Engine Pics

J-MoNeY · Post by **J-MoNeY** » Mon Oct 04, 2004 12:44 am

I don't have a manual of what all goes in the engine and how it goes togeather with all the little lines. Are there any PDF's I can read about it?

vrg3 · Post by **vrg3** » Mon Oct 04, 2004 12:54 am

Little lines?

Start by checking all the sticky threads in each category, and see if that gets you what you want.

J-MoNeY · Post by **J-MoNeY** » Mon Oct 04, 2004 12:59 am

vrg3 wrote:Little lines?

Start by checking all the sticky threads in each category, and see if that gets you what you want.

I did.

vrg3 · Post by **vrg3** » Mon Oct 04, 2004 1:02 am

Hmm, okay... so you've got the factory service manual for the engine, fuel injection, fuel system, and most of the relevant electrical system, my vacuum and PCV diagrams, my ECU pinouts... What exactly do you mean by "go together with the little lines?"

magicmike · Post by **magicmike** » Mon Oct 04, 2004 1:34 am

I have tons of pics of my engine rebuild. Just look around

here
http://www.thawa.net/gallery/album13

J-MoNeY · Post by **J-MoNeY** » Mon Oct 04, 2004 2:08 am

vrg3 wrote:Hmm, okay... so you've got the factory service manual for the engine, fuel injection, fuel system, and most of the relevant electrical system, my vacuum and PCV diagrams, my ECU pinouts... What exactly do you mean by "go together with the little lines?"

Mailny the small water lines that run under the intake.

vrg3 · Post by **vrg3** » Mon Oct 04, 2004 2:14 am

Ah, okay.

Look at the parts manual Josh posted. The relevant sections are Water Pump, Intake Manifold, Engine Cooling System, and Throttle Body. Maybe that combined with the block diagrams in the Engine Cooling System section of the engine manual that Josh posted will give you the info you need.

douglas vincent · Post by **douglas vincent** » Mon Oct 04, 2004 3:28 am

Please, please, please, spend the fucking $9 and get a manual. And I am a cheapskate. But spend the freaking money. Not only will you get more respect here, you will actuall USE it over and over when you are not near a computer.

91legacyman · Post by **91legacyman** » Mon Oct 04, 2004 3:57 am

lol im constantly reading my haynes for my car but sometimes it doesnt make sence so i come on here to ask for help

evolutionmovement · Post by **evolutionmovement** » Mon Oct 04, 2004 4:13 am

FSMs are gold if you can find them. I've got the '91 set and '93 supplement. The torque specs alone are worth it.

For the cooling, you should have the alloy neck that goes to the upper radiator and to the heater off the back. You should also have a small metal jacket bolted to the engine that goes to the heater and to the water pump bypass IIRC. I think the alloy neck thing has fittings that run to the throttle body for heat, also.

Steve

J-MoNeY · Post by **J-MoNeY** » Mon Oct 04, 2004 4:36 am

Let me clarify. I actually lost my old manual, but thanks to a little time searching around here I finally found the PDF's. Sorry bout that guys.

THAWA · Post by **THAWA** » Mon Oct 04, 2004 5:53 am

haynes is a waste of money.

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

Engine Pics

Engine Pics