heater hoses, where do they go

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
reecers
First Gear
Posts: 50
Joined: Fri Sep 23, 2011 5:40 pm

heater hoses, where do they go

Post by reecers »

Image

as you can see I have no heater hoses, and I have no idea where the hoses would go if I did have them. I bought a Chilton manual and it was no help and I have been searching frantically for some info but have found nothing... the heater core doesn't seem to leak so I don't know what the deal was. I bought the car this way.

Supposedly has a JDM EJ20 in it from what the previous owner said. Any help is much appreciated

1991 subaru legacy turbo sedan
Legacy777
Site Admin
Site Admin
Posts: 27931
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: heater hoses, where do they go

Post by Legacy777 »

The heater hose connections should be at the back driver's side of the engine. One will come off of the coolant crossover pipe and the other will come up and under the head from the pump.

Here's the full factory manual for the Aust. Liberty. It should have info on the cooling system and hoses in section 2.

http://www.main.experiencetherave.com/s ... SM_-_FULL/
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Post Reply