Well just fitted my eibach springs to low. car is good deal lower ,bilstien are lovely and the whiteline 20mm roll ball is great.i might put the old ones back on. or might try the whiteline select !
<http://rd.yahoo.com/M=176325.1312152.29 ... yahoo.com/>
www.
<http://us.adserver.yahoo.com/l?M=176325 ... =721831515>
To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
springs
Moderators: Helpinators, Moderators
-
dfullerton
Springs
H&R sell springs in the UK that they say will lower a legacy turbo 25mm. anyone tried them ?
<http://rd.yahoo.com/M=168002.1291681.28 ... bn=dvd4685> Click for Details
Click for Details
<http://us.adserver.yahoo.com/l?M=168002 ... =823319321>
To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
<http://rd.yahoo.com/M=168002.1291681.28 ... bn=dvd4685> Click for Details
Click for Details
<http://us.adserver.yahoo.com/l?M=168002 ... =823319321>
To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
-
Dave C
Springs
I've never heard of them, all the H&R stuff i've seen is at least
1.5". Whiteline has some Legacy springs that lower about 1" or so,
and they're pretty cheap too, if not baby blue.
--- In BC-BFLegacyWorks@y..., "dfullerton" <dfullerton@d...> wrote:
> H&R sell springs in the UK that they say will lower a legacy turbo
25mm. anyone tried them ?
------------------------ ---------------------~-~>
Make good on the promise you made at graduation to keep
in touch. Classmates.com has over 14 million registered
high school alumni--chances are you'll find your friends!
http://us.click.yahoo.com/n4HqaC/DMUCAA ... /X7OVlB/TM
---------------------------------------------------------------------_->
To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
1.5". Whiteline has some Legacy springs that lower about 1" or so,
and they're pretty cheap too, if not baby blue.
--- In BC-BFLegacyWorks@y..., "dfullerton" <dfullerton@d...> wrote:
> H&R sell springs in the UK that they say will lower a legacy turbo
25mm. anyone tried them ?
------------------------ ---------------------~-~>
Make good on the promise you made at graduation to keep
in touch. Classmates.com has over 14 million registered
high school alumni--chances are you'll find your friends!
http://us.click.yahoo.com/n4HqaC/DMUCAA ... /X7OVlB/TM
---------------------------------------------------------------------_->
To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
dfullerton
Springs
yeah i might go for the whitelines !
----- Original Message -----
From: "Dave C" <legacycentral@yahoo.com>
To: <BC-BFLegacyWorks@yahoogroups.com>
Sent: Tuesday, March 20, 2001 9:44 PM
Subject: [BC-BFLegacyWorks] Re: Springs
> I've never heard of them, all the H&R stuff i've seen is at least
> 1.5". Whiteline has some Legacy springs that lower about 1" or so,
> and they're pretty cheap too, if not baby blue.
>
> --- In BC-BFLegacyWorks@y..., "dfullerton" <dfullerton@d...> wrote:
> > H&R sell springs in the UK that they say will lower a legacy turbo
> 25mm. anyone tried them ?
>
>
>
> To unsubscribe from this group, send an email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
>
>
>
------------------------ ---------------------~-~>
Make good on the promise you made at graduation to keep
in touch. Classmates.com has over 14 million registered
high school alumni--chances are you'll find your friends!
http://us.click.yahoo.com/n4HqaC/DMUCAA ... /X7OVlB/TM
---------------------------------------------------------------------_->
To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
----- Original Message -----
From: "Dave C" <legacycentral@yahoo.com>
To: <BC-BFLegacyWorks@yahoogroups.com>
Sent: Tuesday, March 20, 2001 9:44 PM
Subject: [BC-BFLegacyWorks] Re: Springs
> I've never heard of them, all the H&R stuff i've seen is at least
> 1.5". Whiteline has some Legacy springs that lower about 1" or so,
> and they're pretty cheap too, if not baby blue.
>
> --- In BC-BFLegacyWorks@y..., "dfullerton" <dfullerton@d...> wrote:
> > H&R sell springs in the UK that they say will lower a legacy turbo
> 25mm. anyone tried them ?
>
>
>
> To unsubscribe from this group, send an email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
>
>
>
------------------------ ---------------------~-~>
Make good on the promise you made at graduation to keep
in touch. Classmates.com has over 14 million registered
high school alumni--chances are you'll find your friends!
http://us.click.yahoo.com/n4HqaC/DMUCAA ... /X7OVlB/TM
---------------------------------------------------------------------_->
To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
Ricky
Springs
I saw on tirerack website that H&R does indeed make springs for our
car and lowers the front 1 inch and rear 1.25inch.
--- In BC-BFLegacyWorks@y..., "dfullerton" <dfullerton@d...> wrote:
> yeah i might go for the whitelines !
> ----- Original Message -----
> From: "Dave C" <legacycentral@y...>
> To: <BC-BFLegacyWorks@y...>
> Sent: Tuesday, March 20, 2001 9:44 PM
> Subject: [BC-BFLegacyWorks] Re: Springs
>
>
> > I've never heard of them, all the H&R stuff i've seen is at least
> > 1.5". Whiteline has some Legacy springs that lower about 1" or
so,
> > and they're pretty cheap too, if not baby blue.
