Top hats vs top mounts

Struts, spring, anti-rollbars, braces and the like.

Moderators: Helpinators, Moderators

Post Reply
macipusy
Third Gear
Posts: 787
Joined: Wed Aug 22, 2007 9:27 pm
Location: Denver, CO

Top hats vs top mounts

Post by macipusy »

I willl be installing the GC coilovers with KYB AGX on a 91 SS....the coilovers include spring top hats.....

So I need to go buy 93-01 Impreza rear top mounts?
Is this correct....I'm just a little confused on the top hats vs top mounts...please clarify so I can go buy the parts at a junkyard over lunch


Thanks
maciek puszynski

01 Impreza | v6 STi RA | 5mt | ej236t
93 Legacy Turbo | TW | 4eat | ej22t
16 WRX | 6mt | fa20
98 Legacy GT | wagon | 5mt | ej25d


2.36L Turbo - RSTi Build
jamal
Vendor
Vendor
Posts: 2485
Joined: Thu Dec 11, 2003 11:34 am
Location: Missoula
Contact:

Post by jamal »

top hat, top mount, strut top, etc are all terms for the same thing. This dealie is what you want:

Image

You can find them in any AWD 92-94 Legacy or 93-01 Impreza.

Your ground control sleeves come with spring perches so you don't need to worry about tthem.
macipusy
Third Gear
Posts: 787
Joined: Wed Aug 22, 2007 9:27 pm
Location: Denver, CO

Post by macipusy »

How much do these run from a dealer? Anyone have a ballpark?
maciek puszynski

01 Impreza | v6 STi RA | 5mt | ej236t
93 Legacy Turbo | TW | 4eat | ej22t
16 WRX | 6mt | fa20
98 Legacy GT | wagon | 5mt | ej25d


2.36L Turbo - RSTi Build
jamal
Vendor
Vendor
Posts: 2485
Joined: Thu Dec 11, 2003 11:34 am
Location: Missoula
Contact:

Post by jamal »

Group N parts, which are harder rubber, run $110 a set from online places. oakos is sold out though.
macipusy
Third Gear
Posts: 787
Joined: Wed Aug 22, 2007 9:27 pm
Location: Denver, CO

Post by macipusy »

Nobody has them....sucks...my install day is ruined....

What is the reason that the stock ones will not work?
maciek puszynski

01 Impreza | v6 STi RA | 5mt | ej236t
93 Legacy Turbo | TW | 4eat | ej22t
16 WRX | 6mt | fa20
98 Legacy GT | wagon | 5mt | ej25d


2.36L Turbo - RSTi Build
Adam West
Fourth Gear
Posts: 1322
Joined: Wed Mar 09, 2005 10:04 pm
Location: Seattle, WA
Contact:

Post by Adam West »

93SS 5MT White, TD05-16G, TMIC, 3"Turboback, Magnaflow, Alu Rad, H&R Sports, AGX struts, F/R STBs, Whiteline Sways, ALK+Endlinks, Odyssey 925, AC delete, Evo8 Recaros, Sparco 4p, 3.9 LSD, Hellas+air horns, IPD short throw, 99RSrims, s03's
jamal
Vendor
Vendor
Posts: 2485
Joined: Thu Dec 11, 2003 11:34 am
Location: Missoula
Contact:

Post by jamal »

90-91 Legacies have different rear mounts that look like this:

Image

You could try to use them but I am pretty certain they won't work.
ej22t kid
First Gear
Posts: 107
Joined: Sun Jul 24, 2005 8:09 pm
Location: about an hour from sacramento

Post by ej22t kid »

test fit the rear upper spring perch to the legacy upper mount. Depending on what kit you ordered you should be able to use the legacy mt or a WRX rear mt.

ps. you can probably get a mt from GC . it is an aluminum disc that uses hard urethane bushings. only you have to sand about half an inch off the inside because of the way the tower is shaped. bout $129
(91 turbo sleeper to be)- RIP

I miss my legacy :(
Post Reply