mating surfaces/ engine block?

race_to_live · Post by **race_to_live** » Fri Dec 11, 2009 1:01 pm

I know I saw someone talking about putting their block together and asking questions about adhesives and such. can someone send me in the right direction. If not, what do I use when putting the two halfs together? Or do I use anything?

EDIT: I don't have the torque specs or sequence for the block. I only have them for the heads. Can I get a link please. THANKS

kleinkid · Post by **kleinkid** » Fri Dec 11, 2009 6:03 pm

Check this out. Subaru manual says to use Three Bond 1215

http://www.main.experiencetherave.com/s ... alants.gif

206er · Post by **206er** » Sat Dec 12, 2009 8:13 am

google yamabond
its a yamaha product for applications like this and it is bad ass. just don't get it on your hands.

93forestpearl · Post by **93forestpearl** » Sat Dec 12, 2009 8:58 am

I've used Permatex Ultra Grey a few times without issue.

race_to_live · Post by **race_to_live** » Mon Dec 14, 2009 6:52 am

kleinkid · Post by **kleinkid** » Mon Dec 14, 2009 7:25 am

Your question has been answered. Subaru says to use Threebond 1215 sealant for the block halves. Locktite and 3M both have equivalants listed in the chart.

race_to_live · Post by **race_to_live** » Mon Dec 14, 2009 9:11 am

My bad I should have said that I edited the post. I need the torque specs for putting the block together.

93forestpearl · Post by **93forestpearl** » Mon Dec 14, 2009 4:39 pm

http://bbs.legacycentral.org/viewtopic.php?t=14485

Go to this page, download the service manual, and go to page 88.

kleinkid · Post by **kleinkid** » Mon Dec 14, 2009 5:40 pm

Oops, I didn't notice you had edited for more info.

Dan's reference will have it for you.

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

mating surfaces/ engine block?

mating surfaces/ engine block?

bump?