> >
> > --- In BC-BFLegacyWorks@y..., "dfullerton" <dfullerton@d...>
wrote:
> > > H&R sell springs in the UK that they say will lower a legacy
turbo
> > 25mm. anyone tried them ?
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > BC-BFLegacyWorks-unsubscribe@egroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
------------------------ ---------------------~-~>
Make good on the promise you made at graduation to keep
in touch. Classmates.com has over 14 million registered
high school alumni--chances are you'll find your friends!
http://us.click.yahoo.com/n4HqaC/DMUCAA ... /X7OVlB/TM
---------------------------------------------------------------------_->
To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
car and lowers the front 1 inch and rear 1.25inch.
--- In BC-BFLegacyWorks@y..., "dfullerton" <dfullerton@d...> wrote:
> yeah i might go for the whitelines !
> ----- Original Message -----
> From: "Dave C" <legacycentral@y...>
> To: <BC-BFLegacyWorks@y...>
> Sent: Tuesday, March 20, 2001 9:44 PM
> Subject: [BC-BFLegacyWorks] Re: Springs
>
>
> > I've never heard of them, all the H&R stuff i've seen is at least
> > 1.5". Whiteline has some Legacy springs that lower about 1" or
so,
> > and they're pretty cheap too, if not baby blue.
> >
> > --- In BC-BFLegacyWorks@y..., "dfullerton" <dfullerton@d...>
wrote:
> > > H&R sell springs in the UK that they say will lower a legacy
turbo
> > 25mm. anyone tried them ?
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > BC-BFLegacyWorks-unsubscribe@egroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
------------------------ ---------------------~-~>
Make good on the promise you made at graduation to keep
in touch. Classmates.com has over 14 million registered
high school alumni--chances are you'll find your friends!
http://us.click.yahoo.com/n4HqaC/DMUCAA ... /X7OVlB/TM
---------------------------------------------------------------------_->
To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
Shariff@LightningEliminat
Springs
I have the H&R springs with V5 struts. It lowers the car about an 1"
(25.4mm) ~ 1.25"(31.75mm). Much stiffer, but it is grey. Not yellow
or blue
--- In BC-BFLegacyWorks@y..., "Ricky" <prostho@n...> wrote:
> I saw on tirerack website that H&R does indeed make springs for our
> car and lowers the front 1 inch and rear 1.25inch.
------------------------ ---------------------~-~>
Make good on the promise you made at graduation to keep
in touch. Classmates.com has over 14 million registered
high school alumni--chances are you'll find your friends!
http://us.click.yahoo.com/n4HqaC/DMUCAA ... /X7OVlB/TM
---------------------------------------------------------------------_->
To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
(25.4mm) ~ 1.25"(31.75mm). Much stiffer, but it is grey. Not yellow
or blue
--- In BC-BFLegacyWorks@y..., "Ricky" <prostho@n...> wrote:
> I saw on tirerack website that H&R does indeed make springs for our
> car and lowers the front 1 inch and rear 1.25inch.
------------------------ ---------------------~-~>
Make good on the promise you made at graduation to keep
in touch. Classmates.com has over 14 million registered
high school alumni--chances are you'll find your friends!
http://us.click.yahoo.com/n4HqaC/DMUCAA ... /X7OVlB/TM
---------------------------------------------------------------------_->
To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
Jay Erlenbach
Springs
What are the V5 struts? Are they STi version 5? or
something different?
Jay
92 Legacy Turbo Sedan
--- Shariff@LightningEliminators.com wrote:
> I have the H&R springs with V5 struts. It lowers
> the car about an 1"
> (25.4mm) ~ 1.25"(31.75mm). Much stiffer, but it is
> grey. Not yellow
> or blue
>
> --- In BC-BFLegacyWorks@y..., "Ricky" <prostho@n...>
> wrote:
> > I saw on tirerack website that H&R does indeed
> make springs for our
> > car and lowers the front 1 inch and rear 1.25inch.
>
>
>
__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/
------------------------ ---------------------~-~>
Make good on the promise you made at graduation to keep
in touch. Classmates.com has over 14 million registered
high school alumni--chances are you'll find your friends!
http://us.click.yahoo.com/n4HqaC/DMUCAA ... /X7OVlB/TM
---------------------------------------------------------------------_->
To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
something different?
Jay
92 Legacy Turbo Sedan
--- Shariff@LightningEliminators.com wrote:
> I have the H&R springs with V5 struts. It lowers
> the car about an 1"
> (25.4mm) ~ 1.25"(31.75mm). Much stiffer, but it is
> grey. Not yellow
> or blue
>
> --- In BC-BFLegacyWorks@y..., "Ricky" <prostho@n...>
> wrote:
> > I saw on tirerack website that H&R does indeed
> make springs for our
> > car and lowers the front 1 inch and rear 1.25inch.
