Best place to buy stock ej22t rods and pistons?

[douglas vincent]

Since i most likely will blow my engine sometime when I try WAY too much nitrous combined w/ the supercharger down the line at the track, I suspect the failure will be a connecting rod or piston. Who gives a good deal on the ej22t stuff? Since I am not pushing huge boost, I can live with just stock internals from the better engine.

Thanks

[morgie]

i have 10 connecting rods laying around..

i could sell you them for cheap if you pay shipping

7 from 2.0l WRX, 3 from 2.2l Leg Turbo.

it is not recommended to use used pistons and rings.. as this could end in them not seating correctly and leaking oil as hell.. hehe

[douglas vincent]

Used connecting rods I could live with. Am I correct that the connecting rods for turbo 2.2 are stronger and different than NA 2.2's?

Pistons I would only do new.

[Matt Monson]

Crawford Performance generally has these available for pretty cheap. They are doing high powered EJ22T builds and take out brand new stock rods and pistons and sell them off. I made a thread about this here in the For Sale a few months ago that should link you straight to their posting on NASIOC. IIRC, he wanted $100 a set for pistons...

You might also try Axis Power Racing who does the same sort of builds with EJ22T blocks...