Headlights to tailights and everything in between.
Moderators: Helpinators , Moderators
crashnburn
First Gear
Posts: 152 Joined: Wed Feb 10, 2010 9:19 amLocation: Covington, WA
Post
by crashnburn Wed Feb 17, 2010 8:27 am
so i have a 91 ss. it has a aftermarket steering wheel and i have noticed that the turn signal remains on and does not turn off after completing the turn. I have to manual turn off the turn signal. Is the clockspring damaged? or is it because i have a aftermarket steering wheel?
91 Legacy SS 440s, vf39, FMIC, LSD, Revtronix Stage 2, MSD Coil
SubiePrice88
Third Gear
Posts: 617 Joined: Thu Dec 13, 2007 5:41 amLocation: Spokane,Wa
Post
by SubiePrice88 Wed Feb 17, 2010 8:34 am
hmm.... dont think its the steering wheel...I have a JDM legacy wheel and dont have any problems
-Jordan
asc_up
Fifth Gear
Posts: 2473 Joined: Sun Sep 10, 2006 9:15 amLocation: University Place, WA
Post
by asc_up Wed Feb 17, 2010 6:36 pm
It's because of some 'piece' that was supposed to come with the JDM WRX wheel. Unfortunately, the guy didn't have it when he sold me the wheel.
-Aaron
crashnburn
First Gear
Posts: 152 Joined: Wed Feb 10, 2010 9:19 amLocation: Covington, WA
Post
by crashnburn Wed Feb 24, 2010 7:34 pm
i think you are referring to the clock spring. does anyone know if a clock spring from a different Subaru will work or does it need to be from the same vehicle.
91 Legacy SS 440s, vf39, FMIC, LSD, Revtronix Stage 2, MSD Coil
crashnburn
First Gear
Posts: 152 Joined: Wed Feb 10, 2010 9:19 amLocation: Covington, WA
Post
by crashnburn Thu Feb 25, 2010 8:40 am
91 Legacy SS 440s, vf39, FMIC, LSD, Revtronix Stage 2, MSD Coil
crashnburn
First Gear
Posts: 152 Joined: Wed Feb 10, 2010 9:19 amLocation: Covington, WA
Post
by crashnburn Mon Mar 01, 2010 5:41 am
would replacing the whole clockspring unit with the turnsignal work?
91 Legacy SS 440s, vf39, FMIC, LSD, Revtronix Stage 2, MSD Coil