>
>
>
__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/
------------------------ ---------------------~-~>
Make good on the promise you made at graduation to keep
in touch. Classmates.com has over 14 million registered
high school alumni--chances are you'll find your friends!
http://us.click.yahoo.com/n4HqaC/DMUCAA ... /X7OVlB/TM
---------------------------------------------------------------------_->
To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
Shariff@LightningEliminat
Springs
Jay, it is the STi Ver 5 Struts. I was being lazy.
--- In BC-BFLegacyWorks@y..., Jay Erlenbach <legacy_productions@y...>
wrote:
> What are the V5 struts? Are they STi version 5? or
> something different?
>
> Jay
> 92 Legacy Turbo Sedan
------------------------ ---------------------~-~>
Make good on the promise you made at graduation to keep
in touch. Classmates.com has over 14 million registered
high school alumni--chances are you'll find your friends!
http://us.click.yahoo.com/n4HqaC/DMUCAA ... /X7OVlB/TM
---------------------------------------------------------------------_->
To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
--- In BC-BFLegacyWorks@y..., Jay Erlenbach <legacy_productions@y...>
wrote:
> What are the V5 struts? Are they STi version 5? or
> something different?
>
> Jay
> 92 Legacy Turbo Sedan
------------------------ ---------------------~-~>
Make good on the promise you made at graduation to keep
in touch. Classmates.com has over 14 million registered
high school alumni--chances are you'll find your friends!
http://us.click.yahoo.com/n4HqaC/DMUCAA ... /X7OVlB/TM
---------------------------------------------------------------------_->
To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
Jay Erlenbach
Springs
How do those work for you? Do you notice any poor
damper or rebound? Or do they work well for the weight
of the legacy?
--- Shariff@LightningEliminators.com wrote:
> Jay, it is the STi Ver 5 Struts. I was being lazy.
>
> --- In BC-BFLegacyWorks@y..., Jay Erlenbach
> <legacy_productions@y...>
> wrote:
> > What are the V5 struts? Are they STi version 5? or
> > something different?
> >
> > Jay
> > 92 Legacy Turbo Sedan
>
>
>
__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/
------------------------ ---------------------~-~>
We give away $70,000 a month! Come to iWin.com for
your chance to win!
http://us.click.yahoo.com/olMXHC/BJVCAA ... /X7OVlB/TM
---------------------------------------------------------------------_->
To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
damper or rebound? Or do they work well for the weight
of the legacy?
--- Shariff@LightningEliminators.com wrote:
> Jay, it is the STi Ver 5 Struts. I was being lazy.
>
> --- In BC-BFLegacyWorks@y..., Jay Erlenbach
> <legacy_productions@y...>
> wrote:
> > What are the V5 struts? Are they STi version 5? or
> > something different?
> >
> > Jay
> > 92 Legacy Turbo Sedan
>
>
>
__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/
------------------------ ---------------------~-~>
We give away $70,000 a month! Come to iWin.com for
your chance to win!
http://us.click.yahoo.com/olMXHC/BJVCAA ... /X7OVlB/TM
---------------------------------------------------------------------_->
To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
Shariff@LightningEliminat
Springs
For the surfaces I have driven so far, I really like it. The setup
may not work with a wagon, but on a sedan it feels better than
stock. But the stock struts I had were leaking so I really can't
compare it.
No sloppiness (?) felt. Something I was anticipating before the
install.
------------------------ ---------------------~-~>
Make good on the promise you made at graduation to keep
in touch. Classmates.com has over 14 million registered
high school alumni--chances are you'll find your friends!
http://us.click.yahoo.com/03IJGA/DMUCAA ... /X7OVlB/TM
---------------------------------------------------------------------_->
To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
may not work with a wagon, but on a sedan it feels better than
stock. But the stock struts I had were leaking so I really can't
compare it.
No sloppiness (?) felt. Something I was anticipating before the
install.
------------------------ ---------------------~-~>
Make good on the promise you made at graduation to keep
in touch. Classmates.com has over 14 million registered
high school alumni--chances are you'll find your friends!
http://us.click.yahoo.com/03IJGA/DMUCAA ... /X7OVlB/TM
---------------------------------------------------------------------_->
To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
dfullerton
springs
ok i found a place here in the uk that will make 4 springs to order, any hight %25 uprated ,what they need to know is if the rear springs, are straight all they way up or conical.
<http://rd.yahoo.com/M=168002.1291681.28 ... bn=dvd4684> Click for Details
Click for Details
<http://us.adserver.yahoo.com/l?M=168002 ... =915434522>
To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
<http://rd.yahoo.com/M=168002.1291681.28 ... bn=dvd4684> Click for Details
Click for Details
<http://us.adserver.yahoo.com/l?M=168002 ... =915434522>
To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
-
Josh Colombo
springs
To the best of my knowledge they are conical. At least on the FWD models, I would assume AWD to be the same, just a tad stiffer spring & rate
-----Original Message-----
From: dfullerton
Sent: Thu 3/22/2001 2:46 PM
To: BC-BFLegacyWorks@yahoogroups.com
Cc:
Subject: [BC-BFLegacyWorks] springs
ok i found a place here in the uk that will make 4 springs to order, any hight %25 uprated ,what they need to know is if the rear springs, are straight all they way up or conical.
