Done some searching and haven't been able to come up with a definitive answer. When rebuilding a 22t block with forged pistons and rods, what is the size of 2.2t rods? When looking at eagle rods they list the 1.8, 2.0 and 2.2 as the same Part # and length so I am assuming that those engines all used the same rod lengths. Am I correct?
-Logan
22t connecting rod length
Moderators: Helpinators, Moderators
22t connecting rod length
VF43 custom FMIC APEXI intake Invidia 3" TBE JDM Ver. 4 RA STi trans (4.44) SPT short shifter rear LSD WRX rear axels coilover suspension JDM 4-pot front brakes drilled slotted rottors Greddy EBC tuned 20G ECU sti 550cc injectors Jecs MAF walbro 255
Re: 22t connecting rod length
I know for sure the 2.0L WRX and 2.5L STi/WRX rods are the same length as 22t rods...5.137" (130.5mm)
maciek puszynski
01 Impreza | v6 STi RA | 5mt | ej236t
93 Legacy Turbo | TW | 4eat | ej22t
16 WRX | 6mt | fa20
98 Legacy GT | wagon | 5mt | ej25d
2.36L Turbo - RSTi Build
01 Impreza | v6 STi RA | 5mt | ej236t
93 Legacy Turbo | TW | 4eat | ej22t
16 WRX | 6mt | fa20
98 Legacy GT | wagon | 5mt | ej25d
2.36L Turbo - RSTi Build
Re: 22t connecting rod length
These are the rods you want. There's only one
http://main.experiencetherave.com/subar ... G_1945.JPG
http://main.experiencetherave.com/subar ... G_1945.JPG
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
mike-tracy
- Moderator
- Posts: 5000
- Joined: Tue Aug 25, 2009 7:52 am
- Location: Des Moines, Wa
Re: 22t connecting rod length
Haha, those are what, $400+ for the 4? STI rods are cheap and stronger than what 99% of us will ever need on these engines.Legacy777 wrote:These are the rods you want. There's only one
http://main.experiencetherave.com/subar ... G_1945.JPG
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: ↑Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
Re: 22t connecting rod length
He was specifically asking what the Eagle part # was....which is why I posted that.....
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm