MRT Master cylinder bracket.

rally370 · Post by **rally370** » Wed Sep 22, 2004 4:32 pm

I forgot to tell you that fitting the MRT bracket and braided lines made a big different to the brake pedal feel.Get someone to push the brake pedal while you look at the master cylinder and you be amazed how much it moves.
I fitted the bracket in about 30 mins but did have to drill the rear holes bigger to fit it.

Cheers

Chris

Post by **Legacy777** » Thu Sep 23, 2004 2:45 am

yeah....it's pretty crazy to notice how much it does move. Even with the brace on there it still moves a little.

wow 30 min.....took me much longer. None of the damn bolts would line up/start on the firewall.

BAC5.2 · Post by **BAC5.2** » Thu Sep 23, 2004 3:05 am

Anyone got pics of the brace?

Post by **Legacy777** » Thu Sep 23, 2004 2:23 pm

need you ask

http://www.main.experiencetherave.com:8 ... acket1.jpg
http://www.main.experiencetherave.com:8 ... acket2.jpg
http://www.main.experiencetherave.com:8 ... acket3.jpg

there's some various pics scattered in this page
http://www.main.experiencetherave.com:8 ... egswap/09/

there's a pic from beneath on this page
http://www.main.experiencetherave.com:8 ... egswap/10/

rally370 · Post by **rally370** » Thu Sep 23, 2004 4:02 pm

Josh

It only took about 30 mins because I put the bracket there first and checked the holes.I noticed the two rears were not in line so I drilled the holes bigger.Job done
I also made my own clutch center tool with a piece of wood dowel through a 17mm socket,worked a treat.
Thanks for the photo links.

Cheers

Chris

BAC5.2 · Post by **BAC5.2** » Thu Sep 23, 2004 4:02 pm

Josh, for some reason your website takes FOREVER to load pics on my computer. And it's only your site.

I STILL haven't seen the shift linkage install pics

Post by **Legacy777** » Thu Sep 23, 2004 6:14 pm

hmmm

They are on my personal server, so that may be why it takes longer. What internet connection speed do you have?

BAC5.2 · Post by **BAC5.2** » Thu Sep 23, 2004 6:15 pm

College Ethernet...

totech · Post by **totech** » Fri Sep 24, 2004 4:07 am

BAC5.2 wrote:Josh, for some reason your website takes FOREVER to load pics on my computer. And it's only your site.

I STILL haven't seen the shift linkage install pics

I cannot see them because of the port number - same as my proxy server

BAC5.2 · Post by **BAC5.2** » Fri Sep 24, 2004 5:50 am

Which means...

Post by **Legacy777** » Fri Sep 24, 2004 2:07 pm

Try these. It'll give you a pop up about the certificate not matching, but you should at least be able to view them. You can do this for any of the links/pics I post. Change it to https and get rid of the 8080 port.

https://www.main.experiencetherave.com/ ... acket1.jpg
https://www.main.experiencetherave.com/ ... acket2.jpg
https://www.main.experiencetherave.com/ ... acket3.jpg

there's some various pics scattered in this page
https://www.main.experiencetherave.com/ ... egswap/09/

there's a pic from beneath on this page
https://www.main.experiencetherave.com/ ... egswap/10/

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

MRT Master cylinder bracket.

MRT Master cylinder bracket.