fuel pressure variances between cylinders?

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
boostjunkie
Knowledgeable
Knowledgeable
Posts: 1770
Joined: Mon Dec 16, 2002 3:20 pm
Location: Owings Mills, MD
Contact:

fuel pressure variances between cylinders?

Post by boostjunkie »

I was just wondering whether the ej22t motors suffer from the same fuel starvation issues as the 2.5s? Would it be beneficial to do that parallel fuel rail mod on the manifold?
[url=http://www.angelfire.com/md3/91turbolegacy/images/On_the_Lawn.jpg]1991 Legacy Turbo (RIP)[/url]

[url=http://www.angelfire.com/md3/91turbolegacy/images/Summer_Car_Wash3.jpg]2000 Celica GT-S[/url]
Aaron's ej22t
Second Gear
Posts: 266
Joined: Wed Oct 16, 2002 6:57 am
Location: North Bend, Wa

Post by Aaron's ej22t »

All subaru motors do. it is because the fuel delivery is in Series and not parallel. right now, each cylinder does not get the exact same amount of fuel.
so yes, it would be beneficial.
92 Legacy Turbo \ 5MT \ Silver
Legacy777
Site Admin
Site Admin
Posts: 27930
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Post by Legacy777 »

I would only look at doin this if you are lookin to go above 300 hp
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Post Reply