-----Original Message-----
From: dfullerton
Sent: Thu 3/22/2001 2:46 PM
To: BC-BFLegacyWorks@yahoogroups.com
Cc:
Subject: [BC-BFLegacyWorks] springs
ok i found a place here in the uk that will make 4 springs to order, any hight %25 uprated ,what they need to know is if the rear springs, are straight all they way up or conical.
-
dfullerton
springs
Any one else like to give some opinion
----- Original Message -----
From: "Josh Colombo" <jcc189@psu.edu>
To: <BC-BFLegacyWorks@yahoogroups.com>
Sent: Thursday, March 22, 2001 8:10 PM
Subject: RE: [BC-BFLegacyWorks] springs
> To the best of my knowledge they are conical. At least on the FWD
> models, I would assume AWD to be the same, just a tad stiffer spring &
> rate
>
>
> -----Original Message-----
> From: dfullerton
> Sent: Thu 3/22/2001 2:46 PM
> To: BC-BFLegacyWorks@yahoogroups.com
> Cc:
> Subject: [BC-BFLegacyWorks] springs
>
> ok i found a place here in the uk that will make 4 springs to order, any
> hight %25 uprated ,what they need to know is if the rear springs, are
> straight all they way up or conical.
>
>
>
>
>
> To unsubscribe from this group, send an email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
>
>
>
------------------------ ---------------------~-~>
Get great low international calling rates
from Net2Phone! Click Here!
http://us.click.yahoo.com/fBRVBB/kJXCAA ... /X7OVlB/TM
---------------------------------------------------------------------_->
To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
----- Original Message -----
From: "Josh Colombo" <jcc189@psu.edu>
To: <BC-BFLegacyWorks@yahoogroups.com>
Sent: Thursday, March 22, 2001 8:10 PM
Subject: RE: [BC-BFLegacyWorks] springs
> To the best of my knowledge they are conical. At least on the FWD
> models, I would assume AWD to be the same, just a tad stiffer spring &
> rate
>
>
> -----Original Message-----
> From: dfullerton
> Sent: Thu 3/22/2001 2:46 PM
> To: BC-BFLegacyWorks@yahoogroups.com
> Cc:
> Subject: [BC-BFLegacyWorks] springs
>
> ok i found a place here in the uk that will make 4 springs to order, any
> hight %25 uprated ,what they need to know is if the rear springs, are
> straight all they way up or conical.
>
>
>
>
>
> To unsubscribe from this group, send an email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
>
>
>
------------------------ ---------------------~-~>
Get great low international calling rates
from Net2Phone! Click Here!
http://us.click.yahoo.com/fBRVBB/kJXCAA ... /X7OVlB/TM
---------------------------------------------------------------------_->
To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
Doug Hancock
Springs
I have just bought some springs to lower my liberty 1.5". Its front wheel drive. Question. Do I need to get a camber kit for the front or the back or will the original camber adjustments work fine.
ADVERTISEMENT
<http://rd.yahoo.com/M=213858.1737107.32 ... .tf?s=5085>
<http://us.adserver.yahoo.com/l?M=213858 ... =646545712>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
ADVERTISEMENT
<http://rd.yahoo.com/M=213858.1737107.32 ... .tf?s=5085>
<http://us.adserver.yahoo.com/l?M=213858 ... =646545712>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
-
georgerbyrne@yahoo.com
Springs
It'll be fine like it is. Got my FWD liberty lowered a coupla months
ago. Don't need any extra kits, just the lowered springs.
Obviousely your in Australia, where you from?
I'm a Brisbane boy.
If you want to talk to other Australian guys come to
http://pub5.ezboard.com/bthebackyardboyssubaru
They will be able to answer any questions about anything you could
ever want to do to your liberty.
George Aust.
--- In BC-BFLegacyWorks@y..., "Doug Hancock" <Doug_hancock@o...>
wrote:
> [BC-BFLegacyWorks] bad handling?I have just bought some springs to
lower my
> liberty 1.5". Its front wheel drive. Question. Do I need to get a
camber kit
> for the front or the back or will the original camber adjustments
work fine.
------------------------ ---------------------~-->
Universal Inkjet Refill Kit $29.95
Refill any ink cartridge for less!
Includes black and color ink.
http://us.click.yahoo.com/XwUZwC/MkNDAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
ago. Don't need any extra kits, just the lowered springs.
Obviousely your in Australia, where you from?
I'm a Brisbane boy.
If you want to talk to other Australian guys come to
http://pub5.ezboard.com/bthebackyardboyssubaru
They will be able to answer any questions about anything you could
ever want to do to your liberty.
George Aust.
--- In BC-BFLegacyWorks@y..., "Doug Hancock" <Doug_hancock@o...>
wrote:
> [BC-BFLegacyWorks] bad handling?I have just bought some springs to
lower my
> liberty 1.5". Its front wheel drive. Question. Do I need to get a
camber kit
> for the front or the back or will the original camber adjustments
work fine.
