Does any one know how to check a MAF with out a scan tool?

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
jbirg
In Neutral
Posts: 3
Joined: Fri Jul 15, 2005 4:13 am
Location: md

Does any one know how to check a MAF with out a scan tool?

Post by jbirg »

My Ecu says the MAF sensor is abnormal but I'm not sure I wanna go buy a new one since i thinks this could be a symptom of something else. It also faults on the "air control valve". What is the air control valve and where is it and How do I check it?
Legacy777
Site Admin
Site Admin
Posts: 27932
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Post by Legacy777 »

First thing I'd suggest is to reset the ECU. Drive the car around and see what codes come back.

The air control valve is the idle air control valve.

Here's testing for the MAF sensor
http://www.main.experiencetherave.com:8 ... sting1.jpg
http://www.main.experiencetherave.com:8 ... sting2.jpg
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Post Reply