well, but if i am out for a 'drive' where the roads are fun and i wana push
the car harder i usually make them as stiff as possible, caution pot holes
are a bitch at this setting
> Adam,
>
> Question I have for you is what dampin do you run.....did you crank the
> valving closed a little bit.....or how have you setup your struts to
> match the whiteline springs?
>
> Thanks
>
> Josh
>
> -----Original Message-----
> From: Adam Archibald [mailto:adam@mymindseye.ca]
> Sent: Thu 6/20/2002 9:52 AM
> To: BC-BFLegacyWorks@yahoogroups.com
> Cc:
> Subject: Re: [BC-BFLegacyWorks] Re: [BC-BFLegacyWorks - Springs
>
>
>
> I have my legacy turbo running KYB AGX struts paired with whiteline
> legacy select springs (these are one of the few springs made for our
> car). The setup works very well and i have no complaints as of
yet.
> Was also pleased with the amount the springs lowered my car. Only
> about 1-1.5 inches, just enought to make it look better and get it a
> little closer to the ground for handling but not enough to be scared
> of monster speed bumps.
> my 2 cents...
> -Adam
>
> > Having just bought my Legacy, I am gathering parts this week as a
> > some basic upgrades..have a few questions:
> >
> > 1. Suspension - is tehre a Legacy Turbo specific part number for
KYB
> > struts, or do I jsut use one for a 2.5RS/GC8? Are the AGX's
worth
> > the extra cash (I am a dealer), or do they not work great on this
> > car)..I know on many cars, they are not valved too great, and are
> > not really worth the extra cash (I found my GVR4 to be like
this).
> >
> > 2. Springs: aside from H&R, are there springs specifically for the
> > Legacy turbo (what is the chassis code again?) Can I use springs
> > intended for a Gc8? anyone have experience with Tein Springs for
> > this car, or Eibach...we are a dealer for both
> >
> > 3. Swaybars and strut braces: I figure Whiteline is the way to go
> > for swaybars, but want ones that are the best fitting (sometimes,
> > Whitelines haev minor fitment issues). How about strut braces?
> > Will the front from a GC8 fit? How about the lower arm braces,
> > like the Cusco Type 2 (the H shaped one)...does it fit? I
figured
> > it would as the WRX model GC8 and Legacy Turbo share a x-member,
> > but just want to be sure
> >
> > Thanks guys!
> >
> > adam
> > Z-1 Performance
> > www.z1auto.com
> >
> > ------------------------
> > ---------------------~--> Free $5 Love Reading
> > Risk Free!
> > http://us.click.yahoo.com/3PCXaC/PfREAA ... /XoTolB/TM
> > ------------------------------------------------------------------
---~->
> >
> > To unsubscribe from this group, please send an email to:
> > BC-BFLegacyWorks-unsubscribe@egroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
>
>
>
>
> ------------------------
> ---------------------~--> Free $5 Love Reading
> Risk Free!
> http://us.click.yahoo.com/3PCXaC/PfREAA ... /XoTolB/TM
> --------------------------------------------------------------------
-~->
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
>
> ------------------------
> ---------------------~--> Free $5 Love Reading
> Risk Free!
> http://us.click.yahoo.com/3PCXaC/PfREAA ... /XoTolB/TM
> ---------------------------------------------------------------------~->
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
------------------------ ---------------------~-->
Free $5 Love Reading
Risk Free!
http://us.click.yahoo.com/3PCXaC/PfREAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com