------------------------ ---------------------~-->
Universal Inkjet Refill Kit $29.95
Refill any ink cartridge for less!
Includes black and color ink.
http://us.click.yahoo.com/XwUZwC/MkNDAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
georgerbyrne@yahoo.com
Springs
Nope got my liberty lowered a couple of months ago. Just need the
springs nothing else, no kits, big improvement
George Aust.
--- In BC-BFLegacyWorks@y..., "Doug Hancock" <Doug_hancock@o...>
wrote:
> [BC-BFLegacyWorks] bad handling?I have just bought some springs to
lower my
> liberty 1.5". Its front wheel drive. Question. Do I need to get a
camber kit
> for the front or the back or will the original camber adjustments
work fine.
------------------------ ---------------------~-->
Universal Inkjet Refill Kit $29.95
Refill any ink cartridge for less!
Includes black and color ink.
http://us.click.yahoo.com/bAmslD/MkNDAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
springs nothing else, no kits, big improvement
George Aust.
--- In BC-BFLegacyWorks@y..., "Doug Hancock" <Doug_hancock@o...>
wrote:
> [BC-BFLegacyWorks] bad handling?I have just bought some springs to
lower my
> liberty 1.5". Its front wheel drive. Question. Do I need to get a
camber kit
> for the front or the back or will the original camber adjustments
work fine.
------------------------ ---------------------~-->
Universal Inkjet Refill Kit $29.95
Refill any ink cartridge for less!
Includes black and color ink.
http://us.click.yahoo.com/bAmslD/MkNDAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
Rod Grosvenor
Springs
Doug-Lowering 1.5" won`t change your stock alignment specs at all. I did the same mod with KYB struts & what a difference in handling! Enjoy---ROD (AZ.)
----- Original Message -----
From: Doug Hancock <mailto:Doug_hancock@optusnet.com.au>
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Thursday, November 15, 2001 3:56 AM
Subject: [BC-BFLegacyWorks] Springs
I have just bought some springs to lower my liberty 1.5". Its front wheel drive. Question. Do I need to get a camber kit for the front or the back or will the original camber adjustments work fine.
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
ADVERTISEMENT
<http://rd.yahoo.com/M=213858.1737107.32 ... .tf?s=5085>
<http://us.adserver.yahoo.com/l?M=213858 ... =410151737>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
----- Original Message -----
From: Doug Hancock <mailto:Doug_hancock@optusnet.com.au>
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Thursday, November 15, 2001 3:56 AM
Subject: [BC-BFLegacyWorks] Springs
I have just bought some springs to lower my liberty 1.5". Its front wheel drive. Question. Do I need to get a camber kit for the front or the back or will the original camber adjustments work fine.
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
ADVERTISEMENT
<http://rd.yahoo.com/M=213858.1737107.32 ... .tf?s=5085>
<http://us.adserver.yahoo.com/l?M=213858 ... =410151737>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
-
Doug Hancock
Springs
Im from Newcastle and thanks I will go have alook.
-----Original Message-----
From: georgerbyrne@yahoo.com [mailto:georgerbyrne@yahoo.com]
Sent: Thursday, 15 November 2001 11:58 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] Re: Springs
It'll be fine like it is. Got my FWD liberty lowered a coupla months
ago. Don't need any extra kits, just the lowered springs.
Obviousely your in Australia, where you from?
I'm a Brisbane boy.
If you want to talk to other Australian guys come to
http://pub5.ezboard.com/bthebackyardboyssubaru
They will be able to answer any questions about anything you could
ever want to do to your liberty.
George Aust.
--- In BC-BFLegacyWorks@y..., "Doug Hancock" <Doug_hancock@o...>
wrote:
> [BC-BFLegacyWorks] bad handling?I have just bought some springs to
lower my
> liberty 1.5". Its front wheel drive. Question. Do I need to get a
camber kit
> for the front or the back or will the original camber adjustments
work fine.
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
------------------------ ---------------------~-->
Quit now for Great
American Smokeout
http://us.click.yahoo.com/B0gGED/9pSDAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-----Original Message-----
From: georgerbyrne@yahoo.com [mailto:georgerbyrne@yahoo.com]
Sent: Thursday, 15 November 2001 11:58 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] Re: Springs
It'll be fine like it is. Got my FWD liberty lowered a coupla months
ago. Don't need any extra kits, just the lowered springs.
Obviousely your in Australia, where you from?
I'm a Brisbane boy.
If you want to talk to other Australian guys come to
http://pub5.ezboard.com/bthebackyardboyssubaru
They will be able to answer any questions about anything you could
ever want to do to your liberty.
George Aust.
--- In BC-BFLegacyWorks@y..., "Doug Hancock" <Doug_hancock@o...>
wrote:
> [BC-BFLegacyWorks] bad handling?I have just bought some springs to
lower my
> liberty 1.5". Its front wheel drive. Question. Do I need to get a
camber kit
> for the front or the back or will the original camber adjustments
work fine.
