Need help Heater not working
Moderators: Helpinators, Moderators
Need help Heater not working
Hi i'm new here and last week i bought a 92 Legacy Sedan 4EAT and the first thing i noticed is that the heater isn't working....or is it the fans? i'm not too sure....i mean the rear defroster seems to work and after a little bit i feel heat but i think it might just be from the engine...i'm not sure...the buttons for the heat and defrost work but when i change the dial's i get nothing...if someone could give me some insite on this it would be helpful or some alternatives....I live in Madison Wi, and i'm gonna nead warmth fast
Re: Need help Heater not working
Possibly worth looking into: http://bbs.legacycentral.org/viewtopic.php?f=10&t=1142
Do you feel air out of the vents when the fan is on and a button is pushed?
Coolant is always circulating through the heater core, so it's jut a matter of having the selector lever in the correct position to give you heat or outside air. When you move the lever, it should have some resistance and you'll hear a door moving in the HVAC ducts.
Do you feel air out of the vents when the fan is on and a button is pushed?
Coolant is always circulating through the heater core, so it's jut a matter of having the selector lever in the correct position to give you heat or outside air. When you move the lever, it should have some resistance and you'll hear a door moving in the HVAC ducts.
'11 WRX Limited
'94 SS | 3" TBE, 07 TMIC, TD05H-16G, Revtronix Stage 2, Walbro -- Sold
'94 TW | R.I.P.
Re: Need help Heater not working
I feel air but it feels likes it's coming just from the engine...i don't hear anything like air blowing or anything...and when i try to change the fan setting from like 1-4 (or is it 5?) it doesn't do anything...if it's warm tommorrow i might try getting back there but i'm a big man...and don't know exactly where or what to look for..
-
- Fifth Gear
- Posts: 8360
- Joined: Mon Nov 06, 2006 3:41 am
- Location: Tenino, WA
Re: Need help Heater not working
Directly under the glovebox is the blower motor. It comes out with 3 screws. Remove the glovebox and it's very easy to take out. You could see if it's getting power.
98 Metro Hatch Daily Driver :)
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
Re: Need help Heater not working
cool cool....thank you
Re: Need help Heater not working
I found a heater core for a 97 outback and was wondering if it would fit in my 92
Re: Need help Heater not working
I would have my doubts it would work. It may, but I'd be rather skeptical
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
Re: Need help Heater not working
me too looking at some pics it looks like it might but then again i'm not sure does anyone have any pics of the two?