Headlights to tailights and everything in between.
Moderators: Helpinators , Moderators
theboyo19
In Neutral
Posts: 5 Joined: Wed Mar 21, 2007 1:11 am
Post
by theboyo19 Wed Mar 21, 2007 8:58 pm
so im doing an engine swap to get an ej22t out of an automatic 93..i was wondering if i need to change the ecu to run a manual tranny ? its going into my 95 BD
MPtyza
Second Gear
Posts: 331 Joined: Wed Dec 15, 2004 8:00 pmLocation: Telford, PA
Post
by MPtyza Wed Mar 21, 2007 11:16 pm
You can use the same ECU, the only difference between manual and auto is that the autos had a TCU, but the ECU is exactly the same for the EJ22T
-Mike
555BCTurbo
Knowledgeable
Posts: 3335 Joined: Wed Feb 16, 2005 9:40 pmLocation: Oregon
Post
by 555BCTurbo Wed Mar 21, 2007 11:40 pm
You will need to snip the ECU ID wire...that is it
Nick
Legacy777
Site Admin
Posts: 27928 Joined: Tue Oct 15, 2002 11:37 amLocation: Houston, Tx
Contact:
Post
by Legacy777 Thu Mar 22, 2007 5:48 pm
You may need to mess with the positive leads for the cam & crank sensors....depending on what wiring harness you are using.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
theboyo19
In Neutral
Posts: 5 Joined: Wed Mar 21, 2007 1:11 am
Post
by theboyo19 Thu Mar 22, 2007 9:51 pm
do i need the ej22t ecu or can i use my ej22?
BSOD2600
Fourth Gear
Posts: 1636 Joined: Tue Sep 12, 2006 6:49 amLocation: Seattle, WA
Post
by BSOD2600 Fri Mar 23, 2007 6:57 am
IIRC, one must use an EJ22T ECU since they are different.
'11 WRX Limited '94 SS | 3" TBE, 07 TMIC, TD05H-16G, Revtronix Stage 2, Walbro -- Sold '94 TW | R.I.P.
555BCTurbo
Knowledgeable
Posts: 3335 Joined: Wed Feb 16, 2005 9:40 pmLocation: Oregon
Post
by 555BCTurbo Fri Mar 23, 2007 7:38 am
BSOD2600 wrote: IIRC, one must use an EJ22T ECU since they are different.
Correct you are...
Unless your name is Doug Vincent...
Nick