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
------------------------ ---------------------~-->
Quit now for Great
American Smokeout
http://us.click.yahoo.com/B0gGED/9pSDAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
shemeryahu
Springs
Which companies produce springs for the FWD models? So far, I have
only found support for the AWD models
------------------------ ---------------------~-->
Access Your PC from Anywhere
It's Easy. It's Fun. - Free Download.
http://us.click.yahoo.com/kmECdA/7XkDAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
only found support for the AWD models
------------------------ ---------------------~-->
Access Your PC from Anywhere
It's Easy. It's Fun. - Free Download.
http://us.click.yahoo.com/kmECdA/7XkDAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
Doug Hancock
Springs
Go for King Springs. You will have to check the rear as there is 2 sizes. 1
size is for the RS. Lovels are no where near the quality for the subi.
-----Original Message-----
From: shemeryahu [mailto:shemeryahu@yahoo.com]
Sent: Saturday, 30 March 2002 92 AM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] Springs
Which companies produce springs for the FWD models? So far, I have
only found support for the AWD models
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
------------------------ ---------------------~-->
Access Your PC from Anywhere
Check Email & Transfer files - Free Download
http://us.click.yahoo.com/omECdA/3XkDAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
size is for the RS. Lovels are no where near the quality for the subi.
-----Original Message-----
From: shemeryahu [mailto:shemeryahu@yahoo.com]
Sent: Saturday, 30 March 2002 92 AM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] Springs
Which companies produce springs for the FWD models? So far, I have
only found support for the AWD models
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
------------------------ ---------------------~-->
Access Your PC from Anywhere
Check Email & Transfer files - Free Download
http://us.click.yahoo.com/omECdA/3XkDAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
Josh Colombo
Springs
To my knowledge, Whiteline is the only company that has springs that have been designed for the FWD models. I have a FWD as well. I will probably be seriously looking into getting these springs some time this summer.
I know Teague's Auto carries the springs. You might be able to find them cheaper some place else. Check out some of the vendor info on my site www.surrealmirage.com/subaru
Josh
************************************
Josh Colombo
Josh@surrealmirage.com <mailto:Josh@surrealmirage.com> **NEW**
"Life, an ever-changing melody
of beats and rhythm" - ME
************************************
-----Original Message-----
From: shemeryahu [mailto:shemeryahu@yahoo.com]
Sent: Friday, March 29, 2002 42 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] Springs
Which companies produce springs for the FWD models? So far, I have
only found support for the AWD models
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
------------------------ ---------------------~-->
Access Your PC from Anywhere
It's Easy. It's Fun. - Free Download.
http://us.click.yahoo.com/kmECdA/7XkDAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
I know Teague's Auto carries the springs. You might be able to find them cheaper some place else. Check out some of the vendor info on my site www.surrealmirage.com/subaru
Josh
************************************
Josh Colombo
Josh@surrealmirage.com <mailto:Josh@surrealmirage.com> **NEW**
"Life, an ever-changing melody
of beats and rhythm" - ME
************************************
-----Original Message-----
From: shemeryahu [mailto:shemeryahu@yahoo.com]
Sent: Friday, March 29, 2002 42 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] Springs
Which companies produce springs for the FWD models? So far, I have
only found support for the AWD models
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
------------------------ ---------------------~-->
Access Your PC from Anywhere
It's Easy. It's Fun. - Free Download.
http://us.click.yahoo.com/kmECdA/7XkDAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
Z1Auto@aol.com
Springs
Having just bought my Legacy, I am gathering parts this week as a some basic
upgrades..have a few questions:
1. Suspension - is tehre a Legacy Turbo specific part number for KYB struts,
or do I jsut use one for a 2.5RS/GC8? Are the AGX's worth the extra cash (I
am a dealer), or do they not work great on this car)..I know on many cars,
they are not valved too great, and are not really worth the extra cash (I
found my GVR4 to be like this).
2. Springs: aside from H&R, are there springs specifically for the Legacy
turbo (what is the chassis code again?) Can I use springs intended for a
Gc8? anyone have experience with Tein Springs for this car, or Eibach...we
are a dealer for both
3. Swaybars and strut braces: I figure Whiteline is the way to go for
swaybars, but want ones that are the best fitting (sometimes, Whitelines haev
minor fitment issues). How about strut braces? Will the front from a GC8
fit? How about the lower arm braces, like the Cusco Type 2 (the H shaped
one)...does it fit? I figured it would as the WRX model GC8 and Legacy Turbo
share a x-member, but just want to be sure
Thanks guys!
adam
Z-1 Performance
www.z1auto.com
------------------------ ---------------------~-->
Free $5 Love Reading
Risk Free!
http://us.click.yahoo.com/3PCXaC/PfREAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
upgrades..have a few questions:
1. Suspension - is tehre a Legacy Turbo specific part number for KYB struts,
or do I jsut use one for a 2.5RS/GC8? Are the AGX's worth the extra cash (I
am a dealer), or do they not work great on this car)..I know on many cars,
they are not valved too great, and are not really worth the extra cash (I
found my GVR4 to be like this).
