 pm

magicmike wrote:the inlet elbo comes up right next to the intake manifold. when installing a larger turbo (one that has a larger compressor side housing) the inlet elbo keeps inching towards the intake manifold (or the front of the engine) All I know is that I had to make a totally custom elbo pipe to get by the small gap I had between the turbo inlet and the intake manifold. I'll get some pics up......

Oh ya, ok I see what you're talking about. Sorry, I guess I was thinking about the TB istead of the intake manifold.

Ya, it is tight there but mine should fit. The 90 degree elbow on mine starts turning up sooner I think because your VF34 has the straight inlet instead of the 90 degree like mine.

That looks VERY restrictive

. Is there anyway you could do a custome intake and go under the intake manifold or is it too tight?

THAWA · Post by **THAWA** » Sat Jul 24, 2004 8:53 pm

you think there's enough space to do liek the wrx's have and have it go under the manifold or no?

mTk · Post by **mTk** » Sat Jul 24, 2004 9:04 pm

There's not

MK

NICO · Post by **NICO** » Sun Jul 25, 2004 11:13 am

i read in a book that the 90degree was good, it was a ausie book about wrxs. in the book they siad it makes good power.

vrg3 · Post by **vrg3** » Sun Jul 25, 2004 10:32 pm

That looks schweeeeet.

Hmm, that upper coolant line looks like it's pointed in the appropriate direction for cars that have the coolant filler tank in the front right of the engine bay (i.e. all EJ turbo cars except ours).

rsstiboy · Post by **rsstiboy** » Sun Jul 25, 2004 10:41 pm

i would prefer to twist my turbo and chop the 90 degree bend off, I don't care what anyone says, but the 90 degree bend hinders more than helps.......

TDGKORN · Post by **TDGKORN** » Mon Jul 26, 2004 3:18 pm

Badass!

I can't wait til I can efford mine.

How much did it cost in the end (I will be getting the same options as you)?

When are you planning on putting it in?

magicmike · Post by **magicmike** » Mon Jul 26, 2004 11:06 pm

havent been on in a few days.....I know it is a huge restiction but I had no other option. its that way or no way....

vrg3 · Post by **vrg3** » Tue Jul 27, 2004 12:13 am

Well, the other way would be to trim the compressor inlet tube down a little... Or to cut it off entirely and weld on studs to mount the stock inlet elbow on it.

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

It's heeeeere, Deadbolt monster 16G!

It's heeeeere, Deadbolt monster 16G!