91 Legacy Wagon Front Passenger side Power Window issue....
Moderators: Helpinators, Moderators
-
- In Neutral
- Posts: 8
- Joined: Tue Dec 15, 2009 10:15 pm
91 Legacy Wagon Front Passenger side Power Window issue....
Front Passenger side Power Window rolls down but does not roll up. removed power regulator and tested on rear door connection and regulator works both up and down. Swapped switches and still no luck with front connection. Could it be a wiring issue or ground somewhere?
Welcome to the BBS. It could be a wiring issue. The wiring is all tied back to the driver's switch. So you could have an issue with the driver's switch which could be causing the problem, or possibly wiring to the driver's switch.
Here are the wiring diagrams for the 90 legacy. They should be the same for the 91 Legacy. Take a look at the diagram for the power windows, and it may make some more sense how they have these things wired.
http://main.experiencetherave.com/subar ... agrams.zip
Here are the wiring diagrams for the 90 legacy. They should be the same for the 91 Legacy. Take a look at the diagram for the power windows, and it may make some more sense how they have these things wired.
http://main.experiencetherave.com/subar ... agrams.zip
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- In Neutral
- Posts: 8
- Joined: Tue Dec 15, 2009 10:15 pm
-
- In Neutral
- Posts: 8
- Joined: Tue Dec 15, 2009 10:15 pm