2. Springs: aside from H&R, are there springs specifically for the Legacy
turbo (what is the chassis code again?) Can I use springs intended for a
Gc8? anyone have experience with Tein Springs for this car, or Eibach...we
are a dealer for both
3. Swaybars and strut braces: I figure Whiteline is the way to go for
swaybars, but want ones that are the best fitting (sometimes, Whitelines haev
minor fitment issues). How about strut braces? Will the front from a GC8
fit? How about the lower arm braces, like the Cusco Type 2 (the H shaped
one)...does it fit? I figured it would as the WRX model GC8 and Legacy Turbo
share a x-member, but just want to be sure
Thanks guys!
adam
Z-1 Performance
www.z1auto.com
------------------------ ---------------------~-->
Free $5 Love Reading
Risk Free!
http://us.click.yahoo.com/3PCXaC/PfREAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
Adam Archibald
Springs
I have my legacy turbo running KYB AGX struts paired with whiteline legacy
select springs (these are one of the few springs made for our car). The
setup works very well and i have no complaints as of yet. Was also pleased
with the amount the springs lowered my car. Only about 1-1.5 inches, just
enought to make it look better and get it a little closer to the ground for
handling but not enough to be scared of monster speed bumps.
my 2 cents...
-Adam
> Having just bought my Legacy, I am gathering parts this week as a some
> basic upgrades..have a few questions:
>
> 1. Suspension - is tehre a Legacy Turbo specific part number for KYB
> struts, or do I jsut use one for a 2.5RS/GC8? Are the AGX's worth the
> extra cash (I am a dealer), or do they not work great on this car)..I
> know on many cars, they are not valved too great, and are not really
> worth the extra cash (I found my GVR4 to be like this).
>
> 2. Springs: aside from H&R, are there springs specifically for the
> Legacy turbo (what is the chassis code again?) Can I use springs
> intended for a Gc8? anyone have experience with Tein Springs for this
> car, or Eibach...we are a dealer for both
>
> 3. Swaybars and strut braces: I figure Whiteline is the way to go for
> swaybars, but want ones that are the best fitting (sometimes,
> Whitelines haev minor fitment issues). How about strut braces? Will
> the front from a GC8 fit? How about the lower arm braces, like the
> Cusco Type 2 (the H shaped one)...does it fit? I figured it would as
> the WRX model GC8 and Legacy Turbo share a x-member, but just want to
> be sure
>
> Thanks guys!
>
> adam
> Z-1 Performance
> www.z1auto.com
>
> ------------------------
> ---------------------~--> Free $5 Love Reading
> Risk Free!
> http://us.click.yahoo.com/3PCXaC/PfREAA ... /XoTolB/TM
> ---------------------------------------------------------------------~->
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
------------------------ ---------------------~-->
Free $5 Love Reading
Risk Free!
http://us.click.yahoo.com/3PCXaC/PfREAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
select springs (these are one of the few springs made for our car). The
setup works very well and i have no complaints as of yet. Was also pleased
with the amount the springs lowered my car. Only about 1-1.5 inches, just
enought to make it look better and get it a little closer to the ground for
handling but not enough to be scared of monster speed bumps.
my 2 cents...
-Adam
> Having just bought my Legacy, I am gathering parts this week as a some
> basic upgrades..have a few questions:
>
> 1. Suspension - is tehre a Legacy Turbo specific part number for KYB
> struts, or do I jsut use one for a 2.5RS/GC8? Are the AGX's worth the
> extra cash (I am a dealer), or do they not work great on this car)..I
> know on many cars, they are not valved too great, and are not really
> worth the extra cash (I found my GVR4 to be like this).
>
> 2. Springs: aside from H&R, are there springs specifically for the
> Legacy turbo (what is the chassis code again?) Can I use springs
> intended for a Gc8? anyone have experience with Tein Springs for this
> car, or Eibach...we are a dealer for both
>
> 3. Swaybars and strut braces: I figure Whiteline is the way to go for
> swaybars, but want ones that are the best fitting (sometimes,
> Whitelines haev minor fitment issues). How about strut braces? Will
> the front from a GC8 fit? How about the lower arm braces, like the
> Cusco Type 2 (the H shaped one)...does it fit? I figured it would as
> the WRX model GC8 and Legacy Turbo share a x-member, but just want to
> be sure
>
> Thanks guys!
>
> adam
> Z-1 Performance
> www.z1auto.com
>
> ------------------------
> ---------------------~--> Free $5 Love Reading
> Risk Free!
> http://us.click.yahoo.com/3PCXaC/PfREAA ... /XoTolB/TM
> ---------------------------------------------------------------------~->
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
------------------------ ---------------------~-->
Free $5 Love Reading
Risk Free!
http://us.click.yahoo.com/3PCXaC/PfREAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
Josh Colombo
Springs
Adam,
Question I have for you is what dampin do you run.....did you crank the valving closed a little bit.....or how have you setup your struts to match the whiteline springs?
