91 Legacy Wagon Front Passenger side Power Window issue....

Headlights to tailights and everything in between.

Moderators: Helpinators, Moderators

Post Reply
aesalinas45
In Neutral
Posts: 8
Joined: Tue Dec 15, 2009 10:15 pm

91 Legacy Wagon Front Passenger side Power Window issue....

Post by aesalinas45 »

Front Passenger side Power Window rolls down but does not roll up. removed power regulator and tested on rear door connection and regulator works both up and down. Swapped switches and still no luck with front connection. Could it be a wiring issue or ground somewhere?
Legacy777
Site Admin
Site Admin
Posts: 27928
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Post by Legacy777 »

Welcome to the BBS. It could be a wiring issue. The wiring is all tied back to the driver's switch. So you could have an issue with the driver's switch which could be causing the problem, or possibly wiring to the driver's switch.

Here are the wiring diagrams for the 90 legacy. They should be the same for the 91 Legacy. Take a look at the diagram for the power windows, and it may make some more sense how they have these things wired.

http://main.experiencetherave.com/subar ... agrams.zip
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
aesalinas45
In Neutral
Posts: 8
Joined: Tue Dec 15, 2009 10:15 pm

Post by aesalinas45 »

Thanks! This will come in handy.
aesalinas45
In Neutral
Posts: 8
Joined: Tue Dec 15, 2009 10:15 pm

Post by aesalinas45 »

I Replaced the drivers switch and all back to normal. :)
1991 Subaru Legacy Wagon
Post Reply