Thanks
Josh
-----Original Message-----
From: Adam Archibald [mailto:adam@mymindseye.ca]
Sent: Thu 6/20/2002 9:52 AM
To: BC-BFLegacyWorks@yahoogroups.com
Cc:
Subject: Re: [BC-BFLegacyWorks] Re: [BC-BFLegacyWorks - Springs
I have my legacy turbo running KYB AGX struts paired with whiteline legacy
select springs (these are one of the few springs made for our car). The
setup works very well and i have no complaints as of yet. Was also pleased
with the amount the springs lowered my car. Only about 1-1.5 inches, just
enought to make it look better and get it a little closer to the ground for
handling but not enough to be scared of monster speed bumps.
my 2 cents...
-Adam
> Having just bought my Legacy, I am gathering parts this week as a some
> basic upgrades..have a few questions:
>
> 1. Suspension - is tehre a Legacy Turbo specific part number for KYB
> struts, or do I jsut use one for a 2.5RS/GC8? Are the AGX's worth the
> extra cash (I am a dealer), or do they not work great on this car)..I
> know on many cars, they are not valved too great, and are not really
> worth the extra cash (I found my GVR4 to be like this).
>
> 2. Springs: aside from H&R, are there springs specifically for the
> Legacy turbo (what is the chassis code again?) Can I use springs
> intended for a Gc8? anyone have experience with Tein Springs for this
> car, or Eibach...we are a dealer for both
>
> 3. Swaybars and strut braces: I figure Whiteline is the way to go for
> swaybars, but want ones that are the best fitting (sometimes,
> Whitelines haev minor fitment issues). How about strut braces? Will
> the front from a GC8 fit? How about the lower arm braces, like the
> Cusco Type 2 (the H shaped one)...does it fit? I figured it would as
> the WRX model GC8 and Legacy Turbo share a x-member, but just want to
> be sure
>
> Thanks guys!
>
> adam
> Z-1 Performance
> www.z1auto.com
>
> ------------------------
> ---------------------~--> Free $5 Love Reading
> Risk Free!
> http://us.click.yahoo.com/3PCXaC/PfREAA ... /XoTolB/TM
> ---------------------------------------------------------------------~->
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
------------------------ ---------------------~-->
Free $5 Love Reading
Risk Free!
http://us.click.yahoo.com/3PCXaC/PfREAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
Question I have for you is what dampin do you run.....did you crank the valving closed a little bit.....or how have you setup your struts to match the whiteline springs?
Thanks
Josh
-----Original Message-----
From: Adam Archibald [mailto:adam@mymindseye.ca]
Sent: Thu 6/20/2002 9:52 AM
To: BC-BFLegacyWorks@yahoogroups.com
Cc:
Subject: Re: [BC-BFLegacyWorks] Re: [BC-BFLegacyWorks - Springs
I have my legacy turbo running KYB AGX struts paired with whiteline legacy
select springs (these are one of the few springs made for our car). The
setup works very well and i have no complaints as of yet. Was also pleased
with the amount the springs lowered my car. Only about 1-1.5 inches, just
enought to make it look better and get it a little closer to the ground for
handling but not enough to be scared of monster speed bumps.
my 2 cents...
-Adam
> Having just bought my Legacy, I am gathering parts this week as a some
> basic upgrades..have a few questions:
>
> 1. Suspension - is tehre a Legacy Turbo specific part number for KYB
> struts, or do I jsut use one for a 2.5RS/GC8? Are the AGX's worth the
> extra cash (I am a dealer), or do they not work great on this car)..I
> know on many cars, they are not valved too great, and are not really
> worth the extra cash (I found my GVR4 to be like this).
>
> 2. Springs: aside from H&R, are there springs specifically for the
> Legacy turbo (what is the chassis code again?) Can I use springs
> intended for a Gc8? anyone have experience with Tein Springs for this
> car, or Eibach...we are a dealer for both
>
> 3. Swaybars and strut braces: I figure Whiteline is the way to go for
> swaybars, but want ones that are the best fitting (sometimes,
> Whitelines haev minor fitment issues). How about strut braces? Will
> the front from a GC8 fit? How about the lower arm braces, like the
> Cusco Type 2 (the H shaped one)...does it fit? I figured it would as
> the WRX model GC8 and Legacy Turbo share a x-member, but just want to
> be sure
>
> Thanks guys!
>
> adam
> Z-1 Performance
> www.z1auto.com
>
> ------------------------
> ---------------------~--> Free $5 Love Reading
> Risk Free!
> http://us.click.yahoo.com/3PCXaC/PfREAA ... /XoTolB/TM
> ---------------------------------------------------------------------~->
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
------------------------ ---------------------~-->
Free $5 Love Reading
Risk Free!
http://us.click.yahoo.com/3PCXaC/PfREAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
Z1Auto@aol.com
Springs
Adam - where did ytou get the AGX's? part number?
Adam
Z-1 Performance
www.z1auto.com
(631)254-8277
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
Adam
Z-1 Performance
www.z1auto.com
(631)254-8277
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .